5,236 research outputs found
Recommended from our members
Active noise control on high frequency narrow band dental drill noise: Preliminary results
Dental drills produce a characteristic noise that is uncomfortable for patients and is also known to be harmful to dentists under prolonged exposure. It is therefore desirable to protect the patient and dentist whilst allowing two-way communication. A solution is to use a combination of the three main noise cancellation methods, namely, Passive Noise Control, Adaptive Filtering and Active Noise Control. Dental drill noise occurs at very high frequency ranges in relation to conventional ANC, typically 2kHz to 6kHz and it has a narrow band characteristic due to the direct relation of the noise to the rotational speed of the bearing. This paper presents a design of an experimental rig where first applications of ANC on dental drill noise are executed using the standard filtered reference Least Mean Square (FXLMS) algorithm. The secondary path is kept as simple as possible, due to the high frequency range of interest, and hence is chosen as the space between headphone loudspeaker and error microphone placed in the ear (input of the headphone loudspeaker and the output of the error microphone). A standard headphone loudspeaker is used for the control source and the microphone inside of an “Ear and Cheek Simulator Type 43AG” is used as the error microphone. The secondary path transfer function is obtained and preliminary results of the application of ANC are discussed
Recommended from our members
Dental drill noise reduction using a combination of active noise control, passive noise control and adaptive filtering
Dental drills produce a characteristic high frequency, narrow band noise that is uncomfortable for patients and is also known to be harmful to dentists under prolonged exposure. It is therefore desirable to protect the patient and dentist whilst allowing two-way communication. A solution is to use a combination of the three main noise control methods, namely, Passive Noise Control (PNC), Adaptive Filtering (AF) and Active Noise Control (ANC). This paper discusses the application of the three methods to reduce dental drill noise while allowing two-way communication. Experimental setup for measuring the noise reduction by PNC is explained and results from different headphones and headphone types are presented. The implementation and results of an AF system using the Least Mean Square (LMS) algorithm are shown. ANC requires a modification of the LMS algorithm due to the introduction of the electro-acoustical cancellation path transfer function to compensate for the delays introduced by the control system. Therefore a cancellation path transfer function modeling method based on the filtered reference LMS (FXLMS) algorithm is presented along with preliminary results of the implementation
Recommended from our members
Active noise control for high frequencies
There are many applications that can benefit from Active Noise Control (ANC) such as in aircraft cabins and air conditioning ducts, i.e. in situations where technology interferes with human hearing in a harmful way or disrupts communication. Headsets with analogue ANC circuits have been used in the armed forces for attenuating frequencies below 1 kHz, which when combined with passive filtering offers protection across the whole frequency range of human hearing. A dental surgery is also a noisy environment; in which dental drill noise is commonly off-putting for many patients and is believed to harm the dentist’s hearing over a long period of time. However, dealing with dental drill noise is a different proposition from the applications mentioned above as the frequency range of the peak amplitudes goes from approximately 1.5 kHz to 12 kHz, whereas conventional ANC applications consider a maximum of 1.5 kHz. This paper will review the application of ANC at low frequencies and justify an approach for dealing with dental noise using digital technologies at higher frequencies. The limits of current ANC technologies will be highlighted and the means of improving performance for this dental application will be explored. In particular, technicalities of implementing filtering algorithms on a Digital Signal Processor will be addressed
Recommended from our members
Real-time adaptive filtering of dental drill noise using a digital signal processor
The application of noise reduction methods requires the integration of acoustics engineering and digital signal processing, which is well served by a mechatronic approach as described in this paper. The Normalised Least Mean Square (NLMS) algorithm is implemented on the Texas Instruments TMS320C6713 DSK Digital Signal Processor (DSP) as an adaptive digital filter for dental drill noise. Blocks within the Matlab/Simulink Signal Processing Blockset and the Embedded Target for TI C6000 DSP family are used. A working model of the algorithm is then transferred to the Code Composer Studio (CCS), where the desired code can be linked and transferred to the target DSP. The experimental rig comprises a noise reference microphone, a microphone for the desired signal, the DSK and loudspeakers. Different load situations of the dental drill are considered as the noise characteristics change when the drill load changes. The result is that annoying drill noise peaks, which occur in a frequency range from 1.5 kHz to 10 kHz, are filtered out adaptively by the DSP. Additionally a schematic design for its implementation in a dentist’s surgery will also be presented
The brachistochrone problem in open quantum systems
Recently, the quantum brachistochrone problem is discussed in the literature
by using non-Hermitian Hamilton operators of different type. Here, it is
demonstrated that the passage time is tunable in realistic open quantum systems
due to the biorthogonality of the eigenfunctions of the non-Hermitian Hamilton
operator. As an example, the numerical results obtained by Bulgakov et al. for
the transmission through microwave cavities of different shape are analyzed
from the point of view of the brachistochrone problem. The passage time is
shortened in the crossover from the weak-coupling to the strong-coupling regime
where the resonance states overlap and many branch points (exceptional points)
in the complex plane exist. The effect can {\it not} be described in the
framework of standard quantum mechanics with Hermitian Hamilton operator and
consideration of matrix poles.Comment: 18 page
S-matrix theory for transmission through billiards in tight-binding approach
In the tight-binding approximation we consider multi-channel transmission
through a billiard coupled to leads. Following Dittes we derive the coupling
matrix, the scattering matrix and the effective Hamiltonian, but take into
account the energy restriction of the conductance band. The complex eigenvalues
of the effective Hamiltonian define the poles of the scattering matrix. For
some simple cases, we present exact values for the poles. We derive also the
condition for the appearance of double poles.Comment: 29 pages, 9 figures, submitted to J. Phys. A: Math. and Ge
Magnetic excitations in multiferroic LuMnO3 studied by inelastic neutron scattering
We present data on the magnetic and magneto-elastic coupling in the hexagonal
multiferroic manganite LuMnO3 from inelastic neutron scattering, magnetization
and thermal expansion measurements. We measured the magnon dispersion along the
main symmetry directions and used this data to determine the principal exchange
parameters from a spin-wave model. An analysis of the magnetic anisotropy in
terms of the crystal field acting on the Mn is presented. We compare the
results for LuMnO3 with data on other hexagonal RMnO3 compounds.Comment: 7 pages, 8 figures, typo correcte
- …