Measurement of local creep properties in stainless steel welds

A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section type 316 stainless steel multi-pass welded joint are presented and discussed. Significantly lower creep strain rates are observed in the HAZ than in the parent material which is attributed to the introduction of substantial plastic strain in the parent material on initial loading. The weld metal shows the fastest creep rates and a variation that appear to correlate with individual weld passes. The visual information provides not only the local creep strain distribution but also the reduction of area and true stress distribution based on strains measured in the transverse direction. The results demonstrate the capability of the DIC technique for full field measurement of displacement and strain at high temperature long term creep tests

Clarification of the Nature of the Galaxy CFC97 Cen 05

The galaxy CFC97 Cen 05 has in the past been considered an HI-rich dwarf galaxy in the nearby Centaurus A group. We have used Australia Telescope Compact Array observations to show that the HI associated with CFC97 Cen 05 by Cote et al. (1997) is most likely a Galactic High Velocity Cloud that is centered ~17' from the optical image of the galaxy. At the optical location of the galaxy, which is not that tabulated by Banks et al. (1999), there is no indication of the presence of HI for velocities less than the upper limit of the HIPASS survey at ~12,500 km/s. In addition, WFPC2 images of CFC97 Cen 05 obtained from the HST Archive reveal that this galaxy is in fact not a dwarf at all, but rather is a distant background spiral not associated with the Centaurus A group.Comment: accepted for publication in the PASP (November 2004

Asymmetric Cuts In The Contour Method For Residual Stress Measurement

The standard contour method is limited to sectioning test components into two symmetric halves. In this study a new approach is developed to deal with asymmetric cuts in the contour method of residual stress measurement. The proposed approach is demonstrated using finite element (FE) simulations and is validated experimentally using a series of asymmetric contour cuts and neutron diffraction measurements