Correlated enhancement of Hc2 and Jc in carbon nanotube-doped MgB2

The use of MgB2 in superconducting applications still awaits for the development of a MgB2-based material where both current-carrying performance and critical magnetic field are optimized simultaneously. We achieved this by doping MgB2 with double-wall carbon nanotubes (DWCNT) as a source of carbon in polycrystalline samples. The optimum nominal DWCNT content for increasing the critical current density, Jc is in the range 2.5-10%at depending on field and temperature. Record values of the upper critical field, Hc2(4K) = 41.9 T (with extrapolated Hc2(0) ~ 44.4 T) are reached in a bulk sample with 10%at DWCNT content. The measured Hc2 vs T in all samples are successfully described using a theoretical model for a two-gap superconductor in the dirty limit first proposed by Gurevich et al.Comment: 12 pages, 3 figure

High-Temperature Lightweight Ceramics with Nano-sized Ferrites for EMI Shielding: Synthesis, Characterization, and Potential Applications

The present study focuses on the synthesis and characterisation of a lightweight ceramic material with electromagnetic interference (EMI) shielding properties, achieved using mullite containing micrometre-sized hollow spheres (cenospheres) and CoFe2O4 nanoparticles. This research explores compositions with varying CoFe2O4 contents ranging from 0 up to 20 wt.%. Conventional sintering in an air atmosphere is carried out at a temperature between 1100 and 1300 °C. The addition of ferrite nanoparticles was found to enhance the process of sintering cenospheres, resulting in improved material density and mechanical properties. Furthermore, this study reveals a direct correlation between the concentration of ferrite nanoparticles and the electromagnetic properties of the material. By increasing the concentration of ferrite nanoparticles, the electromagnetic shielding effect of the material (saturation magnetisation (Ms ) and remanent magnetisation (Mr)) was observed to strengthen. These findings provide valuable insights into designing and developing lightweight ceramic materials with enhanced electromagnetic shielding capabilities. The synthe-sized ceramic material holds promise for various applications that require effective electromagnetic shielding, such as in the electronics, telecommunications, and aerospace industries

The interpretation of the field angle dependence of the critical current in defect-engineered superconductors

We apply the vortex path model of critical currents to a comprehensive analysis of contemporary data on defect-engineered superconductors, showing that it provides a consistent and detailed interpretation of the experimental data for a diverse range of materials. We address the question of whether electron mass anisotropy plays a role of any consequence in determining the form of this data and conclude that it does not. By abandoning this false interpretation of the data, we are able to make significant progress in understanding the real origin of the observed behavior. In particular, we are able to explain a number of common features in the data including shoulders at intermediate angles, a uniform response over a wide angular range and the greater discrimination between individual defect populations at higher fields. We also correct several misconceptions including the idea that a peak in the angular dependence of the critical current is a necessary signature of strong correlated pinning, and conversely that the existence of such a peak implies the existence of correlated pinning aligned to the particular direction. The consistency of the vortex path model with the principle of maximum entropy is introduced.Comment: 14 pages, 7 figure

Photoinduced superconducting nanowires in Gd-Ba-Cu-O films

We report the fabrication of high Tc superconducting wires by photodoping a GdBa2Cu3O{6.5} thin film. An optical near-field probe was used to locally excite carriers in the system at room temperature. Trapping of the photogenerated electrons define a confining potential for the conducting holes in the CuO planes. Spatially resolved reflectance measurements show the photogenerated nanowires to be ~ 250 nm wide. Electron diffusion, before electron capture, is believed to be responsible for the observed width of the wires.Comment: 8 pages, 3 figures Submitted to Appl. Phys. Let

Angular dependent vortex pinning mechanisms in YBCO coated conductors and thin films

We present a comparative study of the angular dependent critical current density in YBa2Cu3O7 films deposited on IBAD MgO and on single crystal MgO and SrTiO3 substrates. We identify three angular regimes where pinning is dominated by different types of correlated and uncorrelated defects. We show that those regimes are present in all cases, indicating that the pinning mechanisms are the same, but their extension and characteristics are sample dependent, reflecting the quantitative differences in texture and defect density. In particular, the more defective nature of the films on IBAD turns into an advantage as it results in stronger vortex pinning, demonstrating that the critical current density of the films on single crystals is not an upper limit for the performance of the IBAD coated conductors.Comment: 14 pages, 3 figures. Submitted to AP

Psuedo-isotropic upper critical field in cobalt-doped SrFe2As2 epitaxial films

The temperature and angular dependence of the upper critical field (Hc2) is reported for cobalt-doped SrFe2As2 epitaxial films between Tc and 0.5 K in pulsed magnetic fields up to 50 T. For H parallel c, Hc2 is close to a linear function of temperature, while in the perpendicular direction there is significant downward curvature that results in an Hc2 ratio (gamma = Hc2(perpendicular)/Hc2(parallel) that decreases nearly linearly with temperature, approaching gamma = 1 at low temperature with Hc2(0) = 47 T. We measure the complete upper-critical field phase diagram including angular dependence and model the data using a two band theory allowing us to determine the anisotropy of both bands, their relative diffusivities, and the relationship between BCS coupling constant matrix elements. We find an unusual relationship between the diffusivities of the two bands, with two anisotropic and opposite bands. This relationship is supported by the observation of a local maximum for Hc2(parallel) at low temperature

Anomalous Proximity Effect in Underdoped YBaCuO Josephson Junctions

Josephson junctions were photogenerated in underdoped thin films of the YBa$_2$Cu$_3$O$_{6+x}$ family using a near-field scanning optical microscope. The observation of the Josephson effect for separations as large as 100 nm between two wires indicates the existence of an anomalously large proximity effect and show that the underdoped insulating material in the gap of the junction is readily perturbed into the superconducting state. The critical current of the junctions was found to be consistent with the conventional Josephson relationship. This result constrains the applicability of SO(5) theory to explain the phase diagram of high critical temperature superconductors.Comment: 11 pages, 4 figure

Design of Force Fields from Data at Finite Temperature

We investigate the problem of how to obtain the force field between atoms of an experimentally determined structure. We show how this problem can be efficiently solved, even at finite temperature, where the position of the atoms differs substantially from the ground state. We apply our method to systems modeling proteins and demonstrate that the correct potentials can be recovered even in the presence of thermal noise.Comment: 10 pages, 1 postcript figure, Late

Rotational kinetics of absorbing dust grains in neutral gas

We study the rotational and translational kinetics of massive particulates (dust grains) absorbing the ambient gas. Equations for microscopic phase densities are deduced resulting in the Fokker-Planck equation for the dust component. It is shown that although there is no stationary distribution, the translational and rotational temperatures of dust tend to certain values, which differ from the temperature of the ambient gas. The influence of the inner structure of grains on rotational kinetics is also discussed.Comment: REVTEX4, 20 pages, 2 figure

implementation of energy efficient smart technologies at the urban territories of the arctic zone of russia

Special climate conditions and out-of-date energy system at the urban territories of the Arctic zone of Russia reinforce the need for the development of a new concept for the implementation of energy efficient smart technologies at these territories. In this regard, the article is focused on identifying the prospects for the development of the energy sector of the urban territories of the Arctic zone of Russia with the involvement of smart technologies. Methods of the study include system analysis and modeling, which allow authors to consider the prospects of implementing energy efficient smart technologies in a comprehensive manner. Article suggests the interpretation of the concept of "energy efficient smart technologies" determines the priorities and introduces the models for the implementation of these technologies at the urban territories of the Arctic zone of Russia. The proposed concept and models were developed taking into account the modern information and communication infrastructure of the given territories. Particular attention was paid to the complex of characteristics influence the implementation of energy efficient smart technologies at the urban territories of the Arctic zone of Russia