170 research outputs found

    Rheological behavior of polymer/carbon nanotube composites: an overview

    Get PDF
    This paper reviews the current achievements regarding the rheological behavior of polymer-based nanocomposites containing carbon nanotubes (CNTs). These systems have been the subject of a very large number of scientific investigations in the last decades, due to the outstanding characteristics of CNTs that have allowed the formulation of nanostructured polymer-based materials with superior properties. However, the exploitation of the theoretical nanocomposite properties is strictly dependent on the complete dispersion of CNTs within the host matrix and on the consequent development of a huge interfacial region. In this context, a deep knowledge of the rheological behavior of CNT-containing systems is of fundamental importance, since the evaluation of the material’s viscoelastic properties allows the gaining of fundamental information as far as the microstructure of nanofilled polymers is concerned. More specifically, the understanding of the rheological response of polymer/CNT nanocomposites reveals important details about the characteristics of the interface and the extent of interaction between the two components, hence allowing the optimization of the final properties in the resulting nanocomposites. As the literature contains plenty of reviews concerning the rheological behavior of polymer/CNT nanocomposites, this review paper will summarize the most significant thermoplastic matrices in terms of availability and relevant industrial applications

    FDM Printability of PLA Based-Materials: The Key Role of the Rheological Behavior

    Get PDF
    Fused deposition modeling (FDM) is one of the most commonly used commercial technologies of materials extrusion-based additive manufacturing (AM), used for obtaining 3D-printed parts using thermoplastic polymers. Notwithstanding the great variety of applications for FDM-printed objects, the choice of materials suitable for processing using AM technology is still limited, likely due to the lack of rapid screening procedures allowing for an efficient selection of processable polymer-based formulations. In this work, the rheological behavior of several 3D-printable, commercially available poly(lactic acid)-based filaments was accurately characterized. In particular, each step of a typical FDM process was addressed, from the melt flowability through the printing nozzle, to the interlayer adhesion in the post-deposition stage, evaluating the ability of the considered materials to fulfill the criteria for successful 3D printing using FDM technology. Furthermore, the rheological features of the investigated materials were related to their composition and microstructure. Although an exhaustive and accurate evaluation of the 3D printability of thermoplastics must also consider their thermal behavior, the methodology proposed in this work aimed to offer a useful tool for designing thermoplastic-based formulations that are able to ensure an appropriate rheological performance in obtaining 3D-printed parts with the desired geometry and final properties

    Effect of the elongational flow on mechanical properties and thermal conductivity of polypropylene-boron nitride composite fibers

    Get PDF
    Polypropylene-based composites containing high loadings (up to 30 wt.%) of boron nitride (BN) were produced through melt compounding and then subjected to uniaxial elongational flow. The mechanical characterization of the obtained fibres indicated a progressive increase of their tensile properties with increasing the draw ratio. Furthermore, composites fibres exhibited enhanced thermal conductivity as compared to their isotropic counterparts. These results were ascribed to the effectiveness on the elongational flow in improving the filler dispersion; in fact, SEM observations pointed out the achievement of a more homogeneous morphology for the composites fibers, with the disappearance of BN agglomerates observed in the isotropic materials and some preferential orientation of the embedded fillers along the flow direction

    PLA-PHB polymer blends: study on processing conditions and influence of compatibilizers

    Get PDF
    In the recent years, the concerns related to the environmental issues stimulated an increasing interest towards the application of biodegradable polymers. However, the use of these renewable resources, in alternative to the conventional petrochemical derived products, has some disadvantages such as limited thermo-mechanical properties. A possible and effective method to overcome some biopolymers limitations is the development of bio-based polymer blends

    Miscibility, rheological and thermo-mechanical properties of compatible biopolymer blends: influence of process parameters and natural surfactants

    Get PDF
    In the recent years, a growing interest in biodegradable plastics as an alternative to the conventional fossil fuel-based polymeric materials was developed. Particularly, PLA is broadly applicable for use as an alternative to petrochemical- derived products. In fact, this polymer is biodegradable and biocompatible and its properties are very similar to those of some synthetic fossil fuel-based polymers. Nevertheless, the range of application of PLA is limited due to its fragility, poor barrier properties and the limited temperature range at which it can be used. Various strategies were proposed to overcome these limitations, such as modifying the chemical structure of the polymer with plasticizers or blending with other polymers. In this work a polylactic acid PLA (70 wt%) and poly- hydroxy butyrate PHB (30 wt%) blend was prepared to obtain a bioplastic with mechanical properties intermediate between those of the two polymers. Specifically, the aims of the work were improve the miscibility of the blend and increase the thermo-mechanical properties. Two different approaches were used to achieve these goals: the study of the influence of process parameters and the introduction of natural compatibilizers in the blend. For the first, a co-rotating twin screw extruder LEISTRITZ ZSE 18/40D (Φ = 18 mm, L/D = 40) was used with three different screw profiles. The investigated formulations were: unfilled PLA/PHB blend and containing 5 wt% of an organo-modified clay (Cloisite 5). In the second part two types of natural surfactants with different chemical structure were used: an ethylene oxide/propylene oxide block copolymer (Synperonic) in the form of flakes and a mixture of two liquid surfactants with a variable lipophilic–hydrophilic index (HLB 12). In this case, PLA/PHB blends were prepared using a DSM Explore twin screw mini-extruder (T=180◦C and screw speed=100 RPM). The investigated formulations were: PLA/PHB with HLB12 ranging from 0.1 wt% to 5 wt% and PLA/PHB with Synperonic in the same range of content. Morphological, thermo-mechanical and rheological analyses were performed on each formulation in both case studies. Firstly, a correlation between the observed morphology and the screw profile was found; in particular, the milder screw profile was the best solution. This result is supported by rheological analyses: an increase of the storage modulus (G’) was obtained after the adding of Cloisite, while the unfilled PLA/PHB blend exhibits a shoulder in the G’ curve caused by the relaxation of the dispersed phase which is in form of droplets, showing the typical rheological response of an immiscible blend. In the second part of the study, the morphological and the rheological analyses showed that HLB 12 was more effective than Synperonic. In fact, the trend of G’ in this last formulation was similar to that of the uncompatibilized blend. Conversely, samples containing HLB 12 showed a different trend of G’ curve and a decrease of the curve slope in the terminal region can be observed, as well. This behaviour can be attributed to the obtainment of a complex morphology, significantly different from that of the neat blend PLA/PHB. Nevertheless, while for HLB 12 system, it was necessary the use of a solvent for their introduction into the extruder, the Synperonic presents the advantage of introducing a solid additive during the process. As far as the thermo-mechanical analyses are concerned, both types of compatibilizers induced excellent mechanical properties at high temperatures, resulting in an increased HDT value that allows to widen the application range of the obtained materials

    Towards effective upcycling of polyolefines

    Get PDF

    Rheology, Morphology and Thermal Properties of a PLA/PHB/Clay Blend Nanocomposite: The Influence of Process Parameters

    Get PDF
    AbstractThe effect of process parameters on the final properties of a poly-lactic acid (PLA) and polyhydroxybutyrate (PHB) polymer blend filled with nanoclays was evaluated. To this aim, the nanofilled blend was processed in a co-rotating twin screw extruder, considering three different screw profiles and different values of the screw rotation speed, and the thermal and thermo-mechanical properties of the so-obtained materials were investigated. Furthermore, XRD analyses, SEM observations and rheological characterization were exploited to infer the coupled effect of the process parameters and nanoclay presence on the microstructure of the filled blend. Preliminary thermodynamic calculations allowed predicting the preferential localization of the nanoclay in the interfacial region between the polymeric phases. The relaxation mechanism of the particles of the dispersed phase in nanofilled blend processed, by rheological measurements, is not fully completed due to an interaction between polymer ad filler in the interfacial region with a consequent modification of the blend morphology and, specifically, a development of an enhanced microstructure. Therefore, by varying the screw configuration, particularly the presence of backflow and distribution elements in the screw profile, high shear stresses are induced during the processing able to allow a better interaction between polymers and clay. This finding also occurs in the thermo-mechanical properties of material, as an improvement of storage modulus up to 20% in filled blend processed with a specific screw profile. Otherwise, the microstructure of filled blend processed with different screw speed is similar, according to the other characterizations where no remarkable alterations of materials were detected
    • …
    corecore