Face mask integrated with flexible and wearable manganite oxide respiration sensor

Face masks are key personal protective equipment for reducing exposure to viruses and other environmental hazards such as air pollution. Integrating flexible and wearable sensors into face masks can provide valuable insights into personal and public health. The advantages that a breath-monitoring face mask requires, including multi-functional sensing ability and continuous, long-term dynamic breathing process monitoring, have been underdeveloped to date. Here, we design an effective human breath monitoring face mask based on a flexible La0.7Sr0.3MnO3 (LSMO)/Mica respiration sensor. The sensor’s capabilities and systematic measurements are investigated under two application scenes, namely clinical monitoring mode and daily monitoring mode, to monitor, recognise, and analyse different human breath status, i.e., cough, normal breath, and deep breath. This sensing system exhibits super-stability and multi-modal capabilities in continuous and long-time monitoring of the human breath. We determine that during monitoring human breath, thermal diffusion in LSMO is responsible for the change of resistance in flexible LSMO/Mica sensor. Both simulated and experimental results demonstrate good discernibility of the flexible LSMO/Mica sensor operating at different breath status. Our work opens a route for the design of novel flexible and wearable electronic devices

Elsinochrome phytotoxin production and pathogenicity of Elsinoë arachidis isolates in China.

Peanut scab caused by Elsinoë arachidis is found throughout China's peanut-growing areas. Elsinochrome produced by E. arachidis is a perylenequinone photosensitive mycotoxin vital to the pathogenic process of the pathogen. In this study, the complex mechanism underlying the regulation of elsinochrome biosynthesis by E. arachidis was investigated based on various nutritional and environmental factors. The initiation of elsinochrome biosynthesis depends on light. E. arachidis produced substantially more quantities of elsinochrome when grown on a semi-synthetic medium (PDA) than when grown on synthetic media with defined ingredients in the presence of light. Elsinochrome accumulation decreased when adjusted with either citrate or phosphate buffers and changing pH suppressed the radical growth. At temperatures ranging from 10°C to 25°C, the production of elsinochrome increased, peaking at 28°C, and it decreased slightly at 30°C. 63 field-collected isolates from China were assessed for the level of elsinochrome production, and pathogenicity analysis was conducted by selecting 12 strains from each 3 of the 4 groups with different levels of elsinochrome production. A direct correlation was observed between elsinochrome production and pathogenicity among the isolates. The results showed elsinochrome biosynthesis to be controlled by E. arachidis and showed elsinochrome to be a vital virulence factor of E. arachidis, required for disease severity

Effects of n-3 PUFA supplementation on oocyte in vitro maturation in mice with polycystic ovary syndrome

Abstract n-3 PUFAs are classic antioxidant that can be used to treat follicular dysplasia and hyperinsulinemia caused by excessive oxidative stress in PCOS women. To investigate the effect of n-3 PUFA supplementation on the oocyte quality of polycystic ovary syndrome (PCOS) mice during in vitro maturation, a PCOS mouse model was established by dehydroepiandrosterone (DHEA). The GV oocytes of the control and PCOS groups were collected and cultured in vitro with or without n-3 PUFAs. After 14 h, the oocytes were collected. Our data demonstrated that the oocyte maturation rate of PCOS mice significantly increased after the addition of 50 µM n-3 PUFAs. The results of immunofluorescence showed that the abnormal rates of spindles and chromosomes in the PCOS + n-3 PUFA group were lower than those in the PCOS group. The mRNA expression of an antioxidant-related gene (Sirt1) and DNA damage repair genes (Brca1/Msh2) was found to be significantly rescued after n-3 treatment. Additionally, the results of living cell staining showed that the addition of n-3 PUFAs could reduce the levels of reactive oxygen species and mitochondrial superoxide in PCOS oocytes. In conclusion, the addition of 50 µM n-3 PUFAs during the in vitro maturation of PCOS mouse oocytes can improve the maturation rate by reducing the level of oxidative stress and the rate of spindle/chromosome abnormalities, providing valuable support during the IVM process

Droplet-based mechanical transducers modulated by the symmetry of wettability patterns

Abstract Asymmetric mechanical transducers have important applications in energy harvesting, signal transmission, and micro-mechanics. To achieve asymmetric transformation of mechanical motion or energy, active robotic metamaterials, as well as materials with asymmetric microstructures or internal orientation, are usually employed. However, these strategies usually require continuous energy supplement and laborious fabrication, and limited transformation modes are achieved. Herein, utilizing wettability patterned surfaces for precise control of the droplet contact line and inner flow, we demonstrate a droplet-based mechanical transducer system, and achieve multimodal responses to specific vibrations. By virtue of the synergistic effect of surface tension and solid-liquid adhesion on the liquid dynamics, the droplet on the patterned substrate can exhibit symmetric/asymmetric vibration transformation when the substrate vibrates horizontally. Based on this, we construct arrayed patterns with distinct arrangements on the substrate, and employ the swarm effect of the arrayed droplets to achieve three-dimensional and multimodal actuation of the target plate under a fixed input vibration. Further, we demonstrate the utilization of the mechanical transducers for vibration management, object transport, and laser modulation. These findings provide a simple yet efficient strategy to realize a multimodal mechanical transducer, which shows significant potential for aseismic design, optical molding, as well as micro-electromechanical systems (MEMS)

High Capacity and Superior Cyclic Performances of All-Solid-State Lithium Batteries Enabled by a Glass–Ceramics Solo

By using highly Li-ion conductive 78Li₂S–22P₂S₅ glass–ceramic (7822gc) as both the electrolyte and active material in the composite cathode obtained via ball-milling the 7822gc with multiple carbons, a kind of monolithic all-solid-state batteries were prepared with a lithium–indium foil as the anode. Such 7822gc-based monolithic batteries present stable discharge capacity of 480.3 mA h g^–1 at 0.176 mA cm^–2 after 60 cycles, which is three times larger than that of the previous work, with the highest capacity obtained so far among all attempts of using sulfide electrolytes as the active materials. High capacity retention of 90.6% and Coulombic efficiency of higher than 99% with high active material loading of 7 mg cm^–2 were also obtained. X-ray photoelectron spectroscopy was used to reveal the electrochemical reaction mechanisms in the 7822gc cathode

Contact engineering for organic CMOS circuits

Organic field-effect transistors (OFETs) have been widely studied, but there are still challenges to achieving large-scale integration in organic complementary metal–oxide–semiconductor (CMOS) circuits. In this article, we discuss the issues on organic CMOS circuits from a device perspective. Our discussion begins with a systematic analysis of the principal parameters of the building block, a CMOS inverter, including gain, noise margin, and power dissipation, as well as the relevant challenges and the potential solutions. We then review state-of-the-art organic CMOS inverters and their fabrications. Finally, we focus on the approaches to optimize organic CMOS circuits from a specific point of view of the contact engineering, particularly for N-type OFETs

Age-related elevation of O-GlcNAc causes meiotic arrest in male mice

Abstract In recent years, the postponement of childbearing has become a critical social issue. Male fertility is negatively associated with age because of testis aging. Spermatogenesis is impaired with age, but the molecular mechanism remains unknown. The dynamic posttranslational modification O-linked N-acetylglucosamine (O-GlcNAc), which is a type of monosaccharide modification, has been shown to drive the process of aging in various systems, but it has not yet been investigated in the testis and male reproductive aging. Thus, this study aims to investigate the alteration of O-GlcNAc with aging and explore the role of O-GlcNAc in spermatogenesis. Here, we demonstrate that the decline in spermatogenesis in aged mice is associated with elevation of O-GlcNAc. O-GlcNAc is specifically localized in differentiating spermatogonia and spermatocytes, indicating its crucial role in meiotic initiation and progression. Mimicking the age-related elevation of O-GlcNAc in young mice by disabling O-GlcNAcase (OGA) using the chemical inhibitor Thiamet-G can recapitulate the impairment of spermatogenesis in aged mice. Mechanistically, the elevation of O-GlcNAc in the testis leads to meiotic pachytene arrest due to defects in synapsis and recombination. Furthermore, decreasing O-GlcNAc in aged testes using an O-GlcNAc transferase (OGT) inhibitor can partially rescue the age-related impairment of spermatogenesis. Our results highlight that O-GlcNAc, as a novel posttranslational modification, participates in meiotic progression and drives the impairment of spermatogenesis during aging

Are medical record front page data suitable for risk adjustment in hospital performance measurement? Development and validation of a risk model of in-hospital mortality after acute myocardial infarction

Objectives To develop a model of in-hospital mortality using medical record front page (MRFP) data and assess its validity in case-mix standardisation by comparison with a model developed using the complete medical record data.Design A nationally representative retrospective study.Setting Representative hospitals in China, covering 161 hospitals in modelling cohort and 156 hospitals in validation cohort.Participants Representative patients admitted for acute myocardial infarction. 8370 patients in modelling cohort and 9704 patients in validation cohort.Primary outcome measures In-hospital mortality, which was defined explicitly as death that occurred during hospitalisation, and the hospital-level risk standardised mortality rate (RSMR).Results A total of 14 variables were included in the model predicting in-hospital mortality based on MRFP data, with the area under receiver operating characteristic curve of 0.78 among modelling cohort and 0.79 among validation cohort. The median of absolute difference between the hospital RSMR predicted by hierarchical generalised linear models established based on MRFP data and complete medical record data, which was built as ‘reference model’, was 0.08% (10th and 90th percentiles: −1.8% and 1.6%). In the regression model comparing the RSMR between two models, the slope and intercept of the regression equation is 0.90 and 0.007 in modelling cohort, while 0.85 and 0.010 in validation cohort, which indicated that the evaluation capability from two models were very similar.Conclusions The models based on MRFP data showed good discrimination and calibration capability, as well as similar risk prediction effect in comparison with the model based on complete medical record data, which proved that MRFP data could be suitable for risk adjustment in hospital performance measurement

CEPC Technical Design Report -- Accelerator

International audienceThe Circular Electron Positron Collider (CEPC) is a large scientific project initiated and hosted by China, fostered through extensive collaboration with international partners. The complex comprises four accelerators: a 30 GeV Linac, a 1.1 GeV Damping Ring, a Booster capable of achieving energies up to 180 GeV, and a Collider operating at varying energy modes (Z, W, H, and ttbar). The Linac and Damping Ring are situated on the surface, while the Booster and Collider are housed in a 100 km circumference underground tunnel, strategically accommodating future expansion with provisions for a Super Proton Proton Collider (SPPC). The CEPC primarily serves as a Higgs factory. In its baseline design with synchrotron radiation (SR) power of 30 MW per beam, it can achieve a luminosity of 5e34 /cm^2/s^1, resulting in an integrated luminosity of 13 /ab for two interaction points over a decade, producing 2.6 million Higgs bosons. Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons, facilitating precise measurements of Higgs coupling at sub-percent levels, exceeding the precision expected from the HL-LHC by an order of magnitude. This Technical Design Report (TDR) follows the Preliminary Conceptual Design Report (Pre-CDR, 2015) and the Conceptual Design Report (CDR, 2018), comprehensively detailing the machine's layout and performance, physical design and analysis, technical systems design, R&D and prototyping efforts, and associated civil engineering aspects. Additionally, it includes a cost estimate and a preliminary construction timeline, establishing a framework for forthcoming engineering design phase and site selection procedures. Construction is anticipated to begin around 2027-2028, pending government approval, with an estimated duration of 8 years. The commencement of experiments could potentially initiate in the mid-2030s