45,770 research outputs found
Endurance testing of downstream cathodes on a low-power MPD thruster
A low-power MPD thruster with downstream cathode was tested for endurance with a series of hollow cathode designs. Failure modes and failure mechanisms were identified. A new hollow cathode (with rod inserts) has emerged which shows promise for long life. The downstream positioning of the cathode was also changed from an on-axis location to an off-axis location. Data are presented for a 1332-hour life test of this new hollow cathode located at the new off-axis location. Xenon propellant was used
Universal binding energy relations in metallic adhesion
Rose, Smith, and Ferrante have discovered scaling relations which map the adhesive binding energy calculated by Ferrante and Smith onto a single universal binding energy curve. These binding energies are calculated for all combinations of Al(111), Zn(0001), Mg(0001), and Na(110) in contact. The scaling involves normalizing the energy by the maximum binding energy and normalizing distances by a suitable combination of Thomas-Fermi screening lengths. Rose et al. have also found that the calculated cohesive energies of K, Ba, Cu, Mo, and Sm scale by similar simple relations, suggesting the universal relation may be more general than for the simple free electron metals for which it was derived. In addition, the scaling length was defined more generally in order to relate it to measurable physical properties. Further this universality can be extended to chemisorption. A simple and yet quite accurate prediction of a zero temperature equation of state (volume as a function of pressure for metals and alloys) is presented. Thermal expansion coefficients and melting temperatures are predicted by simple, analytic expressions, and results compare favorably with experiment for a broad range of metals
Universal binding energy relations in metallic adhesion
Scaling relations which map metallic adhesive binding energy onto a single universal binding energy curve are discussed in relation to adhesion, friction, and wear in metals. The scaling involved normalizing the energy to the maximum binding energy and normalizing distances by a suitable combination of Thomas-Fermi screening lengths. The universal curve was found to be accurately represented by E*(A*)= -(1+beta A) exp (-Beta A*) where E* is the normalized binding energy, A* is the normalized separation, and beta is the normalized decay constant. The calculated cohesive energies of potassium, barium, copper, molybdenum, and samarium were also found to scale by similar relations, suggesting that the universal relation may be more general than for the simple free electron metals
One hundred angstrom niobium wire
Composite of fine niobium wires in copper is used to study the size and proximity effects of a superconductor in a normal matrix. The niobium rod was drawn to a 100 angstrom diameter wire on a copper tubing
Hydrogen Generation Catalyzed by Fluorinated Diglyoxime−Iron Complexes at Low Overpotentials
Fe^(II) complexes containing the fluorinated ligand 1,2-bis(perfluorophenyl)ethane-1,2-dionedioxime (dAr^FgH_2; H = dissociable proton) exhibit relatively positive Fe^(II/I) reduction potentials. The air-stable difluoroborated species [(dAr^FgBF_2)_2Fe(py)_2] (2) electrocatalyzes H_2 generation at −0.9 V vs SCE with i_(cat)/i_p ≈ 4, corresponding to a turnover frequency (TOF) of ~ 20 s^(–1) [Faradaic yield (FY) = 82 ± 13%]. The corresponding monofluoroborated, proton-bridged complex [(dArFg2H-BF2)Fe(py)2] (3) exhibits an improved TOF of ~ 200 s^(–1) (i_(cat)/i_p ≈ 8; FY = 68 ± 14%) at −0.8 V with an overpotential of 300 mV. Simulations of the electrocatalytic cyclic voltammograms of 2 suggest rate-limiting protonation of an Fe“0” intermediate (k_(RLS) ≈ 200 M^(–1) s^(–1)) that undergoes hydride protonation to form H_2. Complex 3 likely reacts via protonation of an Fe^I intermediate that subsequently forms H_2 via a bimetallic mechanism (k_(RLS) ≈ 2000 M^(–1) s^(–1)). 3 catalyzes production at relatively positive potentials compared with other iron complexes
Temperature effects on the universal equation of state of solids
Recently it has been argued based on theoretical calculations and experimental data that there is a universal form for the equation of state of solids. This observation was restricted to the range of temperatures and pressures such that there are no phase transitions. The use of this universal relation to estimate pressure-volume relations (i.e., isotherms) required three input parameters at each fixed temperature. It is shown that for many solids the input data needed to predict high temperature thermodynamical properties can be dramatically reduced. In particular, only four numbers are needed: (1) the zero pressure (P=0) isothermal bulk modulus; (2)it P=0 pressure derivative; (3) the P=0 volume; and (4) the P=0 thermal expansion; all evaluated at a single (reference) temperature. Explicit predictions are made for the high temperature isotherms, the thermal expansion as a function of temperature, and the temperature variation of the isothermal bulk modulus and its pressure derivative. These predictions are tested using experimental data for three representative solids: gold, sodium chloride, and xenon. Good agreement between theory and experiment is found
Universality in the compressive behavior of solids
It was discovered that the isothermal equation of state for solids in compression is a simple, universal form. This single form accurately describes the pressure and bulk modulus as a function of volume for tonic, metallic, covalent, and rare gas solids
Wave propagation in stepped and joined shells Annual report, 1 Sep. 1968 - 1 Sep. 1969
Shell impact response and wave propagation in cylindrical and conical shells by experimental and analytical method
- …