55 research outputs found
Recommended from our members
Heavy ion irradiation damage in Zr3(Al0.9Si0.1)C2 MAX phase
© 2020 Elsevier B.V. A Zr3(Al0.9Si0.1)C2 MAX phase-based ceramic with 22 wt.% ZrC and 10 wt.% Zr5Si3 has been irradiated with 52 MeV I9+ ions at room temperature, achieving a maximum dose of 8 displacements per atom (dpa). The response of this MAX phase-rich material to irradiation has been studied using scanning electron microscopy, transmission electron microscopy and X-ray diffraction techniques. Post-irradiation examination of the material revealed a number of crystalline changes to the MAX phase. At low doses, Zr3(Al0.9Si0.1)C2 maintained a high degree of crystallinity, while at the highest doses, its degree of crystallinity was reduced significantly. A number of radiation-induced phase transformations were observed, including the decomposition of Zr3(Al0.9Si0.1)C2 into ZrC and other phases, and the formation of β-Zr3(Al,Si)C2, a MAX phase with a rearranged stacking sequence. Microstructural examination revealed that the majority of the extended defects in Zr3(Al0.9Si0.1)C2 lie in the (0001) basal planes. Analysis of X-ray diffraction profiles after heat treating the 8 dpa-irradiated material for 1 h at 300 °C and at 600 °C showed that there were only subtle changes to the profiles relative to that of the 8 dpa-irradiated material which had not been heat treated. Overall, the experimental results of this study show that the Zr3(Al0.9Si0.1)C2 MAX phase responds less well to irradiation relative to other MAX phases irradiated with high energy heavy ions at room temperature
Investigation of ion irradiation induced damages in iron phosphate glasses: Role of electronic and nuclear losses in glass network modification
Ion irradiation was used as a surrogate approach to mimic radiation induced modification in iron phosphate glass network. To understand the synergetic effect of electronic and nuclear energy losses in glass network modification, ions at different energies were employed. The iron phosphate glasses were irradiated with Au ions at different ion energies between 750 keV and 20 MeV. The ion beam irradiated samples were characterised by employing different techniques.The Fe L2,3- edge X-ray absorption spectra of irradiated samples reveal reduction of Fe3+ to Fe2+, induced by ion beam irradiation. X-ray diffraction and electron microscopy imaging confirm formation of crystalline Fe3(P2O7)2, Fe4(P2O7)3, Fe(PO)4, and Fe(PO3)3 phases. The origin of these crystalline phases may be attributed to induced stress in irradiated samples. The observed decrease in hardness of irradiated samples was attributed to formation of non-bridging oxygen
In Situ Characterisation of Permanent Magnetic Quadrupoles for focussing proton beams
High intensity laser driven proton beams are at present receiving much
attention. The reasons for this are many but high on the list is the potential
to produce compact accelerators. However two of the limitations of this
technology is that unlike conventional nuclear RF accelerators lasers produce
diverging beams with an exponential energy distribution. A number of different
approaches have been attempted to monochromise these beams but it has become
obvious that magnetic spectrometer technology developed over many years by
nuclear physicists to transport and focus proton beams could play an important
role for this purpose. This paper deals with the design and characterisation of
a magnetic quadrupole system which will attempt to focus and transport
laser-accelerated proton beams.Comment: 20 pages, 42 figure
Experimental investigation of high-energy photon splitting in atomic fields
The new data analysis of the experiment, where the photon splitting in the
atomic fields has been observed for the first time, is presented. This
experiment was performed at the tagged photon beam of the ROKK-1M facility at
the VEPP-4M collider. In the energy region of 120-450 MeV, the statistics of
photons incident on the BGO target was collected. About 400
candidates to the photon splitting events were reconstructed. Within the
attained experimental accuracy, the experimental results are consistent with
the cross section calculated exactly in an atomic field. The predictions
obtained in the Born approximation significantly differ from the experimental
results.Comment: 11 pages, 6 figures, LaTe
Radiation damage tolerance of a novel metastable refractory high entropy alloy V2.5Cr1.2WMoCo0.04
A novel multicomponent alloy, V2.5Cr1.2WMoCo0.04, produced from elements expected to favour a BCC crystal structure, and to be suitable for high temperature environments, was fabricated by arc melting and found to exhibit a multiphase dendritic microstructure with W-rich dendrites and V–Cr segregated to the inter-dendritic cores. The as-cast alloy displayed an apparent single-phase XRD pattern. Following heat treatment at 1187 °C for 500 h the alloy transformed into three different distinct phases - BCC, orthorhombic, and tetragonal in crystal structure. This attests to the BCC crystal structure observed in the as-cast state being metastable. The radiation damage response was investigated through room temperature 5 MeV Au+ ion irradiation studies. Metastable as-cast V2.5Cr1.2WMoCo0.04 shows good resistance to radiation induced damage up to 40 displacements per atom (dpa). 96 wt% of the as-cast single-phase BCC crystal structure remained intact, as exhibited by grazing incidence X-ray diffraction (GI-XRD) patterns, whilst the remainder of the alloy transformed into an additional BCC crystal structure with a similar lattice parameter. The exceptional phase stability seen here is attributed to a combination of self-healing processes and the BCC structure, rather than a high configurational entropy, as has been suggested for some of these multicomponent “High Entropy Alloy” types. The importance of the stability of metastable high entropy alloy phases for behaviour under irradiation is for the first time highlighted and the findings thus challenge the current understanding of phase stability after irradiation of systems like the HEAs
Elastic and Raman scattering of 9.0 and 11.4 MeV photons from Au, Dy and In
Monoenergetic photons between 8.8 and 11.4 MeV were scattered elastically and
in elastically (Raman) from natural targets of Au, Dy and In.15 new cross
sections were measured. Evidence is presented for a slight deformation in the
197Au nucleus, generally believed to be spherical. It is predicted, on the
basis of these measurements, that the Giant Dipole Resonance of Dy is very
similar to that of 160Gd. A narrow isolated resonance at 9.0 MeV is observed in
In.Comment: 31 pages, 11 figure
High temperature and ion implantation-induced phase transformations in novel reduced activation Si-Fe-V-Cr (-Mo) high entropy alloys
For fusion to be realized as a safe, sustainable source of power, new structural materials need to be developed which can withstand high temperatures and the unique fusion radiation environment. An attractive aspect of fusion is that no long-lived radioactive wastes will be produced, but to achieve this structural materials must comprise reduced activation elements. Compositionally complex alloys (CCAs) (also called high entropy alloys, HEAs) are promising candidates for use in extreme environments, including fusion, but few reported to date have low activation. To address these material challenges, we have produced novel, reduced activation, HEAs by arc-melting, and investigated their thermal stability, and radiation damage resistance using 5 MeV Au2+ ion implantation. Whilst the alloys were designed to form single phase BCC, using room temperature and non-ambient in situ X-ray diffraction we have revealed the thermodynamically stable structure of these alloys is in fact a sigma phase. We propose that a BCC phase is formed in these alloys, but at high temperatures (>1000°C). A BCC phase was also formed during heavy ion implantation, which we propose to be due to the rapid heating and cooling that occurs during the thermal spike, effectively freezing in the BCC phase produced by an implantation induced phase transformation. The BCC phase was found to have high hardness and a degree of ductility, making these new alloys attractive in the development of reduced activation HEAs for nuclear applications
- …