396 research outputs found
An extension of the spectral Tau method for numerical solution of multi-order fractional differential equations with convergence analysis
AbstractThe main purpose of this paper is to provide an efficient numerical approach for the fractional differential equations (FDEs) based on a spectral Tau method. An extension of the operational approach of the Tau method with the orthogonal polynomial bases is proposed to convert FDEs to its matrix–vector multiplication representation. The fractional derivatives are described in the Caputo sense. The spectral rate of convergence for the proposed method is established in the L2 norm. We tested our procedure on several examples and observed that the obtained numerical results confirm the theoretical prediction of the exponential rate of convergence
Two secure non-symmetric role Key-Agreement protocols
Recently, some two-party Authenticated Key Agreement protocols over elliptic curve based algebraic groups, in the context of Identity-Based cryptography have been proposed. The main contribution of this category of protocols is to reduce the complexity of performing algebraic operations through eliminating the need to using Bilinear Pairings. In this paper, we proposed two novel Identity-Based Authenticated Key Agreement protocols over non-symmetric role participants without using Bilinear Pairings. The results show that our proposed schemes beside of supporting security requirements of Key Agreement protocols, require a subset of operations with low complexity in compare with related protocols in this scientific area
Hydrothermal liquefaction versus catalytic hydrodeoxygenation of a bioethanol production stillage residue to platform chemicals:A comparative study
Biobased chemicals like phenols and aromatics are preferably produced from cheap biomass waste streams. In this work, we have explored the potential of a eucalyptus-derived second generation bioethanol production stillage (BPS) residue for this purpose. A comparative study between a hydrothermal liquefaction (HTL) and a catalytic hydrodeoxygenation (HDO) step, as well as a 2-step HTL-HDO approach is reported, targeting at value-added low molecular weight platform chemicals (mainly alkylphenols and aromatics). HDO was observed to be a more suitable strategy than HTL for the production of organic oils enriched in valuable monomers. The direct HDO of the BPS using a commercial Ru/C catalyst at 450 degrees C and 100 bar H-2 pressure led to an organic product oil (30.7 wt%) with a total monomer yield of 25.2 wt% (13.2 wt% of alkylphenolic+aromatics), compared to a 53.2 wt% of a product oil with 10.0 wt% monomers for the HTL step (305 degrees C). A 2-step HTL-HDO strategy was compared with the direct HDO approach. Comparable alkylphenolic+aromatic yields were obtained through this approach based on initial BPS intake (13.2 wt% vs 12.3 wt% for the direct HDO and HTL-HDO approach, respectively). Lower HTL temperatures (305 degrees C) for the first step are preferred to prevent over hydrogenation in the subsequent HDO step. As such, HTL appears a suitable pre-treatment for BPS and can (i) solve the issues related to the feeding of solids in pressurized continuous reactors for HDO and (ii) prevent coke formation during the HDO step, thus improving catalyst stability and durability
Plasma-arc-flow technology for sustainable treatment of high-impact fluid waste. A graphene-based material for industrial-wastewater purification
The research presented aimed to address the treatment of fluid waste with significant environmental impact by utilizing plasma technology, specifically plasma arc flow (PAF). The goal was to develop a novel purification material based on graphene for industrial applications and to optimize the treatment process. Analysis and monitoring of a submerged arc plasma reactor were the main goals of this research. This entailed a careful examination of the incoming wastewater that needed to be treated with the goal of identifying its precise composition characteristics with the relative tolerances needed for the reactions that were to follow in the reactor. The focus of the analysis was on input-parameter optimization, production of characteristic curves, and analysis of the factors affecting hydrogen evolution in syngas. Additionally, the study investigated how to determine the best viscosity for a particular input matrix by carrying out an evaluation study. The effects of this parameter were thought to be reduced by preheating the incoming wastewater through heat recovery. The long-term objective of the research is to create filters that can purify the water used and produced in gasification processes as well as to characterize the fixed reside from the gasifier for potential conversion into graphene-based material. In addition, this work acknowledges that additional experiments are required to validate its purifying capacity on wastewater produced by various industrial processes. Moreover, the inclusion of plans to model the evolution of hydrogen in PAF using the CHEMCAD software® and defining guidelines for optimizing parameters for enhanced energy efficiency showcased the research’s ambition to expand and refine its scope. Finding the best plant solutions that can significantly reduce electricity consumption is the ultimate goal. In summary, the study demonstrated significant advancement in the analysis and optimization of fluid-waste treatment with high environmental impact through the use of plasma technology, specifically PAF. A thorough and forward-looking approach was demonstrated by the use of modeling software, experimental studies, and plans for future research. The potential creation of graphene-based filters and the use of the fixed residue as a useful material further highlight the innovativeness of this research
Evaluation of corneal higher order aberrations in normal topographic patterns
Purpose: This study reports the characteristics of corneal higher order aberrations (HOAs) in eyes with normal topographic pattern using the Pentacam scheimpflug system. Methods: In this prospective, observational, comparative study, 165 eyes of 97 patients separated into five groups based on corneal topographic patterns were enrolled. All eyes received a comprehensive ophthalmologic examination including corneal tomographic analysis with the Pentacam system. Keratometry, corneal cylinder, and corneal aberrometric data were recorded and analyzed. Root mean square values (RMS) were calculated for corneal HOAs up to the 6th order, total coma, total trefoil, total spherical aberration, total tetrafoil, and higher order astigmatism. Evaluation of these data to discriminate between the five groups was assessed using the analysis of variance test by Generalized Estimation Equation Linear Model. Results: Corneal HOAs were found to be significantly higher for Asymmetric Bow Tie and Irregular groups than other groups (p = <0.001). RMS of total coma aberration (Z3-1, Z31, Z5-1, Z51) were significantly greater in the Asymmetric Bow Tie pattern than others, and RMS of total Spherical aberration (Z40, Z60) was significantly higher in the Irregular pattern than other groups (p = <0.001). The results of our study demonstrate that a tendency toward significant higher values of trefoil, tetrafoil, and higher order astigmatism in Irregular pattern (all p < 0.05). Significantly higher amounts of 3rd order RMS in Asymmetric Bow Tie group and 4th to 6th order RMS in Irregular pattern group were other outcomes of our study (p = <0.001). Conclusions: Based on results in this study, there were a good correlation between corneal topographic pattern and corneal HOAs in normal eyes. These results indicate that the corneal HOAs values are largely determined by the topographic patterns. A larger sample size would perhaps have been beneficial to yield in more accurate outcomes. © 2016 Iranian Society of Ophthalmology
Challenges of managing diabetes in Iran: Meta-synthesis of qualitative studies
Background: Although several diabetes management and control programmes are introduced in Iran, many patients do not achieve diabetes-related clinical goals as recommended. The aim of this study was to identify the qualitative evidence for the challenges regarding diabetes management. Methods: A systematic review of qualitative studies following PRISMA guidelines was undertaken. Scopus, PubMed, Science Direct, and Web of Knowledge were searched as well as Persian databases including Magiran, Irandoc and SID from inception to August 2019. The included Studies were either in English- or Persian-language qualitative studies reporting the perspectives of patients, their relatives, or healthcare service providers. Content of the findings were analysed and organized according to Chronic Care Model framework. Results: Twelve studies met the inclusion criteria. Six main themes were identified including holistic understanding of patients, leadership and governance difficulties, service delivery, workforce, financing, and information and research. Conclusion: Challenges regarding the management of diabetes in Iran is multifaceted. Reforming the health care system or developing complementary strategies is essential to improve suitable health care model for patients with chronic conditions such as diabetic patients. © 2020 The Author(s)
Cooperation in a transboundary river basin: a large-scale socio-hydrological model of the Eastern Nile
While conflict-and-cooperation phenomena in transboundary basins have been widely studied, much less work has been devoted to representing the process interactions in a quantitative way. This paper identifies the main factors in the riparian countries' willingness to cooperate in the Eastern Nile River basin, involving Ethiopia, Sudan, and Egypt, from 1983 to 2016. We propose a quantitative model of the willingness to cooperate at the national and river basin scales. Our results suggest that relative political stability and foreign direct investment can explain Ethiopia's decreasing willingness to cooperate between 2009 and 2016. Further, we show that the 2008 food crisis may account for Sudan recovering its willingness to cooperate with Ethiopia. Long-term lack of trust among the riparian countries may have reduced basin-wide cooperation. While the proposed model has some limitations regarding model assumptions and parameters, it does provide a quantitative representation of the evolution of cooperation pathways among the riparian countries, which can be used to explore the effects of changes in future dam operation and other management decisions on the emergence of conflict and cooperation in the basin
Role of Multi-Wall Carbon Nanotubes on the main parameters of the Electrical Discharge Machining (EDM) process
Electrical discharge machining is a very accurate non-traditional manufacturing process for creating tiny apertures, complex shapes and geometries within mechanical parts and assemblies. Its performance is evaluated in terms of surface roughness, existence of cracks, voids and recast layer on the surface of product. The high heat generated on the electrically discharged material during the EDM process unfortunately decreases the quality of product. In this paper the high strength and unique electrical and thermal properties of multi-wall carbon nanotubes are used to improve the EDM performance when machining the AISI H13 tool steel, by means of copper electrodes. Material removal rate, electrode wear rate, surface roughness and recast layer were measured in presence of carbon nanotubes in the dielectric, then compared to the outcome of traditional EDM. Experiments show that mixing multi-wall carbon nanotubes within the dielectric makes the EDM more efficient, particularly if machining parameters are set at low pulse of energ
- …