Theoretical framework of the causes of construction time and cost overruns

Any construction practitioner fundamental goal is to complete the projects within estimated duration and budgets, and expected quality targets. However, time and cost overruns are regular and universal phenomenon in construction projects and the construction projects in Malaysia has no exemption from the problems of time overrun and cost overrun. In order to accomplish the successful completion of construction projects on specified time and within planned cost, there are various factors that should be given serious attention so that issues such as time and cost overrun can be addressed. This paper aims to construct a framework for the causes of time overrun and cost overrun in construction projects of Malaysia. Based on the relevant literature review, causative factors of time overrun and cost overrun in Malaysian construction projects are summarized and the theoretical frameworks of the causes of construction time overrun and cost overrun is constructed. The developed frameworks for construction time and cost overruns based on the existing literature will assist the construction practitioners to plan the efficient approaches for achieving successful completion of the projects

Causative factors of cost overrun in highway projects of Sindh province of Pakistan

Cost overrun is an increase of cost of project from approved budget which was signed by parties at the time of tender. Cost overrun in construction of highway projects is a common problem worldwide and construction industry of Pakistan is also facing this crucial problem of cost overrun in highway projects of Pakistan. The main objective of this research is to identify the causative factors of cost overrun in highway projects of Sindh province of Pakistan. A well designed questionnaire was developed based on 64 common factors of cost overrun from literature review. Developed questionnaire was distributed among selected 30 experts from owner/client, designer/consultant and contractor who have experience more than 20 years’ experience in highway projects. The collected data was statistical analyzed. After analysis results showed that delay process in payment by client, inadequate planning , client interference, poor contract management, delay of decision making, change of scope of project and financial problems faced by client were most causative factors of cost overrun in highway projects. This research will provide alertness to stakeholders of highway projects of Sindh province to avoid cost overrun in projects

A secure data authentication in wireless body area network for health monitoring using electrocardiogram-based key agreement

Wireless Body Area Network (WBAN) comprises of a set of biomedical sensors, which are implanted into or placed around a human body to serve a variety of network applications constantly. One of the applications, the ubiquitous health monitoring, has improved the ability of healthcare providers to deliver appropriate treatments to the patients either in hospitals or at homes. As the need of this application increases, several security issues also arise due to the nature of open wireless medium. Moreover, implementing an effective security mechanism uses a significant part of the available energy in a WBAN, whereby the sensors have limited resource constraints in terms of power consumption and memory space. Thus, this paper presents a new authentication protocol model that utilizes Electrocardiogram (ECG) signal as biometric as well as cryptographic key to ensure that the transmitted data are originated from the required WBAN. Due to the uniqueness and the permanence property of ECG signal, the proposed model is developed to achieve optimal security performance and required lightweight manners of to the resource-limited biomedical sensors. The simulation system is implemented based on the process of an improved fuzzy vault scheme with a new error correction algorithm, which results in reducing computational complexity, communication load and storage overhead when compared to several previous work

A Comparative Study of Construction Waste Generation Rate Based on Different Construction Methods on Construction Project in Malaysia

High construction waste (CW) generation in Malaysia has serious impacts although there are very little available data regarding the relevant issue in Malaysia. This lack of data results in improper CW management and CW disposal without proper control measures. To control the implications of CW, it is very important to understand their quantity which is currently unknown. Past researches in Malaysia, found that CW generation was affected by construction methods (CMs) practiced on site. The aim of this study is to compare the CW generation rate between different CMs for on-going construction projects in Malaysia. Common CMs practiced in Malaysia are conventional construction method (CCM), mixed construction method (MCM) and industrialized building system (IBS). To obtain CW generation data, site visit (SV) method, which consists of direct measurement (DM) and indirect measurement (IM) is applied to this study. CCM was recorded to have the highest amount of waste (197.657 tons). IBS method records 77.188 tons and MCM 53.191 tons. Regarding the average waste generation rate (AWGR), IBS recorded a value of 0.018 tons per square meter, while MCM recorded 0.030 tons per square meter and CCM recorded the highest amount of 0.046 tons per square meter

A case study of green building in Malaysia: cost saving analysis

The building sector consumes about forty percent of world energy, making energy efficiency in existing buildings an important issue. This study has been undertaken to investigate energy consumption of a building that has been redesigned to incorporate energy efficient features. It was found that the introduction of energy efficient features has helped to achieve savings up to 46% of the total spent on energy particularly based on electricity bills

Wind characteristics and outdoor thermal comfort assessment in east Malaysia

Rapid urbanisation and industrialisation have had an adverse and deep impact on the environment contributing to global warming and climate change. These thermal environmental problems can be even more challenging to people living in regions with warm and humid climatic conditions throughout the year, such as Malaysia. This paper analyses wind characteristics and outdoor thermal comfort index at the hottest temperatures based on data recorded hourly between 2012 and 2014 for two cities in East Malaysia, namely Kuching (Sarawak) and Kota Kinabalu (Sabah). Wind characteristics were analysed using only wind velocity and direction, while the level of outdoor thermal comfort was measured using Universal Thermal Climate Index (UTCI). The results showed that hourly average wind velocities for Kuching and Kota Kinabalu were 1.84 m/s and 2.15 m/s respectively while the highest average wind velocities was 10.1 m/s and 12.4 m/s respectively. No wind movement (i.e. 0 m/s) was recorded for both locations. The prevailing annual wind flow is generally from South-Southeast (150°) in Sarawak and from East-Southeast (110°) in Sabah. It was also found that both Kuching and Kota Kinabalu experienced strong and extreme heat stress conditions with UTCI levels of 44.8°C and 49.8°C respectively. Thus, it can be concluded that, East Malaysia faces strong and extreme heat stress conditions. This study is an original contribution on the subject of outdoor thermal environment in Malaysia, Further research to better understand outdoor thermal environmental problems is recommended

Implementation of Building Information Modeling (BIM) in Pakistan Construction Industry

This paper examines the implementation of building information modeling (BIM) in construction industry. Various initiatives and approaches are used in different countries to promote the BIM implementation in their construction industries. The real implementation and use of BIM remains a major concern of the construction industry. This study investigates the implantation of BIM globally, in developed countries and the percentage of implementation of BIM in constriction industry of Sindh, Pakistan. This research demonstrates 131 responses from BIM users regarding BIM implementation whose collaboration aspects produce the highest positive impact. The adopted methodology is an online questionnaire survey and literature review which was conducted to find out the implementation of BIM in construction industries of developed countries. This research reveals that BIM implementation is increasing continuously over the past few years. A Number of developed countries are emerging successful BIM implementation strategies, United States, United Kingdom, Germany, France are generally leading the way. However, according to our study findings, only 11% of industries have implemented BIM in Sindh, Pakistan

Preliminary Survey on the Crucial Root Causes of Material Waste Generation in Malaysian Construction Industry

Construction waste generation has been perceived as a crucial issue that has critical consequences on the project effectiveness and ecological effect of the construction industry. The key objective of the current research is to identify the root causes of material construction waste generation in Malaysia. A well-structured questionnaire was designed based on the 52 identified root causes of material waste generation. The developed questionnaire was distributed to 35 highly experienced in Malaysian construction industry experts. The collected data was analyzed by the use of mean score analysis. The top identified root causes are poor supervision during the construction stage, lack of efficient site management, last minute changes, cutting uneconomical sizes of materials, and constant design changes during the construction period. The initial findings will aid construction practitioners to focus on these root causes in order to reduce the material construction waste generation at construction sites

A factor analysis to establish a group of causes of deferred maintenance at Malaysia’s public university buildings

The building has deferred the maintenance activities either planned or scheduled and delayed from the original schedules by some factors and therefore cause dissatisfaction of the building users commonly become a familiar issue. The public university buildings are an important place, everyone gathers to learn and share knowledge. They are producing future leaders, engineers and industry players. Therefore, it is also the heart of the development of a country. Hence, this study is intended to establish a group of causes factors of deferred maintenance of public university buildings in Malaysia. Questionnaires survey were carried out amongst the targeted respondent and the Statistical Package for the Social Sciences (SPSS) software were used to analyse 220 data collections for factor analysis. The study reveals 42 factors of causes are then classified into three groups. Group 1 is the organization and it displays 20 factors, group 2 is the resources which display 13 factors and group 3 is financial display 9 factors. This study shared useful information and insight knowledge of deferred maintenance of public university buildings in Malaysia

A case study of green building in Malaysia: cost saving analysis

The building sector consumes about forty percent of world energy, making energy efficiency in existing buildings an important issue. This study has been undertaken to investigate energy consumption of a building that has been redesigned to incorporate energy efficient features. It was found that the introduction of energy efficient features has helped to achieve savings up to 46% of the total spent on energy particularly based on electricity bills