L edge X ray absorption study of mononuclear vanadium complexes and spectral predictions using a restricted open shell configuration interaction ansatz

A series of mononuclear V^(V), V^(IV) and V^(III) complexes were investigated by V L-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The spectra show significant sensitivity to the vanadium oxidation state and the coordination environment surrounding the vanadium center. The L-edge spectra are interpreted with the aid of the recently developed Density Functional Theory/Restricted Open Shell Configuration Interaction Singles (DFT/ROCIS) method. This method is calibrated for the prediction of vanadium L-edges with different hybrid density functionals and basis sets. For the B3LYP/def2-TZVP(-f) and BHLYP/def2-TZVP(-f) functional/basis-set combinations, good to excellent agreement between calculated and experimental spectra is obtained. A treatment of the spin–orbit coupling interaction to all orders is achieved by quasi-degenerate perturbation theory (QDPT), in conjunction with DFT/ROCIS for the calculation of the molecular multiplets while accounting for dynamic correlation and anisotropic covalency. The physical origin of the observed spectral features is discussed qualitatively and quantitatively in terms of spin multiplicities, magnetic sublevels and individual 2p to 3d core level excitations. This investigation is an important prerequisite for future applications of the DFT/ROCIS method to vanadium L-edge absorption spectroscopy and vanadium-based heterogeneous catalysts

In-depth mesocrystal formation analysis of microwave-assisted synthesis of LiMnPO4nanostructures in organic solution

In the present work, we report on the preparation of LiMnPO4 (lithiophilite) nanorods and mesocrystals composed of self-assembled rod subunits employing microwave-assisted precipitation with processing times on the time scale of minutes. Starting from metal salt precursors and H3PO4 as phosphate source, single-phase LiMnPO4 powders with grain sizes of approx. 35 and 65 nm with varying morphologies were obtained by tailoring the synthesis conditions using rac-1-phenylethanol as solvent. The mesocrystal formation, microstructure and phase composition were determined by electron microscopy, nitrogen physisorption, X-ray diffraction (including Rietveld refinement), dynamic light scattering, X-ray absorption and X-ray photoelectron spectroscopy, and other techniques. In addition, we investigated the formed organic matter by gas chromatography coupled with mass spectrometry in order to gain a deeper understanding of the dissolution\u2013precipitation process. Also, we demonstrate that the obtained LiMnPO4 nanocrystals can be redispersed in polar solvents such as ethanol and dimethylformamide and are suitable as building blocks for the fabrication of nanofibers via electrospinning

Spin orbit coupling for molecular ab initio density matrix renormalization group calculations: Application to g-tensors

Spin Orbit Coupling (SOC) is introduced to molecular ab initio density matrix renormalization group (DMRG) calculations. In the presented scheme, one first approximates the electronic ground state and a number of excited states of the Born-Oppenheimer (BO) Hamiltonian with the aid of the DMRG algorithm. Owing to the spin-adaptation of the algorithm, the total spin S is a good quantum number for these states. After the non-relativistic DMRG calculation is finished, all magnetic sublevels of the calculated states are constructed explicitly, and the SOC operator is expanded in the resulting basis. To this end, spin orbit coupled energies and wavefunctions are obtained as eigenvalues and eigenfunctions of the full Hamiltonian matrix which is composed of the SOC operator matrix and the BO Hamiltonian matrix. This treatment corresponds to a quasi-degenerate perturbation theory approach and can be regarded as the molecular equivalent to atomic Russell-Saunders coupling. For the evaluation of SOC matrix elements, the full Breit-Pauli SOC Hamiltonian is approximated by the widely used spin-orbit mean field operator. This operator allows for an efficient use of the second quantized triplet replacement operators that are readily generated during the non-relativistic DMRG algorithm, together with the Wigner-Eckart theorem. With a set of spin-orbit coupled wavefunctions at hand, the molecular g-tensors are calculated following the scheme proposed by Gerloch and McMeeking. It interprets the effective molecular g-values as the slope of the energy difference between the lowest Kramers pair with respect to the strength of the applied magnetic field. Test calculations on a chemically relevant Mo complex demonstrate the capabilities of the presented method

Active Space Selection Based on Natural Orbital Occupation Numbers from n-Electron Valence Perturbation Theory

Efficient and robust approximations to the full configuration interaction (full-CI) method such as the density matrix renormalization group (DMRG) and the full-CI quantum Monte Carlo (FCIQMC) algorithm allow for multiconfigurational self-consistent field (MC-SCF) calculations of molecules with many strongly correlated electrons. This opens up the possibility to treat large and complex systems that were previously untractable, but at the same time it calls for an efficient and reliable active space selection as the choice of how many electrons and orbitals enter the active space is critical for any multireference calculation. In this work we propose an Active Space Selection based on 1st order perturbation theory (ASS1ST) that follows a “bottom-up” strategy and utilizes a set of quasi-natural orbitals together with sensible thresholds for their occupation numbers. The required quasi-natural orbitals are generated by diagonalizing the virtual and internal part of the one-electron reduced density matrix that is obtained from strongly contracted n-electron valence perturbation theory (SC-NEVPT) on top of a minimal active space calculation. Self-consistent results can be obtained when the proposed selection scheme is applied iteratively. Initial applications on four chemically relevant benchmark systems indicate the capabilities of ASS1ST. Eventually, the strengths and limitations are critically discussed

Excited States of Large Open-Shell Molecules: An Efficient, General, and Spin-Adapted Approach Based on a Restricted Open-Shell Ground State Wave function

A spin-adapted configuration interaction with singles method that is based on a restricted open-shell reference function (ROCIS) with general total spin S is presented. All excited configuration state functions (CSFs) are generated with the aid of a spin-free second quantization formalism that only leads to CSFs within the first order interacting space. By virtue of the CSF construction, the formalism involves higher than singly excited determinants but not higher than singly excited configurations. Matrix elements between CSFs are evaluated on the basis of commutator relationships using a symbolic algebra program. The final equations were, however, hand-coded in order to maximize performance. The method can be applied to fairly large systems with more than 100 atoms in reasonable wall-clock times and also parallelizes well. Test calculations demonstrate that the approach is far superior to UHF-based configuration interaction with single excitations but necessarily falls somewhat short of quantitative accuracy due to the lack of dynamic correlation contributions. In order to implicitly account for dynamic correlation in a crude way, the program optionally allows for the use of Kohn–Sham orbitals in combination with a modest downscaling of two-electron integrals (DFT/ROCIS). All two-electron integrals of Kohn–Sham orbitals that appear in the Hamiltonian matrix are reduced by a total of three scaling parameters that are suitable for a wide range of molecules. Test calculations on open-shell organic radicals as well as transition metal complexes demonstrate the wide applicability of the method and its ability to calculate the electronic spectra of large molecular systems

Multireference Approaches to Spin‐State Energetics of Transition Metal Complexes Utilizing the Density Matrix Renormalization Group

The accurate and reliable calculation of different electronic states in transition metal systems is a persistent challenge for theoretical chemistry. The widespread use of density functional theory for computing the relative energies of states with different spin in transition metal complexes not only has not discouraged, but often, owing to its limitations, has motivated the development and refinement of first‐principles wavefunction–based methods, including both single‐reference and multireference approaches. A significant boost for the latter has been the emergence of the density matrix renormalization group (DMRG) as a reliable tool in applied quantum chemistry. By enabling the use of larger active spaces than conventionally possible, DMRG has opened up areas of transition metal chemistry that were previously inaccessible to multireference approaches. The present perspective provides an overview of representative studies that make use of DMRG methods and discusses recent applications to spin‐state energetics of transition metal systems. These range from mononuclear to exchange‐coupled systems that define an important emerging field of DMRG applications. Major achievements are highlighted and potential pitfalls are identified with a view toward future methodological developments as well as extensions in the applicability of DMRG‐based approaches to problems of spin‐state energetics and exchange‐coupling in transition metal chemistry

Homogeneously Catalyzed Electroreduction of Carbon Dioxide—Methods, Mechanisms, and Catalysts

The utilization of CO2 via electrochemical reduction constitutes a promising approach toward production of value-added chemicals or fuels using intermittent renewable energy sources. For this purpose, molecular electrocatalysts are frequently studied and the recent progress both in tuning of the catalytic properties and in mechanistic understanding is truly remarkable. While in earlier years research efforts were focused on complexes with rare metal centers such as Re, Ru, and Pd, the focus has recently shifted toward earth-abundant transition metals such as Mn, Fe, Co, and Ni. By application of appropriate ligands, these metals have been rendered more than competitive for CO2 reduction compared to the heavier homologues. In addition, the important roles of the second and outer coordination spheres in the catalytic processes have become apparent, and metal–ligand cooperativity has recently become a well-established tool for further tuning of the catalytic behavior. Surprising advances have also been made with very simple organocatalysts, although the mechanisms behind their reactivity are not yet entirely understood. Herein, the developments of the last three decades in electrocatalytic CO2 reduction with homogeneous catalysts are reviewed. A discussion of the underlying mechanistic principles is included along with a treatment of the experimental and computational techniques for mechanistic studies and catalyst benchmarking. Important catalyst families are discussed in detail with regard to mechanistic aspects, and recent advances in the field are highlighted

A projected approximation to strongly contracted N-electron valence perturbation theory for DMRG wavefunctions

A novel approach to strongly contracted N-electron valence perturbation theory (SC-NEVPT2) as a means of describing dynamic electron correlation for quantum chemical density matrix renormalization group (DMRG) calculations is presented. In this approach the strongly contracted perturber functions are projected onto a renormalized Hilbert space. Compared to a straightforward implementation of SC-NEVPT2 with DMRG wavefunctions, the computational scaling and storage requirements are reduced. This favorable scaling opens up the possibility of calculations with larger active spaces. A specially designed renormalization scheme ensures that both the electronic ground state and the perturber functions are well represented in the renormalized Hilbert space. Test calculations on the N2 and [Cu2O2(en)2]2+ demonstrate some key properties of the method and indicate its capabilities

A combined DFT and restricted open-shell configuration interaction method including spin-orbit coupling: Application to transition metal L-edge X-ray absorption spectroscopy

A novel restricted-open-shell configuration interaction with singles (ROCIS) approach for the calculation of transition metal L-edge X-ray absorption spectra is introduced. In this method, one first calculates the ground state and a number of excited states of the non-relativistic Hamiltonian. By construction, the total spin is a good quantum number in each of these states. For a ground state with total spin S excited states with spin S′ = S, S − 1, and S + 1 are constructed. Using Wigner-Eckart algebra, all magnetic sublevels with MS = S, …, −S for each multiplet of spin S are obtained. The spin-orbit operator is represented by a mean-field approximation to the full Breit-Pauli spin-orbit operator and is diagonalized over this N-particle basis. This is equivalent to a quasi-degenerate treatment of the spin-orbit interaction to all orders. Importantly, the excitation space spans all of the molecular multiplets that arise from the atomic Russell-Saunders terms. Hence, the method represents a rigorous first-principles approach to the complicated low-symmetry molecular multiplet problem met in L-edge X-ray absorption spectroscopy. In order to gain computational efficiency, as well as additional accuracy, the excitation space is restricted to single excitations and the configuration interaction matrix is slightly parameterized in order to account for dynamic correlation effects in an average way. To this end, it is advantageous to employ Kohn-Sham rather than Hartree-Fock orbitals thus defining the density functional theory/ROCIS method. However, the method can also be used in an entirely non-empirical fashion. Only three global empirical parameters are introduced and have been determined here for future application of the method to any system containing any transition metal. The three parameters were carefully calibrated using the L-edge X-ray absorption spectroscopy spectra of a test set of coordination complexes containing first row transition metals. These parameters are universal and transferable. Hence, there are no adjustable parameters that are used to fit experimental X-ray absorption spectra. Thus, the new approach classifies as a predictive first-principles method rather than an analysis tool. A series of calculations on transition metal compounds containing Cu, Ti, Fe, and Ni in various oxidation and spin states is investigated and a detailed comparison to experimental data is reported. In most cases, the approach yields good to excellent agreement with experiment. In addition, the origin of the observed spectral features is discussed in terms of the electronic structure of the investigated compounds