4 research outputs found
CFD modelling of a hollow fibre system for CO2 capture by aqueous amine solutions of MEA, DEA and MDEA
YesA mass transfer model was developed for CO2 capture from a binary gas mixture of N2/CO2 in hollow fibre membrane contactors under laminar flow conditions. The axial and radial diffusions through membrane and convection in tube and shell sides with chemical reaction were investigated. COMSOL software was used to numerically solve a system of non-linear equations with boundary conditions by use of the finite element method. Three different amine solutions of monoethanolamine (MEA), diethanolamine (DEA) and n-methyldiethanolamine (MDEA) were chosen as absorbent in lumen to consider the mass transfer rate of CO2 and compare their removal efficiency. The modelling results were compared with experimental data available in the literature and a good agreement was observed. The CFD results revealed that MEA had the best performance for CO2 removal as compared to DEA and MDEA under various operating conditions due to the different CO2 loading factor of absorbents. Furthermore, efficiency of CO2 removal was highly dependent on the absorbent concentration and its flow rate, increasing of the gas flow rate caused a reduction in gas residence time in the shell and consequently declined CO2 mass transfer. The modelling results showed the influence of the absorbent concentration on the CO2 mass transfer has improved due to availability of absorbent reactants at the gas-liquid interface
Recommended from our members
An experimental investigation into the permeability and selectivity of PTFE membrane: a mixture of methane and carbon dioxide
noResearch and technology innovations in the 1970s led to the significant commercial practice of gas separation by membranes that exists today. These advances involved developing membrane structures that could produce high fluxes and modules for packing a large amount of membrane area per unit volume (Murphy et al., 2009). At present, the share of using a polymeric membrane in the capture of CO2 is increasing and gradually the membrane technology is considered as the promising method in separation units, although the number of commercial membranes is not high. CO2 capture from natural gas is one of the controversial topics that many researchers and engineers try to find the best method satisfying both high efficiency and low capital cost. In common, chemical physical absorption towers are applied to remove CO2 from natural gas in order to prevent pipeline corrosion, even though the other component such as H2S gives rise to operating problems. The obscure angle of a conventional unit is related to the high energy consumption while the absorbent needs to be purified by the regeneration units which implement the temperature as a unique manipulating parameter for separating amine groups. The great advantages of using the membrane in gas industry are the low capital cost, easy installation and maintenance so that for this simple reason, new membranes come to the market for different types of processes. Capture of CO2 from natural gas accounts for one of the major difficulties so that the engineers try to employ membrane modules as to alter the process efficiency. However, there are only a limited number of membranes that can be used in real industry and the research still continues over this interesting topic (Burggraaf and Cot, 1996)
Recommended from our members
Carbon capture: Postcombustion carbon capture using polymeric membrane
N