110 research outputs found
Adaptive Wing/Aerofoil Design Optimisation Using MOEA Coupled to Uncertainty Design Method
The use of adaptive wing/aerofoil designs is being considered as promising techniques in aeronautic/aerospace since they can reduce aircraft emissions, improve aerodynamic performance of manned or unmanned aircraft. The paper investigates the robust design and optimisation for one type of adaptive techniques; Active Flow Control (AFC) bump at transonic flow conditions on a Natural Laminar Flow (NLF) aerofoil designed to increase aerodynamic efficiency (especially high lift to drag ratio). The concept of using Shock Control Bump (SCB) is to control supersonic flow on the suction/pressure side of NLF aerofoil: RAE 5243 that leads to delaying shock occurrence or weakening its strength. Such AFC technique reduces total drag at transonic speeds due to reduction of wave drag. The location of Boundary Layer Transition (BLT) can influence the position the supersonic shock occurrence. The BLT position is an uncertainty in aerodynamic design due to the many factors, such as surface contamination or surface erosion. The paper studies the SCB shape design optimisation using robust Evolutionary Algorithms (EAs) with uncertainty in BLT positions. The optimisation method is based on a canonical evolution strategy and incorporates the concepts of hierarchical topology, parallel computing and asynchronous evaluation. Two test cases are conducted; the first test assumes the BLT is at 45% of chord from the leading edge and the second test considers robust design optimisation for SCB at the variability of BLT positions and lift coefficient. Numerical result shows that the optimisation method coupled to uncertainty design techniques produces Pareto optimal SCB shapes which have low sensitivity and high aerodynamic performance while having significant total drag reduction
Suppressed magnetization in LaCaMnO/YBaCuO superlattices
We studied the magnetic properties of LaCaMnO /
YBaCuO superlattices. Magnetometry showed that with
increasing YBaCuO layer thickness the saturation
magnetization per LaCaMnO layer decreases. From polarized
neutron reflectometry we determined that this magnetization reduction is due to
an inhomogenous magnetization depth profile arising from the suppression of
magnetization near the LaCaMnO /
YBaCuO interface. Electron energy loss spectroscopy
indicates an increased 3d band occupation of the Mn atoms in the
LaCaMnO layers at the interface. Thus, the suppression of
ferromagnetic order at the LaCaMnO /
YBaCuO interface is most likely due to charge transfer
between the two materials.Comment: 4 pages, 4 figures, submitted to Phys. Rev.
Emergent Spin-Filter at the interface between Ferromagnetic and Insulating Layered Oxides
We report a strong effect of interface-induced magnetization on the transport
properties of magnetic tunnel junctions consisting of ferromagnetic manganite
LaCaMnO and insulating cuprate PrBaCuO.
Contrary to the typically observed steady increase of the tunnel
magnetoresistance with decreasing temperature, this system exhibits a sudden
anomalous decrease at low temperatures. Interestingly, this anomalous behavior
can be attributed to the competition between the positive spin polarization of
the manganite contacts and the negative spin-filter effect from the
interface-induced Cu magnetization.Comment: 5 pages, 4 figures, with supplemental materials (2 figures). Physical
Review Letters, in pres
High On/Off ratio memristive switching of manganite/cuprate bilayer by interfacial magnetoelectricity
Memristive switching serves as the basis for a new generation of electronic devices. Memristors are two-terminal devices in which the current is turned on and off by redistributing point defects, e.g., vacancies, which is difficult to control. Memristors based on alternative mechanisms have been explored, but achieving both the high On/Off ratio and the low switching energy desirable for use in electronics remains a challenge. Here we report memristive switching in a La_(0.7)Ca_(0.3)MnO_(3)/PrBa_(2)Cu_(3)O_(7) bilayer with an On/Off ratio greater than 103 and demonstrate that the phenomenon originates from a new type of interfacial magnetoelectricity. Using results from firstprinciples calculations, we show that an external electric-field induces subtle displacements of the interfacial Mn ions, which switches on/off an interfacial magnetic “dead” layer, resulting in memristive behavior for spin-polarized electron transport across the bilayer. The interfacial nature of the switching entails low energy cost about of a tenth of atto Joule for write/erase a “bit”. Our results indicate new opportunities for manganite/cuprate systems and other transition-metal-oxide junctions in memristive applications
Long-range transfer of electron-phonon coupling in oxide superlattices
The electron-phonon interaction is of central importance for the electrical
and thermal properties of solids, and its influence on superconductivity,
colossal magnetoresistance, and other many-body phenomena in
correlated-electron materials is currently the subject of intense research.
However, the non-local nature of the interactions between valence electrons and
lattice ions, often compounded by a plethora of vibrational modes, present
formidable challenges for attempts to experimentally control and theoretically
describe the physical properties of complex materials. Here we report a Raman
scattering study of the lattice dynamics in superlattices of the
high-temperature superconductor and the
colossal-magnetoresistance compound that suggests
a new approach to this problem. We find that a rotational mode of the MnO
octahedra in experiences pronounced
superconductivity-induced lineshape anomalies, which scale linearly with the
thickness of the layers over a remarkably long range of
several tens of nanometers. The transfer of the electron-phonon coupling
between superlattice layers can be understood as a consequence of long-range
Coulomb forces in conjunction with an orbital reconstruction at the interface.
The superlattice geometry thus provides new opportunities for controlled
modification of the electron-phonon interaction in complex materials.Comment: 13 pages, 4 figures. Revised version to be published in Nature
Material
Origin of the inverse spin-switch behavior in manganite/cuprate/manganite trilayers
We studied ferromagnet/superconductor/ferromagnet trilayers based on La_(0.7)Ca_(0.3)MnO_(3) manganite and YBa_(2)Cu_(3)O_(7−δ) (YBCO) high-T_(c) cuprate with magnetoresistance and magnetization measurements. We find an inverse superconducting spin-switch behavior, where superconductivity is favored for parallel alignment of the magnetization in the ferromagnetic layers. We argue that this inverse superconducting spin switch originates from the transmission of spin-polarized carriers into the superconductor. In this picture, the thickness dependence of the magnetoresistance yields the spin-diffusion length in YBCO as 13 nm. A comparison of bilayers and trilayers allows ruling out the effect of the stray fields of the domain structure of the ferromagnet as the source of the inverse superconducting spin switch
Effects of epitaxial strain on the growth mechanism of YBa2Cu3O7-x thin films in [YBa2Cu3O7-x / PrBa2Cu3O7-x] superlattices
We report on the growth mechanism of YBa2Cu3O7-x (YBCO). Our study is based
on the analysis of ultrathin, YBa2Cu3O7-x layers in c-axis oriented YBa2Cu3O7-x
/ PrBa2Cu3O7-x superlattices. We have found that the release of epitaxial
strain in very thin YBCO layers triggers a change in the dimensionality of the
growth mode. Ultrathin, epitaxially strained, YBCO layers with thickness below
3 unit cells grow in a block by block two dimensional mode coherent over large
lateral distances. Meanwhile, when thickness increases, and the strain relaxes,
layer growth turns into three dimensional, resulting in rougher layers and
interfaces.Comment: 10 pages + 9 figures, accepted in Phys. Rev.
- …