21,968 research outputs found
Confocal microscopic analysis of optical crosstalk in GaN micro-pixel light-emitting diodes
Ā© 2015 AIP Publishing LLC. The optical crosstalk phenomenon in GaN micro-pixel light-emitting diodes (LED) has been investigated by confocal microscopy. Depth-resolved confocal emission images indicate light channeling along the GaN and sapphire layers as the source of crosstalk. Thin-film micro-pixel devices are proposed, whereby the light-trapping sapphire layers are removed by laser lift-off. Optical crosstalk is significantly reduced but not eliminated due to the remaining GaN layer. Another design involving micro-pixels which are completely isolated is further proposed; such devices exhibited low-noise and enhanced optical performances, which are important attributes for high-density micro-pixel LED applications including micro-displays and multi-channel optical communications.published_or_final_versio
Comparison of chemical profiles and effectiveness between Erxian decoction and mixtures of decoctions of its individual herbs : a novel approach for identification of the standard chemicals
Acknowledgements This study was partially supported by grants from the Seed Funding Programme for Basic Research (Project Number 201211159146 and 201411159213), the University of Hong Kong. We thank Mr Keith Wong and Ms Cindy Lee for their technical assistances.Peer reviewedPublisher PD
Compact printed multiband antenna with independent setting suitable for fixed and reconfigurable wireless communication systems
This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.This paper presents the design of a low-profile compact printed antenna for fixed frequency and reconfigurable frequency bands. The antenna consists of a main patch, four sub-patches, and a ground plane to generate five frequency bands, at 0.92, 1.73, 1.98, 2.4, and 2.9 GHz, for different wireless systems. For the fixed-frequency design, the five individual frequency bands can be adjusted and set independently over the wide ranges of 18.78%, 22.75%, 4.51%, 11%, and 8.21%, respectively, using just one parameter of the antenna. By putting a varactor (diode) at each of the sub-patch inputs, four of the frequency bands can be controlled independently over wide ranges and the antenna has a reconfigurable design. The tunability ranges for the four bands of 0.92, 1.73, 1.98, and 2.9 GHz are 23.5%, 10.30%, 13.5%, and 3%, respectively. The fixed and reconfigurable designs are studied using computer simulation. For verification of simulation results, the two designs are fabricated and the prototypes are measured. The results show a good agreement between simulated and measured results
Slip energy barriers in aluminum and implications for ductile versus brittle behavior
We conisder the brittle versus ductile behavior of aluminum in the framework
of the Peierls-model analysis of dislocation emission from a crack tip. To this
end, we perform first-principles quantum mechanical calculations for the
unstable stacking energy of aluminum along the Shockley partial
slip route. Our calculations are based on density functional theory and the
local density approximation and include full atomic and volume relaxation. We
find that in aluminum J/m. Within the Peierls-model
analysis, this value would predict a brittle solid which poses an interesting
problem since aluminum is typically considered ductile. The resolution may be
given by one of three possibilites: (a) Aluminum is indeed brittle at zero
temperature, and becomes ductile at a finite temperature due to motion of
pre-existing dislocations which relax the stress concentration at the crack
tip. (b) Dislocation emission at the crack tip is itself a thermally activated
process. (c) Aluminum is actually ductile at all temperatures and the
theoretical model employed needs to be significantly improved in order to
resolve the apparent contradiction.Comment: 4 figures (not included; send requests to [email protected]
The Accuracy of Ultrasound in the Pre-Operative Localisation of Parathyroid Lesions in Primary Hyperparathyroidism: A Review of the Literature
Laser surface colouring of titanium for contemporary jewellery
This paper describes work which emerged through a need to understand more about the potential of laser surface engineering for use in the creative industries. The method of creation of contemporary jewellery pieces and the resultant 'Ocular' jewellery series are described from the creative point of view. The work demonstrates how laser controlled oxide growth on Tiā6Alā4V alloy under ambient conditions can be used as an artistic tool by producing precisely defined colours. Use of the method to produce regular areas of even colour and to reproduce freehand drawings on a titanium alloy surface is described. Analysis highlights interference as the main colouring mechanism and suggests a graded surface layer, progressing from an outer layer of TiO2 to lower layers rich in TiO and Ti2O. The model of research by practice presented in this paper offers a contribution to the current debate on partnerships between art and science and engineering
- ā¦