4,586 research outputs found
Analyzing Energy-efficiency and Route-selection of Multi-level Hierarchal Routing Protocols in WSNs
The advent and development in the field of Wireless Sensor Networks (WSNs) in
recent years has seen the growth of extremely small and low-cost sensors that
possess sensing, signal processing and wireless communication capabilities.
These sensors can be expended at a much lower cost and are capable of detecting
conditions such as temperature, sound, security or any other system. A good
protocol design should be able to scale well both in energy heterogeneous and
homogeneous environment, meet the demands of different application scenarios
and guarantee reliability. On this basis, we have compared six different
protocols of different scenarios which are presenting their own schemes of
energy minimizing, clustering and route selection in order to have more
effective communication. This research is motivated to have an insight that
which of the under consideration protocols suit well in which application and
can be a guide-line for the design of a more robust and efficient protocol.
MATLAB simulations are performed to analyze and compare the performance of
LEACH, multi-level hierarchal LEACH and multihop LEACH.Comment: NGWMN with 7th IEEE Inter- national Conference on Broadband and
Wireless Computing, Communication and Applications (BWCCA 2012), Victoria,
Canada, 201
Dynamically sampled multivariate empirical mode decomposition
A method for accurate multivariate local mean estimation in the multivariate empirical mode decomposition algorithm by using a statistical data-driven approach based on the Menger curvature measure and normal-to-anything variate-generation method is proposed. This is achieved by aligning the projection vectors in the direction of the maximum `activity' of the input signal by considering the local curvature of the signal in multidimensional spaces, resulting in accurate mean estimation even for a very small number of projection vectors
Environmental friendly method for the extraction of cellulose from Triflolium resopinatum and its characterization
The leaves of Triflolium resopinatum were collected from the mountains of Malakand division, Khyber Pukhtoonkhwa, Pakistan and was grinded into smaller particles and converted into powder. The ground biomass was treated with different solvents in the Soxhlet apparatus for the removal of soluble extractive like pectin, cutin and wax substances. For bond breaking the alkaline substance was kept in the autoclave. Ethylene diamine tetra-acetate (EDTA) and hydrogen peroxide (H2O2) were used for the removal of most polar substances like pectin, cutin, waxes and other extractives. Furthermore, raw cellulose was purified through acetic acid and nitric acid. Double distilled water was used for the neutralization of pH.The analysis of purified cellulose was carried out through different procedures such as X-ray Diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The extracted cellulose has high degree of purity and crystallinity (72%) and thermal stability indicating that the process for the extraction of cellulose is quite adequate. KEY WORDS: Triflolium resopinatum, Cellulose, FTIR, XRD, TGA, SEM Bull. Chem. Soc. Ethiop. 2019, 33(1), 61-68DOI: https://dx.doi.org/10.4314/bcse.v33i1.
An Empirical Investigation on Perception of Organizational Politics, Job Stress & Job Satisfaction Among Academicians in Pakistan Using Second-Order Construct
Level of job satisfactions among academicians has remained enriched area of research for the academic’s institutions. Therefore, the rationale behind conducting research was to investigate the influence of Perception of Organizational Politics (POP) and Job Stress (JSt) on Job satisfaction (JS) academicians. Research framework has been formed based on Social Exchange Theory (SET) to create logical relationships among variable which explained that employees behave accordingly as per response they received from management’s behavior. For the execution of analysis data was collected from 300 teachers of public sector universities of Punjab, Pakistan through psychometric defined instruments. Software SmartPLS was used for assessment of measurement and structural model. Results from the analysis demonstrates that POP has significant and negative effect on JS and significant positive effect on JSt while significant negative effect was observed between JSt and JS. The results revealed useful information for the stakeholders and policy makers to focus and develop and organizational structure to eliminate the influence of POP in academic institutions
Antioxidant activities of the selected plants from the family Euphorbiaceae, Lauraceae, Malvaceae and Balsaminaceae
Extraction of nine plants selected from the family Euphorbiaceae, Lauraceae, Malvaceae and Balsaminaceae was done in petroleum ether, chloroform, ethyl acetate and methanol/n-butanol in order of increasing polarity using soxhlet apparatus. Total phenolic contents were determined with Folin- Ciocalteu reagent which ranged from 30.5 to 547.0 mg GAE/g of extract. Maximum phenolic contents were found in n-butanol extract of Ricinus communis. Antioxidant activities of these extracts were evaluated through DPPH• radical scavenging, phosphomolybdate and ferric thiocyanate (FTC) methods. Methanolic extract of Cinnamomum zeylanicum and Cinnamomum tamala showed highest antiradical (96.8%) and phosphomolybdate (1.131) activity, respectively, while ethyl acetate extract of R. communis exhibited maximum lipid per-oxidation (FTC) activity (79.3%). IC50 value of chloroform extract of C. tamala (2.2 g/ml) was less than gallic acid (4.4 g/ml), while ethyl acetate and methanol extracts of Abutilon bidentatum, Impatiens bicolor and Impatiens edgeworthii exhibited the IC50 values in the range of 10.0 - 20.0 g/ml
Serum biochemical profile of two broiler strains supplemented with vitamin E, raw ginger (Zingiber officinale) and L-carnitine under high ambient temperatures
In this study, the authors evaluated the comparative effects of dietary supplementation of ginger (Zingiber officinale), vitamin E and L-carnitine on certain blood parameters of two strains of broilers in summer. A total of 320 broiler chicks (Hubbard and Cobb) were divided into two groups. The two groups were subdivided into four subgroups with four replicates with 10 chicks per replicate. In each strain subgroup was kept as control while other subgroups were provided with ginger (2%), L-carnitine (500 mg/kg) or vitamin E (250 mg/kg) in the basal diet up to 42 days old. Supplementation of the diet with vitamin E, ginger and L-carnitine significantly decreased mean cholesterol, alanine aminotransferase (ALT), glucose, triglyceride, low density lipoprotein (LDL), and increased high density lipoprotein (HDL) and serum protein concentrations. The results of vitamin E were comparatively better than those of the other two feed additives. The blood biochemical parameters did not vary between the broiler strains. From the findings of the current study, it was concluded that high ambient temperature had a negative effect on broiler hepatic and lipid profiles, and the supplementation of diets with vitamin E, ginger and L-carnitine improved broiler blood biochemical parameters.Keywords: Cholesterol, glucose, liver health, antioxidants, heat stres
Development of Simple Designs of Multitip Probe Diagnostic Systems for RF Plasma Characterization
Performance Characterization of Image Feature Detectors in Relation to the Scene Content Utilizing a Large Image Database
Selecting the most suitable local invariant feature detector for a particular application has rendered the task of evaluating feature detectors a critical issue in vision research. Although the literature offers a variety of comparison works focusing on performance evaluation of image feature detectors under several types of image transformations, the influence of the scene content on the performance of local feature detectors has received little attention so far. This paper aims to bridge this gap with a new framework for determining the type of scenes which maximize and minimize the performance of detectors in terms of repeatability rate. The results are presented for several state-of-the-art feature detectors that have been obtained using a large image database of 20482 images under JPEG compression, uniform light and blur changes with 539 different scenes captured from real-world scenarios. These results provide new insights into the behavior of feature detectors
Susceptibility of south Indian strains of Mycobacterium tuberculosis to tuberactinomycin
A total of 114 strains of Mycobacterium tuberculosis isolated from sputum samples of 114 patients of
pulmonary tuberculosis in south India, were coded and tested for their in vitro susceptibility to
tuberactinomycin (Tum) incorporated in Lowenstein-Jensen (LJ) medium. Of these strains, 95 (83.3%)
and 15 (13.2%) were susceptible to Tum at 25 and 50 mg/l respectively. Only 4 (3.5%) strains were
inhibited at 100 mg/l or more. Of the 37 drug sensitive strains, 2 (5.4%) were not susceptible to Tum at
25 mg/l compared to 17 (22.1%) of 77 strains-resistant to one or more of antituberculosis drugs (P
<0.02). The drug susceptibility pattern of the strains revealed that there was no significant association of
resistance between Tum and streptomycin or rifampicin or ethambutol or ethionamide or isoniazid.
However, 15 (53.6%) of 28 kanamycin (K) resistant strains were not susceptible to Tum at 25 mg/l. This
cross resistance between Tum and K was further studied in 24 and 15 K sensitive and resistant strains
respectively, by correlating their proportion resistance at 16 mg/l and it was found to have a significant
positive correlation (r = 0.55; X0.01)
- …