56 research outputs found
Open and Flexible Embedded System Applied to Positioning and Telecontrol
This paper presents the development and testing of
an open and flexible embedded system applied to positioning and
telecontrol (OFESAPO) for outdoor applications. The system is
composed of a control center (CC) and a set of remote terminal
units (RTUs); the International Electrotechnical Commission
(IEC) 60870-5 series has been chosen for communication among
them. This is a standard protocol of real-time telecontrol applications.
The CC is a personal computer, and the RTUs are
based on open hardware and software. The RTU hardware is an
embedded system, i.e., a system-on-chip-type design using fieldprogrammable
gate array that has been programmed with the
open-core LEON running Linux operating system. For prototyping,
the GR-XC3S-1500 board has been used. As there is no open
source code available for the IEC standard protocols, an open
source code has also been implemented. Hence, both the hardware
and the software are open source in OFESAPO. Several tests have
been made to show the system’s limitations and the suitability for
real-time applications. A prototype has also been tested in a real
environment, where the real position of two moving RTUs was
shown by a CC using Google Map.Junta de Andalucía p08-TIC-363
Simulación de un protocolo de nivel mac basado en IEEE 802.16 para el laboratorio de arquitectura de redes I
Este trabajo presenta nuestra experiencia en el desarrollo de una herramienta de simulación de
protocolos de nivel MAC basados en el estándar IEEE 802.16 [1]. El empleo de esta herramienta en el
laboratorio ayuda a los alumnos en el estudio y comprensión de protocolos de redes de última milla.
En particular, se ha definido un protocolo de nivel MAC para sistemas PLC outdoor que sigue algunas
de las descripciones para el protocolo MAN wireless descrito en la norma IEEE 802.16
Fingerprint indoor position system based on OpenMAC
This paper presents a work in progress for the developing of a fingerprint indoor position system based on
OpenMAC, an IEEE 802.15.4 embedded software implementation from Atmel to be used in different
scenarios like e_health, ambient living or smart building. The system is thought to work as another one that
we have yet developed but using the BitCloud Stack, a full-featured, second generation embedded software
stack from the same supplier, but improving it. The first steps followed up in the system development are
shown in this paper.Junta de Andalucía p08-TIC-363
The IEC-60870-5 standard for a personal server applied to telemedicine
This paper presents a proposal of a flexible telemedicine
system for remote patient monitoring. It can be used in
different kind of environments where there is only available low
speed transmission links like Radio Frequency. This proposal
includes the use of a previous work where the IEC-60870-S
standard was applied to the development of an open and flexible
RTU (Remote Terminal Unit) based in open hardware, a SoCtype
design using a FPGA programmed with the open core LEON
and open source, so both the hardware and the ISO are open
source.Junta de Andalucía p08-TIC-363
Upgrading of Traditional Electric Meter Into Wireless Electric Meter Using ZigBee Technology
Since the electric generating, distributing and marketing has been
possible; the Electric Meter was introduced and developed along the years, but
never like this time. The digital technology, the wireless communication, and
the computer systems have dramatically changed the Electric meter generation
from Traditional Meter to Automatic Meter and now to Smart Meter. Their
differences lie in how to collect and process information, and the amount of
information they can provide. Even so the traditional meter reading has been
long used, and it is still one of the most common ways for meter reading. This
method, however, has their disadvantages which are the result of human basis
reading method that uses. If the reading problem is solved by adding a simple
circuit, which makes it automatic it will be still useful method of reading. In
this paper it is described a prototype for Automatic Meter Reading (AMR)
system that uses a Traditional meter, ZigBee modules, and Mesh network. As
result the system gives, full capability of automatic meter even some features of
smart meter too. This experiment has an important result for developing country
like Ethiopia, which almost 99% its meters are the Traditional meter
Estudio de mercado para la comercialización de limón pérsico en el departamento de San Miguel año 2006
Los productores de limón pérsico, forman parte de la actividad económica de nuestro país; en la zona oriental existen muchos productores que se dedican a ésta actividad, así como la empresa FRUTOR S.A. DE C.V., los cuales carecen de un estudio de mercado para mejorar la comercialización del limón pérsico. El propósito de la investigación es formular una propuesta de diseño de un plan de comercialización para incrementar la demanda del limón pérsico en el departamento de San Miguel. Para la realización de la investigación se utilizó el método probabilístico de muestreo aleatorio simple, realizando un cuestionario para productores y otro para consumidores, los cuales revelaron que el fruto tiene aceptación por parte de los consumidores de la ciudad migueleña. Con base en los resultados obtenidos de la investigación, se diseño una propuesta de diseño de plan de comercialización, en donde se proponen estrategias adecuadas a sus fines y la determinación del presupuesto, para los productore
Spanish adaptation of meaning-centered psychotherapy for participants with cancer: Study protocol of a randomized control Trial
Background: Meaning-Centered Psychotherapy (MCP) is effective in improving meaning in life, hope, optimism, self-efficacy, well-being, and quality of life, and in reducing stress in people with cancer. However, all the studies on the application of MCP in cancer patients have been carried out in Anglo-Saxon samples. Therefore, it is necessary to adapt and verify the efficacy of MCP in populations that speak languages other than English, such as Spanish. Moreover, to expand the data supporting the efficacy of MCP for cancer patients, it would be necessary to compare MCP to other active therapies such as Cognitive Behavioral Therapy (CBT). Methods: The aims of the proposed study are: the first objective is to verify the efficacy of the MCP intervention for Spanish participants with cancer in a randomized control trial (RCT) comparing it to CBT. The second objective is to analyze the feasibility and acceptance of MCP in Spanish participants with cancer. The third objective is to analyze whether the changes produced in the meaning in life dimensions (presence, search, comprehension, purpose, and mattering) will predict changes in anxiety, depression, quality of life, etc. Our research team adapted MCP for Spanish participants with cancer. This paper presents the study protocol. The study design consists of a two-arm RCT with two conditions: MCP and CBT, where participants will be randomized to one of the two groups. Eligible participants will be adults with stage I, II, and III cancer who were treated with curative intent and had completed their main medical treatment (surgery, radiotherapy, or chemotherapy). Participants will be assessed at pretreatment, post-treatment, and 6-month follow-up. The intention-to-treat principle will be used when analyzing data, using mixed-effects models with full information and maximum likelihood estimation. Discussion: This study will provide results that confirm the efficacy of the MCP in Spanish participants with cancer. Trial Registration: ClinicalTrials.gov; https://register.clinicaltrials.gov/prs/app/template/Home.vm?uid=U0005WS9&ts=4&sid=S000BOTT&cx=bvr2ue, identifier NCT0519734
Análisis de distintas metodologías de evaluación en prácticas de laboratorio en asignaturas de Redes de Computadores
En este artículo se presenta una comparativa entre
distintos esquemas de evaluación del alumnado en
las prácticas de laboratorio de Redes de
Computadores utilizados en los últimos años. Se
analizan tres esquemas distintos: 1) Evaluación
basada en memorias teóricas y cuestionarios
experimentales, 2) Evaluación práctica a práctica
basada en WebCT, 3) Evaluación final basada en
WebCT. Estos distintos sistemas persiguen como
objetivos aplicar técnicas de evaluación continua,
lograr un sistema de calificación individualizado
y, finalmente, homogeneizar las calificaciones
prácticas y teóricas. Se presenta un análisis de
cada uno de estos sistemas, en base al
cumplimiento o no de estos objetivos usándose,
para ello, los datos estadísticos de los seis últimos
cursos
- …