Method for milling and drilling glass

A process for machining glass by placing a rotating carbide working surface under minimum pressure against an area of glass to be worked is described. Concurrently the region between the working surface and the area of glass is wet with a lubricant consisting essentially of a petroleum carrier, a complex mixture of esters and a complex mixture of naturally occurring aromatic oils

Some expansions associated with Bessel functions

An Expansion for the Product of Two Bessel Functions.-1.1. An expansion for the product of two Bessel functions obtained by one of us(1) led to the discovery of a different expansion for the said product multiplied by the leading terms in the power series for the Bessel functions. Two proofs of this second expansion are given here

An interferometer based phase control system

An interferometer based phase control system for focusing and pointing the solar power satellite (SPS) power beam is discussed. The system is ground based and closed loop. One receiving antenna is required on Earth. A conventional uplink data channel transmits an 8 bit phase error correction back to the SPS for sequential calibration of each power module. Beam pointing resolution is better than 140 meters at the rectenna

A power satellite sonic simulator

A simulator is described which generates and transmits a beam of audible sound energy mathematically similar to the solar power satellite (SPS) power beam. The simulator provides a laboratory means for analysis of ground based closed loop SPS phase control and of ionospheric effects on the SPS microwave power beam

Sonic simulation of the SPS power beam

A Satellite Power System Microwave Transmission Simulator is described. The simulator generates and transmits a beam audible sound energy which is mathematically similar to the microwave beam which would transmit energy to Earth from a Solar Power Satellite. This allows areas such as power beam formation to be studied in a laboratory environment

A sonic satellite power system microwave power transmission simulation

A simulator is described which generates and transmits a beam of audible sound energy mathematically similar to the SPS power beam. The simulator provides a laboratory means for analysis of ground based closed loop SPS phase control and of ionospheric effects on the SPS microwave power beam

Beat frequency interference pattern characteristics study

The frequency spectra and corresponding beat frequencies created by the relative motions between multiple Solar Power Satellites due to solar wind, lunar gravity, etc. were analyzed. The results were derived mathematically and verified through computer simulation. Frequency spectra plots were computer generated. Detailed computations were made for the seven following locations in the continental US: Houston, Tx.; Seattle, Wa.; Miami, Fl.; Chicago, Il.; New York, NY; Los Angeles, Ca.; and Barberton, Oh

A theoretical study of microwave beam absorption by a rectenna

The rectenna's microwave power beam absorption limit was theoretically confirmed by two mathematical models descriptive of the microwave absorption process; first one model was based on the current sheet equivalency of a large planar array above a reflector and the second model, which was based on the properties of a waveguide with special imaging characteristics, quantified the electromagnetic modes (field configurations) in the immediate vicinity of a Rectenna element spacing which permit total power beam absorption by preventing unwanted modes from propagating (scattering) were derived using these models. Several factors causing unwanted scattering are discussed

Emulating a flexible space structure: Modeling

Control Dynamics, in conjunction with Marshall Space Flight Center, has participated in the modeling and testing of Flexible Space Structures. Through the series of configurations tested and the many techniques used for collecting, analyzing, and modeling the data, many valuable insights have been gained and important lessons learned. This paper discusses the background of the Large Space Structure program, Control Dynamics' involvement in testing and modeling of the configurations (especially the Active Control Technique Evaluation for Spacecraft (ACES) configuration), the results from these two processes, and insights gained from this work

Sea turtle nesting in the Ten Thousand Islands of Florida

Loggerhead sea turtles (Caretta caretta) nest in numerous substrate and beach types within the Ten Thousand Islands (TTl) of southwest Florida. Nesting beach selection was analyzed on 12 islands within this archipelago. Numerous physical characteristics were recorded to identify the relatedness of these variables and determine their importance for nesting beach selection in C. caretta. These variables were chosen after evaluating the islands, conducting literature searches and soliciting personal communications. Along transects, data were collected, on the following: height of canopy, beach width, overall slope (beach slope and slope of offshore approach) and sand samples analyzed for pH, percentage of water, percentage of organic content, percentage of carbonate and particle size (8 size classes). Data on ordinal aspect of beaches and beach length were also recorded and included in the analysis. All of the variables were analyzed by tree regression, incorporating the nesting data into the analysis. In the TTl, loggerheads appear to prefer wider beaches (p< 0.001; R2 = 0.56) that inherently have less slope, and secondarily, wider beaches that have low amounts of carbonate (p< O.00 1). In addition, C. caretta favors nest sites within or in close proximity to the supra-littoral vegetation zone of beaches in the TTl (p< 0.001). (86 page document