Global Assessment of Urological Endoscopic Skills (GAUES):development and validation of a novel assessment tool to evaluate endourological skills

Objective: To develop and evaluate an assessment tool for endourological skills during simulation including cystoscopy, ureteroscopy (URS) and transurethral resection (TUR) procedures. Methods: We designed a Global Assessment of Urological Endoscopic Skills (GAUES) tool, comprised of nine endourology task-specific and two global-rating skills items. The tool was developed through two rounds of the Delphi process. The GAUES tool was used to assess acquisition of URS and TUR skills of novices (Year 2 core surgical trainees, CT2) and intermediate level trainees (residents at the start of the UK higher surgical training programme in Urology, Speciality Trainee Year 3, ST3) at the Urology Simulation Boot Camp (USBC) between 2016 and 2018. Validity was evaluated by comparing scores between trainees with different levels of urological experience. Inter-rater reliability was also assessed. Results: We evaluated 130 residents, 52% of trainees were at an intermediate stage of training and 39% were novices. In all, 9% of the anonymous forms were missing demographics. The completion rate of the GAUES tool during the USBC for URS and TUR was 85% and 89%, respectively. Our analysis demonstrated a significant difference in all domains between intermediates and novices at assessment in URS, except for one domain more suited to clinical assessment (P\ua0=\ua00.226). There was excellent intraclass correlation (ICC) overall between the two experts’ judgements, ICC\ua0=\ua00.841 (95% confidence interval 0.767–0.893; P\ua

The effectiveness of varicocele embolisation for the treatment of varicocele related orchalgia

PURPOSE: Orchalgia is a common problem with varicoceles however the association between varicocele embolisation for the treatment of varicocele related pain has not been widely investigated. We aim to investigate the effectiveness of varicocele embolisation for the treatment of orchalgia secondary to varicoceles; and to see if pre-embolisation pain scores can be used to predict treatment outcomes. METHODS: A prospectively collected database of patients undergoing varicocele embolisation for pain was analysed over a 10-year period. Pain scores were assessed with a 10-point visual analogue score. Analgesia requirements and satisfaction scores were assessed with questionnaires. RESULTS: Total of 96 cases. Median age was 34 years old. Median pain scores reduced significantly following embolisation (p < 0.001). 74% had reduced pain (30% of these had resolution of pain), 24% had no change in symptoms and 1% had worsening pain. Those with moderate or severe pain had a reduction of pain in 81 and 79% of cases respectively, however 64% of cases with mild pain did not experience any benefit. We also noted a reduction in analgesia requirements and a median satisfaction score of 8/10. CONCLUSION: Primary varicocele embolisation can successfully reduce varicocele related orchalgia. It works best in those with moderate or severe pain. The majority of patients with mild pain may not experience any benefit so should be counseled appropriately. The classification of patients into those with mild, moderate or severe symptoms prior to embolisation should be done, so robust consenting can be performed

Three-dimensional printing versus conventional machining in the creation of a meatal urethral dilator: Development and mechanical testing

Background: Three-dimensional (3D) printing is a promising technology, but the limitations are often poorly understood. We compare different 3D printing methods with conventional machining techniques in manufacturing meatal urethral dilators which were recently removed from the Australian market. Methods: A prototype dilator was 3D printed vertically orientated on a low-cost fused deposition modelling (FDM) 3D printer in polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). It was also 3D printed horizontally orientated in ABS on a high-end FDM 3D printer with soluble support material, as well as on an SLS 3D printer in medical nylon. The dilator was also machined in stainless steel using a lathe. All dilators were tested mechanically in a custom rig by hanging calibrated weights from the handle until the dilator snapped. Results: The horizontally printed ABS dilator experienced failure at a greater load than the vertically printed PLA and ABS dilators, respectively (503 g vs 283 g vs 163 g, p < 0.001). The SLS nylon dilator and machined steel dilator did not fail. The steel dilator is the most expensive with a quantity of five at 98 USD each, but this decreases to 30 USD each for a quantity of 1000. In contrast, the cost for the SLS dilator is 33 USD each for five and 27 USD each for 1000. Conclusions: Low-cost FDM 3D printing is not a replacement for conventional manufacturing. 3D printing is best used for patient-specific parts, prototyping or manufacturing complex parts that have additional functionality that cannot otherwise be achieved

Penile strangulation due to metallic foreign body; A rare case report highlighting effective management strategies for clinicians

Penile strangulation from a foreign body is a time critical and rare presentation to the emergency department. The rarity of the presentation leads to its management being haphazard by the treating clinicians leading to suboptimal outcomes. We present a 44-year-old male with nine metal rings strangulating his penis and scrotum who failed multiple attempts by the department to free the penis and required an industrial circular saw provided by the fire-brigade to successfully cut the rings. We utilise this rare case of penile strangulation to outline steps health professionals can take to manage this condition in a timely fashion

Intrarenal pressure and irrigation flow with commonly used ureteric access sheaths and instruments

INTRODUCTION: Flexible ureterorenoscopy is becoming a first-line treatment for many intrarenal stones. Ureteric access sheaths are commonly used to aid access, stone removal and reduce intrarenal pressure. We evaluated the effects of two commonly used access sheaths on irrigation flow and intrarenal pressure during flexible ureterorenoscopy. We measured the effect of scope instrumentation on flow and pressure.MATERIAL AND METHODS: We utilized a 10/12F and 12/14F, 35 cm Re-Trace™ access sheath with a FlexX2 scope in a cadaveric porcine kidney. We evaluated the effect of four Nitinol baskets (1.3F, 1.5F, 1.9F, 2.2F), three different 200 µm laser fibres and a hand-held pump. Measurements of irrigation flow and intrarenal pressure were recorded and compared between the different sized access sheaths.RESULTS: Flow rates varied widely between access sheaths. Without instrumentation, mean flow was 17 mls/min (10/12F access sheath), versus 33 mls/min (12/14F sheath) (p &lt;0.0001). Increasing basket size produced a gradual reduction in flow and pressure in both access sheaths. Reassuringly, pressures were low overall (&lt;40 cm H2O). Pressures were significantly reduced when using the larger 12/14F sheath, with and without all instrumentations (p &lt;0.0001). Hand-held pump devices have a marked effect on flow and pressure in both sheaths; with pressures rising up to 121 cm H2O with a 10/12F sheath, versus 29 cm H2O (12/14F) (p &lt;0.0001).CONCLUSIONS: A 12/14F access sheath offered significantly improved irrigation whilst maintaining significantly lower intrarenal pressure, when compared to a 10/12F access sheath in a cadaveric porcine model. Scope instrumentation affects irrigation flow and pressure in both sized sheaths. Furthermore, there should be caution with hand-held pump devices, especially with smaller sized sheaths, as intrarenal pressure can be very high.</p