The Deformation of Expanded Clay Syntactic Foams during Compression Characterized by Acoustic Emission

The deformation and failure mechanisms in syntactic foams with different metal matrices were investigated in this study. The syntactic foams were produced by the infiltration method using lightweight expanded clay particles (LECA) as a space holder and commercially pure Al or eutectic Al-12%Si alloy for the matrices. The samples were compressed at room temperature; simultaneously, the acoustic emission (AE) response and the surface deformation were monitored and collated with the deformation curves. In the case of the Al foam, ductile behavior with long plateau stress was observed. During this plateau regime, multiple active shear bands were detected. In contrast, the AlSi12 foam exhibited more brittle deformation behavior. At the end of the quasi-linear stage, the localization of the strain started within one large shear band, accompanied by a significant stress drop. The AE analysis revealed that the deformation was mostly governed by the fracture of LECA particles and the plastic deformation of the matrix material for both types of foams. After strain localization, in the case of the AlSi12 foam, the fracture of the matrix became significant, causing the deterioration of the sample. As for the Al foam, besides the fracture of the LECA particles, the plastic deformation of the matrix played an important role in preventing the foam from falling apart

A delphi study on health in future India

PIP: A delphi study was conducted to identify or envision health scenarios in India by the year 2000. Questionnaires consisting of 48 questions on 5 areas (diagnosis and therapy; family planning; pharmaceuticals and drugs; biochemical and biomedical research; health services) were mailed to 250 experts in India. 36 responded. Results were compiled and mailed back to the respondents for changes and comments. 17 people responded. Results of the delphi study shows that policy decisions with respect to compulsory family planning as well as health education at secondary school level will precede further breakthroughs in birth control technology. Non operation reversible sterilization procedures, immunological birth control, Ayurvedic medicines for contraception and abortion, and selection of baby's sex are all possible by 2000 thereafter. Complete eradication of infectious diseases, malnutrition and associated diseases is considered unlikely before 2000, as are advances in biomedical research. Changes in health services (e.g., significant increases in hospital beds and doctors, cheap bulk drugs), particularly in rural areas, are imminent, leading to prolonging of life expectancy to 70 years. Genetic engineering may provide significant breakthroughs in the prevention of malignancies and cardiac disorders. The India delphi study is patterned after a similar delphi study conducted in the U.S. by Smith, Kline and French (SKF) Laboratories in 1968. The SKF study was able to predict some breakthroughs with basic research which have been realized

Structure property studies of fibres from various parts of the coconut tree

Fibres from different structural parts of the coconut palm tree (Cocos nucifera, linn.)13; have been examined for properties such as size, density, electrical resistivity, ultimate fracture mode, microfibrillar angle as well as cellulose and lignin contents of these fibres have been determined. The observed properties have been related to the internal structure and chemical composition of the fibres. Some potential uses of these fibres have been listed

Mechanical properties of banana fibres (Musa sepientum)

The stress-strain curve for banana fibre i s determined. Properties such as the initial13; modulus (YM), ultimate tensile strength (UTS) and percentage elongation are evaluated as13; a function of fibre diameter, test length and speed of testing. It is found that YM, UTS13; and % elongation show l i t t l e variation in their values for fibres of diameter ranging from13; 50 to 250pm. The UTS and breaking strain are found to decrease with an increase in the13; test length while both breaking strength and breaking strain remain constant with the13; increase of speed of testing from 0.5 to 100 x m and after they both decrease. These observed properties are explained on the basis of the internal structure of the fibre, namely, the number of cells, spiral angle and the number of defects. Scanning electron microscopic (SEM) studies of the fractured surfaces of these fibres indiacte that the failure is due to pull-out of microfibrils panied by tearing of cell walls; the tendency for fibre pull-out seems to decrease with increasing speed of testing

Technological-forecasting and research inputs in area of birth-control technology

Technological forecasting, defined as quantified probabilistic prediction of timings and degree of change in the technological parameters, capabilities desirability or needs at different times in the future, is applied to birth control technology (BCT) as a means of revealing the paths of most promising research through identifying the necessary points for breakthroughs. The present status of BCT in the areas of pills and the IUD, male contraceptives, immumological approaches, post-coital pills, abortion, sterilization, luteolytic agents, laser technologies, and control of the sex of the child, are each summarized and evaluated in turn. Fine mapping is done to identify the most potentially promising areas of BCT. These include efforts to make oral contraception easier, improvement of the design of the IUD, clinical evaluation of the male contraceptive danazol, the effecting of biochemical changes in the seminal fluid, and researching of immunological approaches and the effects of other new drugs such as prostaglandins. The areas that require immediate and large research inputs are oral contraception and the IUD. On the basis of population and technological forecasts, it is deduced that research efforts could most effectively aid countries like India through the immediate production of an oral contraceptive pill or IUD with long-lasting effects. Development of a pill for males or an immunization against pre gnancy would also have a significant impact. However, the major impediment to birth control programs to date is attitudes, which must be changed through education