Sulfur-containing air pollutants as draw solution for fertilizer drawn forward osmosis desalination process for irrigation use

© 2017 Elsevier B.V. This study investigated suitability and performance of the sulfur-based seed solution (SBSS) as a draw solution (DS), a byproduct taken from the photoelectrochemical (PEC) process where the SBSS is used as an electrolyte for H2 production. This SBSS DS is composed of a mixture of ammonium sulfate ((NH4)2SO4) and ammonium sulfite ((NH4)2SO3), and it can be utilized as fertilizer for fertilizer drawn forward osmosis (FDFO) desalination of saline water. The FDFO process employed with thin-film composite (TFC) membrane and showed that the process performance (i.e. water flux and reverse salt flux) is better than that with cellulose triacetate (CTA) membrane. In addition, it produced high water flux of 19 LMH using SBSS as DS at equivalent concentration at 1 M and 5 g/L NaCl of feed solution (model saline water). Experimental results showed that the reverse salt flux of SBSS increased with the increase in pH of the DS and that lowering the concentration of ammonium sulfite in the SBSS led to the higher water flux of feed solution. The result also demonstrated that this SBSS is practically suitable for the FDFO process toward development of water-energy-food nexus technology using sulfur chemicals-containing air pollutant

Modification of nanofiber support layer for thin film composite forward osmosis membranes via layer-by-layer polyelectrolyte deposition

© 2018 by the authors. Licensee MDPI, Basel, Switzerland. Electrospun nanofiber-supported thin film composite membranes are among the most promising membranes for seawater desalination via forward osmosis. In this study, a high-performance electrospun polyvinylidenefluoride (PVDF) nanofiber-supported thin film composite (TFC) membrane was successfully fabricated after molecular layer-by-layer polyelectrolyte deposition. Negatively-charged electrospun polyacrylic acid (PAA) nanofibers were deposited on electrospun PVDF nanofibers to form a support layer consisted of PVDF and PAA nanofibers. This resulted to a more hydrophilic support compared to the plain PVDF nanofiber support. The PVDF-PAA nanofiber support then underwent a layer-by-layer deposition of polyethylenimine (PEI) and PAA to form a polyelectrolyte layer on the nanofiber surface prior to interfacial polymerization, which forms the selective polyamide layer of TFC membranes. The resultant PVDF-LbL TFC membrane exhibited enhanced hydrophilicity and porosity, without sacrificing mechanical strength. As a result, it showed high pure water permeability and low structural parameter values of 4.12 L m−2 h−1 bar−1 and 221 µm, respectively, significantly better compared to commercial FO membrane. Layer-by-layer deposition of polyelectrolyte is therefore a useful and practical modification method for fabrication of high performance nanofiber-supported TFC membrane

First report of Perkinsus honshuensis in the variegated carpet shell clam Ruditapes variegatus in Korea

The recent discovery of Perkinsus honshuensis, a new Perkinsus species infecting Manila clams Ruditapes philippinarum (Sowerby, 1852), in Japan, suggested that, based on proximity, P. honshuensis could also be in Korean waters, where to date, P. olseni was believed to be the only Perkinsus species present. Perkinsus sp. infections consistently occurred among Ruditapes variegatus clams on a pebble beach on Jeju Island, off the south coast of Korea. The typical \u27signet ring\u27 morphology of the parasite was observed in the connective tissue of the digestive gland, and infection intensity was comparatively low (3.3 x 10(3) +/- 1.2 x 10(4) to 1.3 x 10(4) +/- 6.1 x 10(4) cells g(-1) gill weight). Further DNA analyses of internal transcribed spacer (ITS-1, 5.8S and ITS-2) and non-transcribed spacer (NTS) regions of the parasite showed 98.9-99.8 and 98.5-99.5% similarity to those of P. honshuensis from Japan, respectively. Phylogenetic analyses using ITS and NTS sequences indicated that Perkinsus sp. from Jeju formed a highly supported clade with P. honshuensis. This is the first report of P. honshuensis infections in clams in Korean waters and the first report of R. variegatus as a host for that parasite

Functional water flow pathways and hydraulic regulation in the xylem network of arabidopsis

In vascular plants, the xylem network constitutes a complex microfluidic system. The relationship between vascular network architecture and functional hydraulic regulation during actual water flow remains unexplored. Here, we developed a method to visualize individual xylem vessels of the 3D xylem network of Arabidopsis thaliana, and to analyze the functional activities of these vessels using synchrotron X-ray computed tomography with hydrophilic gold nanoparticles as flow tracers. We show how the organization of the xylem network changes dynamically throughout the plant, and reveal how the elementary units of this transport system are organized to ensure both long-distance axial water transport and local lateral water transport. Xylem vessels form distinct clusters that operate as functional units, and the activity of these units, which determines water flow pathways, is modulated not only by varying the number and size of xylem vessels, but also by altering their interconnectivity and spatial arrangement. Based on these findings, we propose a regulatory model of water transport that ensures hydraulic efficiency and safety.X1111Ysciescopu

Adsorption characteristics of acetaldehyde on activated carbons prepared from corn-based biomass precursor

The ACs (R-1/2 and R-1/4) having two different textual and chemical properties are prepared from corn-based biomass precursor and evaluated together with a wood-based activated carbon (WAC) at room temperature using a gas chromatograph. The results obtained from the correlation studies indicate that the pore size distribution (below 8Å) and the relatively lower energetic heterogeneity of ACs on acetaldehyde adsorption are considerable factors rather than that of a specific surface area and surface chemistry. The adsorption equilibrium of ACs is well correlated with the Sips equation. The pseudo second-order equation was better in describing the ACs' adsorption kinetic of acetaldehyde. © Taylor & Francis Group, LLC

Preparation of titanium oxide, iron oxide, and aluminium oxide from sludge generated from Ti-salt, Fe-salt and Al-salt flocculation of wastewater

In this study, the settled floc (sludge) produced by aluminum sulfate (Al2(SO4)3), ferric chloride (FeCl3) and titanium tetrachloride (TiCl4) flocculation was recycled with a novel flocculation process, which has a significant potential to the lower cost of waste disposal, protect the environment and public health and yield economically useful by-products. Three coagulants removed 70% of organic matter in synthetic wastewater. The settled floc was incinerated in the range from 100 °C to 1000 °C. Alumina (Al2O3), hematite (Fe2O3), titanium oxide (TiO2) which are the most widely used metal oxides were produced from the wastewater sludge generated by the flocculation in wastewater with Al2(SO4)3, FeCl3 and TiCl4, respectively. TiO2 particles produced from the sludge consisted of the large amount of nano size particles. Hematite (Fe2O3) and grattarolaite (Fe3 (PO4)O3 or Fe3PO7) included the majority of micro size (40%) particles. Alumina (Al2O3) also consisted of micro size (40%). Due to TiO2 usefulness of the application, detailed characterisation of TiO2 after calcination at different temperatures were investigated in terms of X-ray diffraction, energy dispersive X-ray, surface area and photoactivity. © 2009 The Korean Society of Industrial and Engineering Chemistry

Coagulation performance and floc characteristics of polytitanium tetrachloride and titanium tetrachloride compared with ferric chloride for coal mining wastewater treatment

© 2015 Elsevier B.V. Abstract The production and discharge of large volumes of wastewater during coal mining activities are one of the major environmental issues in Australia. Therefore, it is crucial to develop and optimise effective treatment processes for the safe disposal of coal mining wastewater (CMWW). In this study, we investigated the performance of a recently developed polytitanium tetrachloride (PTC) coagulant and compared with the performance of titanium tetrachloride (TiCl4) and the commonly used ferric chloride (FeCl3) coagulant for the treatment of CMWW from one of the coal mining sites in Australia. The use of Ti-based coagulants is particularly attractive for the CMWW treatment due to the advantage of being able to recycle the sludge to produce functional titanium dioxide (TiO2) photocatalyst; unlike the flocs formed using conventional coagulants, which need to be disposed in landfill sites. The results showed that both PTC and TiCl4 performed better than FeCl3 in terms of turbidity, UV254 and inorganic compounds (e.g. aluminium, copper or zinc) removal, however, PTC performed poorly in terms of dissolved organic carbon removal (i.e. less than 10%). While charge neutralisation and bridging adsorption were the main coagulation mechanisms identified for TiCl4 treatment; sweep coagulation and bridging adsorption seemed to play a more important role for both PTC and FeCl3 treatments. The flocs formed by PTC coagulation achieved the largest floc size of around 900 μm with the highest floc growth rate. Both Ti-based coagulants (i.e., PTC and TiCl4) showed higher strength factor than FeCl3, while TiCl4 coagulant yielded the flocs with the highest recovery factor. This study indicates that Ti-based coagulants are effective and promising coagulants for the treatment of CMWW

Chemically Cross-Linked Graphene Oxide as a Selective Layer on Electrospun Polyvinyl Alcohol Nanofiber Membrane for Nanofiltration Application.

Graphene oxide (GO) nanosheets were utilized as a selective layer on a highly porous polyvinyl alcohol (PVA) nanofiber support via a pressure-assisted self-assembly technique to synthesize composite nanofiltration membranes. The GO layer was rendered stable by cross-linking the nanosheets (GO-to-GO) and by linking them onto the support surface (GO-to-PVA) using glutaraldehyde (GA). The amounts of GO and GA deposited on the PVA substrate were varied to determine the optimum nanofiltration membrane both in terms of water flux and salt rejection performances. The successful GA cross-linking of GO interlayers and GO-PVA via acetalization was confirmed by FTIR and XPS analyses, which corroborated with other characterization results from contact angle and zeta potential measurements. Morphologies of the most effective membrane (CGOPVA-50) featured a defect-free GA cross-linked GO layer with a thickness of ~67 nm. The best solute rejections of the CGOPVA-50 membrane were 91.01% for Na2SO4 (20 mM), 98.12% for Eosin Y (10 mg/L), 76.92% for Methylene blue (10 mg/L), and 49.62% for NaCl (20 mM). These findings may provide one of the promising approaches in synthesizing mechanically stable GO-based thin-film composite membranes that are effective for solute separation via nanofiltration

Graphene oxide incorporated polysulfone substrate for the fabrication of flat-sheet thin-film composite forward osmosis membranes

© 2015 Elsevier B.V. The preparation and performances of the newly synthesized thin film composite (TFC) forward osmosis (FO) membranes with graphene oxide (GO)-modified support layer are presented in this study. GO nanosheets were incorporated in the polysulfone (PSf) to obtain PSf/GO composite membrane support layer. Polyamide (PA) active layer was subsequently formed on the PSf/GO by interfacial polymerization to obtain the TFC-FO membranes. Results reveal that at an optimal amount of GO addition (0.25wt%), a PSf/GO composite support layer with favorable structural property measured in terms of thickness, porosity and pore size can be achieved. The optimum incorporation of GO in the PSF support layer not only significantly improved water permeability but also allowed effective PA layer formation, in comparison to that of pure PSf support layer which had much lower water permeability. Thus, a TFC-FO membrane with high water flux (19.77Lm-2h-1 against 6.08Lm-2h-1 for pure PSf) and reverse flux selectivity (5.75Lg-1 against 3.36Lg-1 for pure PSf) was obtained under the active layer facing the feed solution or AL-FS membrane orientation. Besides the improved structural properties (reduced structural parameter, S) of the support layer, enhanced support hydrophilicity also contributed to the improved water permeability of the membrane. Beyond a certain point of GO addition (≥0.5wt%), the poor dispersion of GO in dope solution and significant structure change resulted in lower water permeation and weaker mechanical properties in support as well as FO flux/selectivity of consequent TFC membrane. Overall, this study suggests that GO modification of membrane supports could be a promising technique to improve the performances of TFC-FO membranes

Multi-dimensional TOF-SIMS analysis for effective profiling of disease-related ions from the tissue surface

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) emerges as a promising tool to identify the ions (small molecules) indicative of disease states from the surface of patient tissues. In TOF-SIMS analysis, an enhanced ionization of surface molecules is critical to increase the number of detected ions. Several methods have been developed to enhance ionization capability. However, how these methods improve identification of disease-related ions has not been systematically explored. Here, we present a multi-dimensional SIMS (MD-SIMS) that combines conventional TOF-SIMS and metal-assisted SIMS (MetA-SIMS). Using this approach, we analyzed cancer and adjacent normal tissues first by TOF-SIMS and subsequently by MetA-SIMS. In total, TOF- and MetA-SIMS detected 632 and 959 ions, respectively. Among them, 426 were commonly detected by both methods, while 206 and 533 were detected uniquely by TOF- and MetA-SIMS, respectively. Of the 426 commonly detected ions, 250 increased in their intensities by MetA-SIMS, whereas 176 decreased. The integrated analysis of the ions detected by the two methods resulted in an increased number of discriminatory ions leading to an enhanced separation between cancer and normal tissues. Therefore, the results show that MD-SIMS can be a useful approach to provide a comprehensive list of discriminatory ions indicative of disease states.1178Ysciescopu