Drilling system design project 1967: final report of frame design committee

This report outlines the recommendations of the Frame Design Committee for the final design of the machine, each major part of the structure being considered individually in the following sections : 1. Worktables 2. Guide and Slideways 3. Drill Head Support Structure 4. Swarf Disposal and Coolant Supply 5. General Constructio

Improved zinc oxide thermal control coatings

Ferricyanide/ferrocyanide couple prevents zinc oxide pigment degradation in thermal control coatings. Chemical couple retards physical optical property changes

Non-Simply-Connected Gauge Groups and Rational Points on Elliptic Curves

We consider the F-theory description of non-simply-connected gauge groups appearing in the E8 x E8 heterotic string. The analysis is closely tied to the arithmetic of torsion points on an elliptic curve. The general form of the corresponding elliptic fibration is given for all finite subgroups of E8 which are applicable in this context. We also study the closely-related question of point-like instantons on a K3 surface whose holonomy is a finite group. As an example we consider the case of the heterotic string on a K3 surface having the E8 gauge symmetry broken to (E6 x SU(3))/Z3 or SU(9)/Z3 by point-like instantons with Z3 holonomy.Comment: 15 pages, 2 embedded figures, some spurious U(1)'s remove

Effect of environment on thermal control coatings Final report

Thermal control coating degradation under vacuum and ultraviolet radiation by chemical change of photoproduced holes and electron

Development of small bore, high speed tapered roller bearing

The performance of four rolling bearing configurations for use on the input pinion shaft of a proposed commercial helicopter transmission was evaluated. The performance characteristics of a high speed tapered roller bearing operating under conditions comparable to those existing at this input pinion shaft were defined. The tapered roller bearing shaft support configuration was developed for the gearbox using commercially available bearing designings. The configuration was optimized and interactive thermomechanically system analyzed. Automotive pinion quality tapered roller bearings were found to be reliable under load and speed conditions in excess of those anticipated in the helicopter transmission. However, it is indicated that the elastohydrodynamic lubricant films are inadequate

Effect of environment on thermal control coatings

Ferrocyanide and ferricyanide additives for prevention of optical degradation of coatings by ultraviolet radiation and vacuu

On the unification of geodetic leveling datums using satellite altimetry

Techniques are described for determining the height of Mean Sea Level (MSL) at coastal sites from satellite altimetry. Such information is of value in the adjustment of continental leveling networks. Numerical results are obtained from the 1977 GEOS-3 altimetry data bank at Goddard Space Flight Center using the Bermuda calibration of the altimeter. Estimates are made of the heights of MSL at the leveling datums for Australia and a hypothetical Galveston datum for central North America. The results obtained are in reasonable agreement with oceanographic estimates obtained by extrapolation. It is concluded that all gravity data in the Australian bank AUSGAD 76 and in the Rapp data file for central North America refer to the GEOS-3 altimeter geoid for 1976.0 with uncertainties which do not exceed + or - 0.1 mGal