A new analysis of 14O beta decay: branching ratios and CVC consistency

The ground-state Gamow-Teller transition in the decay of 14O is strongly hindered and the electron spectrum deviates markedly from the allowed shape. A reanalysis of the only available data on this spectrum changes the branching ratio assigned to this transition by seven standard deviations: our new result is (0.54 \pm 0.02)%. The Kurie plot data from two earlier publications are also examined and a revision to their published branching ratios is recommended. The required nuclear matrix elements are calculated with the shell model and, for the first time, consistency is obtained between the M1 matrix element deduced from the analog gamma transition in 14N and that deduced from the slope of the shape-correction function in the beta transition, a requirement of the conserved vector current hypothesis. This consistency is only obtained, however, if renormalized rather than free-nucleon operators are used in the shell-model calculations. In the mirror decay of 14C a similar situation occurs. Consistency between the 14C lifetime, the slope of the shape-correction function and the M1 matrix element from gamma decay can only be achieved with renormalized operators in the shell-model calculation.Comment: 9 pages; revtex4; one figur

Beach impact study, Padre Island National Seashore

Prepared for Office of Natural Science, Southwest Region, National Park Service, under contract CX70005044830 April 1976Vegetative differences between heavily and very lightly trafficked beaches show that more beach traffic correlates with quantitative decreases in variety and density of plants and with declines of grasses relative to forbs. The vegetated portions of all beaches continue to grow in volume. However, this is at the expense of the more seaward (more trafficked) parts of the beaches and has lead to overall loss of total beach volume except where vehicular traffic is prohibited. The very lightly trafficked beach is the only study site wherein the entire beach to mean sea level has grown. The effect of these trends on resistance to storm surge erosion remains to be tested.Marine Scienc

Influences on the formability and mechanical properties of 7000-aluminum alloys in hot and warm forming

Aluminum alloys of the 7000 series possess high lightweight potential due to their high specific tensile strength combined with a good ultimate elongation. For this reason, hot-formed boron-manganese-steel parts can be substituted by these alloys. Therefore, the application of these aluminum alloys for structural car body components is desired to decrease the weight of the body in white and consequently CO2 emissions during vehicle operation. These days, the limited formability at room temperature limits an application in the automobile industry. By increasing the deformation temperature, formability can be improved. In this study, two different approaches to increase the formability of these alloys by means of higher temperatures were investigated. The first approach is a warm forming route to form sheets in T6 temper state with high tensile strength at temperatures between 150 °C and 300 °C. The second approach is a hot forming route. Here, the material is annealed at solution heat treatment temperature and formed directly after the annealing step. Additionally, a quench step is included in the forming stage. After the forming and quenching step, the sheets have to be artificially aged to achieve the high specific tensile strength. In this study, several parameters in the presented process routes, which influence the formability and the mechanical properties, have been investigated for the aluminum alloys EN AW7022 and EN AW7075. © Published under licence by IOP Publishing Ltd

Mechanical properties and formability of en AW-7075 in cold forming processes

Due to a low density and high tensile strength, the aluminum alloy EN AW 7075 T6 offers a high lightweight potential for structural components. Since its formability is limited at room temperature in the T6 temper state, the potential of this alloy for automotive bodies is only utilizable by adapted deep drawing processes. In recent years, process chains suited for warm and hot forming have been researched and developed. However, warm and hot forming solutions require additional process steps and a complex tooling system in comparison to cold forming processes. Alternatively, the forming of such blanks at room temperature in the W temper state is favorable since conventional tools can be used. The W temper state is a heat treatment condition achieved after solution heat treatment and subsequent quenching, which is characterized by an increased ductility. However, this condition is unstable, due to the onset of natural ageing. With increasing time after the quenching step, the strength of the material increases, which leads to a reduction of formability. Another phenomenon that occurs after quenching is the Portevin Le-Chatelier effect. This effect causes the formation of flow lines during cold forming and results in a decrease of ductility. Hence, the objective of the investigations was to determine the formability of EN AW 7075 as a function of the natural ageing time after solution heat treatment and quenching. Therefore, tensile tests of various aged samples were carried out. The results show a relation of the formability to the natural ageing time and a dependency on the quenching rate. Furthermore, a heat treatment strategy for EN AW-7075 was developed, that considers manufacturing processes like the cathodic dip coating. The influence of the quenching rate, ageing time and temperature as well as the influence of temperature of the paint baking process after the cathodic dip coating were considered. Therefore, a design of experiments and tensile tests were carried out. Thus, the deep drawing of EN AW-7075 at room temperature is particularly promoted. © 2020 Published under licence by IOP Publishing Ltd

Neutrino and antineutrino charge-exchange reactions on 12C

We extend the formalism of weak interaction processes, obtaining new expressions for the transition rates, which greatly facilitate numerical calculations, both for neutrino-nucleus reactions and muon capture. Explicit violation of CVC hypothesis by the Coulomb field, as well as development of a sum rule approach for the inclusive cross sections have been worked out. We have done a thorough study of exclusive (ground state) properties of $^{12}$B and $^{12}$N within the projected quasiparticle random phase approximation (PQRPA). Good agreement with experimental data achieved in this way put in evidence the limitations of standard RPA and the QRPA models, which come from the inability of the RPA in opening the $p_{3/2}$ shell, and from the non-conservation of the number of particles in the QRPA. The inclusive neutrino/antineutrino ($\nu/\tilde{\nu}$) reactions $^{12}$C($\nu,e^-)^{12}$N and $^{12}$C($\tilde{\nu},e^+)^{12}$B are calculated within both the PQRPA, and the relativistic QRPA (RQRPA). It is found that the magnitudes of the resulting cross-sections: i) are close to the sum-rule limit at low energy, but significantly smaller than this limit at high energies both for $\nu$ and $\tilde{\nu}$, ii) they steadily increase when the size of the configuration space is augmented, and particulary for $\nu/\tilde{\nu}$ energies $> 200$ MeV, and iii) converge for sufficiently large configuration space and final state spin. The quasi-elastic $^{12}$C($\nu,\mu^-)^{12}$N cross section recently measured in the MiniBooNE experiment is briefly discussed. We study the decomposition of the inclusive cross-section based on the degree of forbiddenness of different multipoles. A few words are dedicated to the $\nu/\tilde{\nu}$-$^{12}$C charge-exchange reactions related with astrophysical applications.Comment: 21 pages, 13 figures, 1 table, submitted to Physical Review

Two-Body B Meson Decays to η and η': Observation of B → η'K

In a sample of 6.6×10^6 produced B mesons we have observed decays B→η′K, with branching fractions B(B^+→η′K^+) = (6.5_(-1.4)^(+1.5)±0.9)×10^(-5) and B(B^0→η′K^0) = (4.7_(-2.0)^(+2.7)±0.9)×10^(-5). We have searched with comparable sensitivity for 17 related decays to final states containing an η or η′ meson accompanied by a single particle or low-lying resonance. Our upper limits for these constrain theoretical interpretations of the B→η′K signal

Observation of Flux Reversal in a Symmetric Optical Thermal Ratchet

We demonstrate that a cycle of three holographic optical trapping patterns can implement a thermal ratchet for diffusing colloidal spheres, and that the ratchet-driven transport displays flux reversal as a function of the cycle frequency and the inter-trap separation. Unlike previously described ratchet models, the approach we describe involves three equivalent states, each of which is locally and globally spatially symmetric, with spatiotemporal symmetry being broken by the sequence of states.Comment: 4 pages, 2 figures, submitted for publication in Physical Review Letter

A study of semi-inclusive charmless B→πXB \to \pi X decays

We study semi-inclusive charmless decays $B \to \pi X$ in detail, such as $\bar B^0 \to \pi^{\pm (0)} X$, $B^0 \to \pi^{\pm (0)} X$, $B^{\pm} \to \pi^{\pm (0)} X$, where $X$ does not contain a charm (anti)quark. We find that the process $\bar B^0 \to \pi^- X$ ($B^0 \to \pi^+ X$) can be particularly useful for determination of the CKM matrix element $|V_{ub}|$. We calculate and present the branching ratio (BR) of $\bar B^0 \to \pi^- X$ as a function of $|V_{ub}|$, with an estimate of possible uncertainties. It is expected that the BR is an order of $10^{-4}$. Our estimation indicates that one can phenomenologically determine $|V_{ub}|$ with reasonable accuracy by measuring the BR of $\bar B^0 \to \pi^- X$ ($B^0 \to \pi^+ X$).Comment: 18 pages, 7 figures; Revtex; version accepted for publication in Eur. Phys. J.

Office-based Air-Fluid Exchange for Diabetic Post-Operative Vitreous Cavity Hemorrhage

Post-operative vitreous cavity hemorrhage (POVCH) is observed in 6-75% of eyes undergoing pars plana vitrectomy (PPV) for proliferative diabetic retinopathy (PDR). We describe our technique for office-based Air fluid exchange (AFX) in the treatment of POVCH. Sixteen eyes (15 patients) with PDR and POVCH undergoing office-based AFX between January 2006 and November 2016 were retrospectively identified. The pre- and post- procedure visual acuity (VA) and complications were compared between eyes with and without traction retinal detachment (TRD). Medicare charges for office-based AFX versus PPV were also analyzed. Mean age at the time of AFX was 55.31 (± 8.02) years. Nine eyes (56.25%) had TRD prior to PPV and 11 eyes (68.75%) were pseudophakic. The improvements in mean (± standard deviation [SD]) logMAR VA at the last postoperative visit (3 - 8 months) were 1.38 (± 0.99), 0.82 (± 0.91) and 2.09 (± 0.53) in all eyes, TRD eyes and non-TRD eyes, respectively. Complications included cataract progression, hypotony, and recurrence of TRD and ghost cell glaucoma. The total cost of outpatient AFX was $1,409.59 less than that of PPV. Office-based AFX is a cost-effective alternative treatment for non-clearing diabetic POVCH with an acceptable risk profile

Fuzzy Fibers: Uncertainty in dMRI Tractography

Fiber tracking based on diffusion weighted Magnetic Resonance Imaging (dMRI) allows for noninvasive reconstruction of fiber bundles in the human brain. In this chapter, we discuss sources of error and uncertainty in this technique, and review strategies that afford a more reliable interpretation of the results. This includes methods for computing and rendering probabilistic tractograms, which estimate precision in the face of measurement noise and artifacts. However, we also address aspects that have received less attention so far, such as model selection, partial voluming, and the impact of parameters, both in preprocessing and in fiber tracking itself. We conclude by giving impulses for future research