Rescuing the Environment: Turning (Micro)plastics into Energy Through Gasification

Plastics are a common residue of our activities and, when incorrectly disposed, high quantities of this type of products end up in the environment, namely through landfilling and dumping into the aquatic compartments. Therefore, water streams and basins are contaminated threatening wildlife, which ultimately can entail human toxicity by means of the food-chain effect. One of the major concerns relies on microplastics which, due to its size and nature, constitute a more difficult to handle residue. This paper presents an endeavour to control, reduce or even mitigate the presence of plastic debris in the environment, with the benefit of converting them into energy or other valuable commodities for the actual society. Gasification can be seen as one of the most effective techniques for this purpose, featuring a more environmental friendly scheme for treating this kind of residues, avoiding their overspread throughout Nature, as well as complying with environmental policies

Pulsating Flow Effects on Hydrodynamics in a Desalination Membrane Filled with Spacers

A previously developed and validated two-dimensional computational fluid dynamics (CFD) model to study the hydrodynamics in a desalination membrane filled with spacers in zig-zag arrangements has been further developed to include the effects of a pulsating flow with the profile of a heartbeat. Numerical solutions were obtained with Fluent for pulsating laminar flows in channels filled with four different spacers and four lengths of cells. Hydrodynamics was investigated for unsteady state, using a characteristic function of a heartbeat, in order to study the influence of temporal variation in the hydrodynamic behavior. The results show the velocities distribution, streamlines, pressure drop and the wall shear stress on the impermeable wall of the membrane, for Reynolds numbers up to 100. The reduction in the distance between the filaments of the spacers, leads to the appearance of more active recirculation zones that can promote mass transfer and decreasing concentrations layers. On the other hand, this reduction increases the pressure drop and consequently the energy expended in the process. Further, the characteristic function of heartbeat demonstrates promising results, with regard to the energy consumption in the process and optimization of the recirculation zones

Advantages of Using a Block Unstructured Grid in a Casting Scenario

Numerical modeling of heat transfer during solidification has become widespread in the foundry industry. This is because it is possible to investigate the effects of adjustment to the casting variables on final casting quality, without having to do costly trial-and-error experiments. After selecting a suitable mathematical model, one has to choose an appropriate discretization method. If the grid is very fine, each type of method yields the same solution. However, some methods are more suitable to some classes of problems than others. The main objective of this paper is to demonstrate the advantages of using a block unstructured grid in combination with a generalized curvilinear formulation in a casting scenario and compare the performance of two discretization methods, finite differences (FD) and finite volume (FV). The validation of the numerical procedure is done by comparison with measurements which experimental set up is also described. A very good agreement of both numerical methods were verified with a slightly advantage for the finite volume method. Block unstructured grids works well with both discretization methods, allows obtain any physical feature in specific positions of the domain and is suitable for parallel computation; in combination with a generalized curvilinear formulation allows avoid geometric complexities and the development of more efficient algorithms.

Experimental and Numerical Analysis of Coffee Husks Biomass Gasification in a Fluidized Bed Reactor

AbstractA two-dimensional computational model was developed in order to describe the biomass gasification process in a fluidized bed reactor using coffee husks within the commercial CFD code FLUENT. Both, gas phase and solid phase, were described using and eulerian-eulerian approach exchanging mass, energy and momentum. Results from the numerical model were later compared with experimental data. The study was conducted in a pilot thermal gasification plant, installed at Portalegre's Industrial Park based on the fluidized bed technology, with a processing capacity of 70kg/h, and operating at around 800°C. The gasification tests were performed continuously for several days in order to optimize the heat value and composition of produced syngas. The simulated syngas composition is in good agreement with the experimental ones although slight deviation was shown especially on CO and H2. This was mainly due to kinetics were taken from literature and, and there for may differ greatly from one source to another. Also devolatilization was assumed instantaneous and no particular attention was paid to char conversion

Numerical Simulation of Two-Phase Flow Around Flatwater Competition Kayak Design-Evolution Models

The aim of the current study was to analyze the hydrodynamics of three kayaks: 97-kg-class, single-rower, flatwater sports competition, full-scale design evolution models (Nelo K1 Vanquish LI, LII, and LIII) of M.A.R. Kayaks Lda., Portugal, which are among the fastest frontline kayaks. The effect of kayak design transformation on kayak hydrodynamics performance was studied by the application of computational fluid dynamics (CFD). The steady-state CFD simulations where performed by application of the k-omega turbulent model and the volume-of-fluid method to obtain two-phase flow around the kayaks. The numerical result of viscous, pressure drag, and coefficients along with wave drag at individual average race velocities was obtained. At an average velocity of 4.5 m/s, the reduction in drag was 29.4% for the design change from LI to LII and 15.4% for the change from LII to LIII, thus demonstrating and reaffirming a progressive evolution in design. In addition, the knowledge of drag hydrodynamics presented in the current study facilitates the estimation of the paddling effort required from the athlete during progression at different race velocities. This study finds an application during selection and training, where a coach can select the kayak with better hydrodynamics.info:eu-repo/semantics/publishedVersio

Influence of the Biomass Gasification Processes on the Final Composition of Syngas

AbstractInterest in the technology of gasification has shown a number of ups and downs since its first appearance. It appears that interest in gasification research correlates closely with the relative cost and availability of liquid and gaseous fossil fuels. Gasification is a versatile thermo-chemical conversion process which produces a gas mixture of H2, CO and CH4 the proportions being determined by the use of air, oxygen or steam as oxidizer, with a concomitant range of heat values, low (4–6MJ/Nm3), medium (12–18MJ/Nm3) and high (40MJ/Nm3). A variety of biomass gasifiers have been developed. Differentiation is based on the means of supporting the biomass in the reactor vessel, the direction of flow of both the biomass and oxidant, and the way heat is supplied to the reactor. Gases formed by gasification are contaminated by some constituents such as particles, alkali metals, nitrogen components, tars, sulfurs and chlorides. The level of contamination varies, depending on the gasification process and the feedstock. Gas cleaning must be applied to prevent erosion, corrosion and environmental problems in downstream equipment. In this work, a global perspective about the producer gas final composition dependence, the so-called syngas, from the biomass, oxidizer, reactor type, temperature and pressure is given based on a literature benchmarking. This study shows that there are some discrepancies in the values given by various authors. This highlights the strong dependence of the syngas final composition from the biomass conditions, type of gasifier and pressure and temperature of the process. Thus, in order to make precise studies on the use of syngas it will be necessary to consider that its composition will be rather constant. The development of mathematical models for numerical simulation fully validated experimentally are strongly desirable and may be a very useful tool to determine the final composition of syngas by changes in initial conditions without laborious and expensive experimental tests

The Computational Fluid Dynamics Study of Orientation Effects of Oar Blade

The distribution of pressure coefficient formed when the fluid contacts with the kayak oar blade is not been studied extensively. The CFD technique was employed to calculate pressure coefficient distribution on the front and rear faces of oar blade resulting from the numerical resolution equations of the flow around the oar blade in the steady flow conditions (4 m/s) for three angular orientations of the oar (45°, 90°, 135°) with main flow. A three-dimensional (3D) geometric model of oar blade was modeled and the k-ε turbulent model was applied to compute the flow around the oar. The main results reported that, under steady state flow conditions, the drag coefficient (Cd = 2.01 for 4 m/s) at 90° orientation has the similar evolution for the different oar blade orientation to the direction of the flow. This is valid when the orientation of the blade is perpendicular to the direction of the flow. Results indicated that the angle of oar strongly influenced the Cd with maximum values for 90° angle of the oar. Moreover, the distribution of the pressure is different for the internal and external edges depending upon oar angle. Finally, the difference of negative pressure coefficient Cp in the rear side and the positive Cp in the front side, contributes toward propulsive force. The results indicate that CFD can be considered an interesting new approach for pressure coefficient calculation on kayak oar blade. The CFD approach could be a useful tool to evaluate the effects of different blade designs on the oar forces and consequently on the boat propulsion contributing toward the design improvement in future oar models. The dependence of variation of pressure coefficient on the angular position of oar with respect to flow direction gives valuable dynamic information, which can be used during training for kayak competition.info:eu-repo/semantics/publishedVersio

Analysis of wind velocity and release angle effects on discus throw using computational fluid dynamics

The aim of this paper is to study the aerodynamics of discus throw. A comparison of numerical and experimental performance of discus throw with and without rotation was carried out using the analysis of lift and drag coefficients. Initial velocity corresponding to variation angle of around 35.5° was simulated. Boundary condition, on the top and bottom boundary edges of computational domain, was imposed in order to eliminate external influences on the discus; a wind resistance was calculated for the velocity values of 25 and 27 m/s. The results indicate that the flight distance (D) was strongly affected by the drag coefficient, the initial velocity, the release angle and the direction of wind velocity. It was observed that these variables change as a function of discus rotation. In this study, results indicate a good agreement of D between experimental values and numerical results.info:eu-repo/semantics/publishedVersio