Magnetic Properties of the Novel Low-Dimensional Cuprate Na5RbCu4(AsO4)4Cl2

The magnetic properties of a new compound, Na5RbCu4(AsO4)4Cl2 are reported. The material has a layered structure comprised of square Cu4O4 tetramers. The Cu ions are divalent and the system behaves as a low-dimensional S=1/2 antiferromagnet. Spin exchange in Na5RbCu4(AsO4)4Cl2 appears to be quasi-two-dimensional and non-frustrated. Measurements of the bulk magnetic susceptibility and heat capacity are consistent with low-dimensional magnetism. The compound has an interesting, low-entropy, magnetic transition at T = 17 K.Comment: 4 pages, 5 figure

Quantitative study of molecular N_2 trapped in disordered GaN:O films

The structure of disordered GaN:O films grown by ion-assisted deposition is investigated using x-ray absorption near-edge spectroscopy and Raman spectroscopy. It is found that between 4 and 21 % of the nitrogen in the films is in the form of molecular N_2 that interacts only weakly with the surrounding matrix. The anion to cation ratio in the GaN:O host remains close to unity, and there is a close correlation between the N_2 fraction, the level of oxygen impurities, and the absence of short-range order in the GaN:O matrix.Comment: 5 pages, 3 figure

SLS Processing Studies of Nylon 11 Nanocomposites

Selective Laser Sintering (SLS) is widely used for rapid prototyping/manufacturing of nylon 11 and nylon 12 parts. This processing technique has not been explored for nylon nanocomposites. This study investigates the technicalities of processing nylon 11-clay and nylon-carbon nanofiber nanocomposites with SLS. Microstructural analyses of the SLS powders and parts were conducted under SEM. Results suggest that SLS processing is possible with the new nylon 11 nanocomposites. Yet the SLS parts built have inferior properties relative to those of injection molding, suggesting that more fine tuning for the processing is required.Mechanical Engineerin

Polyamide Nanocomposites for Selective Laser Sintering

Current polyamide 11 and 12 are lacking in fire retardancy and high strength/high heat resistance characteristics for a plethora of finished parts that are desired and required for performance driven applications. It is anticipated that nanomodification of polyamide 11 and 12 will result in enhanced polymer performance, i.e., fire retardancy, high strength and high heat resistance for polyamide 11 and 12. It is expected that these findings will expand the market opportunities for polyamide 11 and 12 resin manufacturers. The objective of this research is to develop improved polyamide 11 and 12 polymers with enhanced flame retardancy, thermal, and mechanical properties for selective laser sintering (SLS) rapid manufacturing (RM). A nanophase was introduced into the polyamide 11 and 12 via twin screw extrusion to provide improved material properties of the polymer blends. Arkema RILSAN® polyamide 11 molding polymer pellets and Degussa VESTAMID® L1670 polyamide 12 were examined with three types of nanoparticles: chemically modified montmorillonite (MMT) organoclays, surface modified nanosilica, and carbon nanofibers (CNFs) to create polyamide 11 and 12 nanocomposites. Wide angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM) were used to determine the degree of dispersion. Injection molded test specimens were fabricated for physical, thermal, mechanical properties, and flammability tests. Thermal stability of these polyamide 11 and 12 nanocomposites was examined by TGA. Mechanical properties such as tensile, flexural, and elongation at break were measured. Flammability properties were also obtained using the Cone Calorimeter at an external heat flux of 50 kW/m2. TEM micrographs, physical, mechanical, and flammability properties are included in the paper. Polyamide 11 and 12 nanocomposites properties are compared with polyamide 11 and 12 baseline polymers. Based on flammability and mechanical material performance, selective polymers including polyamide 11 nanocomposites and control polyamide 11 were cryogenically ground into fine powders and fabricated into SLS parts.Mechanical Engineerin

High-magnetic field phase diagram and failure of magnetic Gr\"uneisen scaling in LiFePO4_4

We report the magnetic phase diagram of single-crystalline LiFePO$_4$ in magnetic fields up to 58~T and present a detailed study of magneto-elastic coupling by means of high-resolution capacitance dilatometry. Large anomalies at \tn\ in the thermal expansion coefficient $\alpha$ imply pronounced magneto-elastic coupling. Quantitative analysis yields the magnetic Gr\"uneisen parameter $\gamma_{\rm mag}=6.7(5)\cdot 10^{-7}$~mol/J. The positive hydrostatic pressure dependence $dT_{\rm N}/dp = 1.46(11)$~K/GPa is dominated by uniaxial effects along the $a$-axis. Failure of Gr\"uneisen scaling below $\approx 40$~K, i.e., below the peak temperature in the magneto-electric coupling coefficient [\onlinecite{toft2015anomalous}], implies several competing degrees of freedom and indicates relevance of recently observed hybrid excitations~[\onlinecite{yiu2017hybrid}]. A broad and strongly magnetic-field-dependent anomaly in $\alpha$ in this temperature regime highlight the relevance of structure changes. Upon application of magnetic fields $B||b$-axis, a pronounced jump in the magnetisation implies spin-reorientation at $B_{\rm SF} = 32$~T as well as a precursing phase at 29~T and $T=1.5$~K. In a two-sublattice mean-field model, the saturation field $B_{\rm sat,b} = 64(2)$~T enables the determination of the effective antiferromagnetic exchange interaction $J_{\rm af} = 2.68(5)$~meV as well as the anisotropies $D_{\rm b} = -0.53(4)$~meV and $D_{\rm c} = 0.44(8)$~meV

A new approximation scheme in quantum mechanics

An approximation method which combines the perturbation theory with the variational calculation is constructed for quantum mechanical problems. Using the anharmonic oscillator and the He atom as examples, we show that the present method provides an efficient scheme in estimating both the ground and the excited states. We also discuss the limitations of the present method.Comment: 14pages, to be published in Eur. J. Phy