Tracking the evolution of hot tears in aluminium alloys using high-speed X-ray imaging

Hot tears are detrimental defects forming during the final stage of solidification when the remaining liquid loses the capacity to compensate for liquid to solid volume shrinkage. Although a mature semi-quantitative description of hot tearing has been developed, little is known about the dynamic evolution of hot tears as experimental studies have been conducted mostly post-solidification or in semi-static in-situ conditions. Here, we present a methodology to investigate the evolution of hot tears with high spatial and temporal resolution using synchrotron-based X-ray radiography. We develop a novel hot tear detection and tracking algorithm for quantification of hot tear density, area fraction and merging from the analysis of radiographic sequences of the solidification of thin metal samples. The methodology is demonstrated for an Al-5wt%Cu alloy and examples of the results and new insights that can be achieved are described

The mechanism of Fe-rich intermetallic compound formation and growth on inoculants revealed by electron backscattered diffraction and X-ray imaging

Fe-rich intermetallics affect critically the mechanical properties and recyclability of aluminium alloys. Increasing effort has been spent on the inoculation of these intermetallics, hoping to promote a finer distribution. Recently Al-5Ti-1B (wt.%), originally developed to refine -Al, has been shown to refine Al13Fe4, an intermetallic phase present in a variety of Al alloys. However, mechanisms of the formation and growth of the intermetallics on the inoculants are unclear. In this paper, Ti is added to Fe-containing Al alloys to produce a large number of potent Al3Ti particles, the active inoculant in Al-5Ti-1B. We use a combination of electron backscattered diffraction, in situ synchrotron X-ray radiography and post-solidification X-ray computed tomography to investigate the formation and growth of primary Al13Fe4 on Al3Ti inoculants, first in a model Al-Fe alloy, with key insights then confirmed in a high Fe-containing, recycled 6xxx alloy. Crystallographic orientation relationships between Al13Fe4 and Al3Ti are analysed comprehensively, and the formation and growth dynamics of Al13Fe4 on Al3Ti is also unveiled. A strong link is revealed between the formation of Al13Fe4 on Al3Ti and a twinning-related pseudo-symmetry of Al13Fe4. Finally, a potential strategy to refine both intermetallics and -Al in recycled alloys with elevated Fe concentration is proposed

Mechanism of efficient double-strand break repair by a long non-coding RNA.

Mechanistic studies in DNA repair have focused on roles of multi-protein DNA complexes, so how long non-coding RNAs (lncRNAs) regulate DNA repair is less well understood. Yet, lncRNA LINP1 is over-expressed in multiple cancers and confers resistance to ionizing radiation and chemotherapeutic drugs. Here, we unveil structural and mechanistic insights into LINP1's ability to facilitate non-homologous end joining (NHEJ). We characterized LINP1 structure and flexibility and analyzed interactions with the NHEJ factor Ku70/Ku80 (Ku) and Ku complexes that direct NHEJ. LINP1 self-assembles into phase-separated condensates via RNA-RNA interactions that reorganize to form filamentous Ku-containing aggregates. Structured motifs in LINP1 bind Ku, promoting Ku multimerization and stabilization of the initial synaptic event for NHEJ. Significantly, LINP1 acts as an effective proxy for PAXX. Collective results reveal how lncRNA effectively replaces a DNA repair protein for efficient NHEJ with implications for development of resistance to cancer therapy

Structural variation and introgression from wild populations in East Asian cattle genomes confer adaptation to local environment

BACKGROUND: Structural variations (SVs) in individual genomes are major determinants of complex traits, including adaptability to environmental variables. The Mongolian and Hainan cattle breeds in East Asia are of taurine and indicine origins that have evolved to adapt to cold and hot environments, respectively. However, few studies have investigated SVs in East Asian cattle genomes and their roles in environmental adaptation, and little is known about adaptively introgressed SVs in East Asian cattle. RESULTS: In this study, we examine the roles of SVs in the climate adaptation of these two cattle lineages by generating highly contiguous chromosome-scale genome assemblies. Comparison of the two assemblies along with 18 Mongolian and Hainan cattle genomes obtained by long-read sequencing data provides a catalog of 123,898 nonredundant SVs. Several SVs detected from long reads are in exons of genes associated with epidermal differentiation, skin barrier, and bovine tuberculosis resistance. Functional investigations show that a 108-bp exonic insertion in SPN may affect the uptake of Mycobacterium tuberculosis by macrophages, which might contribute to the low susceptibility of Hainan cattle to bovine tuberculosis. Genotyping of 373 whole genomes from 39 breeds identifies 2610 SVs that are differentiated along a "north-south" gradient in China and overlap with 862 related genes that are enriched in pathways related to environmental adaptation. We identify 1457 Chinese indicine-stratified SVs that possibly originate from banteng and are frequent in Chinese indicine cattle. CONCLUSIONS: Our findings highlight the unique contribution of SVs in East Asian cattle to environmental adaptation and disease resistance

Molecular Characterization of Organosulfates in Organic Aerosols from Shanghai and Los Angeles Urban Areas by Nanospray-Desorption Electrospray Ionization High-Resolution Mass Spectrometry

Fine aerosol particles in the urban areas of Shanghai and Los Angeles were collected on days that were characterized by their stagnant air and high organic aerosol concentrations. They were analyzed by nanospray-desorption electrospray ionization mass spectrometry with high mass resolution (m/Δm = 100,000). Solvent mixtures of acetonitrile and water and acetonitrile and toluene were used to extract and ionize polar and nonpolar compounds, respectively. A diverse mixture of oxygenated hydrocarbons, organosulfates, organonitrates, and organics with reduced nitrogen were detected in the Los Angeles sample. A majority of the organics in the Shanghai sample were detected as organosulfates. The dominant organosulfates that were detected at two locations have distinctly different molecular characteristics. Specifically, the organosulfates in the Los Angeles sample were dominated by biogenic products, while the organosulfates of a yet unknown origin found in the Shanghai sample had distinctive characteristics of long aliphatic carbon chains and low degrees of oxidation and unsaturation. The use of the acetonitrile and toluene solvent facilitated the observation of this type of organosulfates, which suggests that they could have been missed in previous studies that relied on sample extraction using common polar solvents. The high molecular weight and low degree of unsaturation and oxidization of the uncommon organosulfates suggest that they may act as surfactants and plausibly affect the surface tension and hygroscopicity of atmospheric particles. We propose that direct esterification of carbonyl or hydroxyl compounds by sulfates or sulfuric acid in the liquid phase could be the formation pathway of these special organosulfates. Long-chain alkanes from vehicle emissions might be their precursors

Global genetic diversity, introgression, and evolutionary adaptation of indicine cattle revealed by whole genome sequencing

Indicine cattle, also referred to as zebu (Bos taurus indicus), play a central role in pastoral communities across a wide range of agro-ecosystems, from extremely hot semiarid regions to hot humid tropical regions. However, their adaptive genetic changes following their dispersal into East Asia from the Indian subcontinent have remained poorly documented. Here, we characterize their global genetic diversity using high-quality whole-genome sequencing data from 354 indicine cattle of 57 breeds/populations, including major indicine phylogeographic groups worldwide. We reveal their probable migration into East Asia was along a coastal route rather than inland routes and we detected introgression from other bovine species. Genomic regions carrying morphology-, immune-, and heat-tolerance-related genes underwent divergent selection according to Asian agro-ecologies. We identify distinct sets of loci that contain promising candidate variants for adaptation to hot semi-arid and hot humid tropical ecosystems. Our results indicate that the rapid and successful adaptation of East Asian indicine cattle to hot humid environments was promoted by localized introgression from banteng and/or gaur. Our findings provide insights into the history and environmental adaptation of indicine cattle

The mechanism of Fe-rich intermetallic compound formation and growth on inoculants revealed by electron backscattered diraction and X-ray imaging

Fe-rich intermetallics affect critically the mechanical properties and recyclability of aluminium alloys. Increasing effort has been spent on the inoculation of these intermetallics, hoping to promote a finer distribution. Recently Al-5Ti-1B (wt.%), originally developed to refine α-Al, has been shown to refine Al13Fe4, an intermetallic phase present in a variety of Al alloys. However, mechanisms of the formation and growth of the intermetallics on the inoculants are unclear. In this paper, Ti is added to Fe-containing Al alloys to produce a large number of potent Al3Ti particles, the active inoculant in Al-5Ti-1B. We use a combination of electron backscattered diffraction, in situ synchrotron X-ray radiography and post-solidification X-ray computed tomography to investigate the formation and growth of primary Al13Fe4 on Al3Ti inoculants, first in a model Al-Fe alloy, with key insights then confirmed in a high Fe-containing, recycled 6xxx alloy. Crystallographic orientation relationships between Al13Fe4 and Al3Ti are analysed comprehensively, and the formation and growth dynamics of Al13Fe4 on Al3Ti is also unveiled. A strong link is revealed between the formation of Al13Fe4 on Al3Ti and a twinning-related pseudo-symmetry of Al13Fe4. Finally, a potential strategy to refine both intermetallics and α-Al in recycled alloys with elevated Fe concentration is proposed

Tracking the evolution of hot tears in aluminium alloys using high-speed X-ray imaging

Hot tears are detrimental defects forming during the final stage of solidification when the remaining liquid loses the capacity to compensate for liquid to solid volume shrinkage. Although a mature semi-quantitative description of hot tearing has been developed, little is known about the dynamic evolution of hot tears as experimental studies have been conducted mostly post-solidification or in semi-static in-situ conditions. Here, we present a methodology to investigate the evolution of hot tears with high spatial and temporal resolution using synchrotron-based X-ray radiography. We develop a novel hot tear detection and tracking algorithm for quantification of hot tear density, area fraction and merging from the analysis of radiographic sequences of the solidification of thin metal samples. The methodology is demonstrated for an Al-5wt%Cu alloy and examples of the results and new insights that can be achieved are described

Investigating Metal Solidification with X-ray Imaging

In the last two decades, X-ray imaging techniques have been used increasingly to study metal solidification in real-time as, thanks to advances in X-ray sources (synchrotron and laboratory-based) and detector technology, images can now be obtained with spatio-temporal resolutions sufficient to record key phenomena and extract quantitative information, primarily relating to crystal growth. This paper presents an overview of the research conducted at the University of Oxford over the last 6 years as a partner in the UK’s Future Liquid Metal Engineering (LiME) Manufacturing Hub. The focus is on in situ X-ray radiography to investigate the solidification of Al alloys, including the formation of primary α-Al crystals, and the formation and growth of secondary intermetallic phases. Technologically, the thrust is to understand how to control as-cast phases, structures and element distributions, particularly elements associated with recycling, as a means to facilitate greater recirculation of aluminium alloys. We first present studies on refinement of primary α-Al, including extrinsic grain refinement using inoculation and intrinsic refinement based on dendrite fragmentation. Second, we describe studies on intermetallic phase formation and growth, because intermetallic fraction, morphology and distribution are frequently a limiting factor of alloy mechanical properties and recyclability. Then we present some of the latest progress in studying liquid flow during solidification and associated hot tear formation. Finally, future research directions are described

The mechanism of Fe-rich intermetallic compound formation and growth on inoculants revealed by electron backscattered diffraction and X-ray imaging

Fe-rich intermetallics affect critically the mechanical properties and recyclability of aluminium alloys. Increasing effort has been spent on the inoculation of these intermetallics, hoping to promote a finer distribution. Recently Al-5Ti-1B (wt.%), originally developed to refine -Al, has been shown to refine Al$_{13}$Fe$_4$, an intermetallic phase present in a variety of Al alloys. However, mechanisms of the formation and growth of the intermetallics on the inoculants are unclear. In this paper, Ti is added to Fe-containing Al alloys to produce a large number of potent Al$_3$Ti particles, the active inoculant in Al-5Ti-1B. We use a combination of electron backscattered diffraction, in situ synchrotron X-ray radiography and post-solidification X-ray computed tomography to investigate the formation and growth of primary Al$_{13}$Fe$_4$ on Al$_3$Ti inoculants, first in a model Al-Fe alloy, with key insights then confirmed in a high Fe-containing, recycled 6xxx alloy. Crystallographic orientation relationships between Al$_{13}$Fe$_4$ and Al$_3$Ti are analysed comprehensively, and the formation and growth dynamics of Al$_{13}$Fe$_4$ on Al$_3$Ti is also unveiled. A strong link is revealed between the formation of Al$_{13}$Fe$_4$ on Al$_3$Ti and a twinning-related pseudo-symmetry of Al$_{13}$Fe$_4$. Finally, a potential strategy to refine both intermetallics and -Al in recycled alloys with elevated Fe concentration is proposed