31,500 research outputs found
Investigation of electronic switches for analog and hybrid computation technical note no. 6
Analog switching circuits for analog and hybrid computer
Research summary
The final report for progress during the period from 15 Nov. 1988 to 14 Nov. 1991 is presented. Research on methods for analysis of sound propagation through the atmosphere and on results obtained from application of our methods are summarized. Ten written documents of NASA research are listed, and these include publications, manuscripts accepted, submitted, or in preparation for publication, and reports. Twelve presentations of results, either at scientific conferences or at research or technical organizations, since the start of the grant period are indicated. Names of organizations to which software produced under the grant was distributed are provided, and the current arrangement whereby the software is being distributed to the scientific community is also described. Finally, the names of seven graduate students who worked on NASA research and received Rensselaer degrees during the grant period, along with their current employers are given
Low-frequency sound propagation modeling over a locally-reacting boundary using the parabolic approximation
There is substantial interest in the analytical and numerical modeling of low-frequency, long-range atmospheric acoustic propagation. Ray-based models, because of frequency limitations, do not always give an adequate prediction of quantities such as sound pressure or intensity levels. However, the parabolic approximation method, widely used in ocean acoustics, and often more accurate than ray models for lower frequencies of interest, can be applied to acoustic propagation in the atmosphere. Modifications of an existing implicit finite-difference implementation for computing solutions to the parabolic approximation are discussed. A locally-reacting boundary is used together with a one-parameter impedance model. Intensity calculations are performed for a number of flow resistivity values in both quiescent and windy atmospheres. Variations in the value of this parameter are shown to have substantial effects on the spatial variation of the acoustic signal
Applicability of 100kWe-class of space reactor power systems to NASA manned space station missions
An assessment is made of a manned space station operating with sufficiently high power demands to require a multihundred kilowatt range electrical power system. The nuclear reactor is a competitor for supplying this power level. Load levels were selected at 150kWe and 300kWe. Interactions among the reactor electrical power system, the manned space station, the space transportation system, and the mission were evaluated. The reactor shield and the conversion equipment were assumed to be in different positions with respect to the station; on board, tethered, and on a free flyer platform. Mission analyses showed that the free flyer concept resulted in unacceptable costs and technical problems. The tethered reactor providing power to an electrolyzer for regenerative fuel cells on the space station, results in a minimum weight shield and can be designed to release the reactor power section so that it moves to a high altitude orbit where the decay period is at least 300 years. Placing the reactor on the station, on a structural boom is an attractive design, but heavier than the long tethered reactor design because of the shield weight for manned activity near the reactor
Passive and active seismic isolation for gravitational radiation detectors and other instruments
Some new passive and active methods for reducing the effects of seismic disturbances on suspended masses are described, with special reference to gravitational radiation detectors in which differential horizontal motions of two or more suspended test masses are monitored. In these methods it is important to be able to determine horizontal seismic accelerations independent of tilts of the ground. Measurement of changes in inclination of the suspension wire of a test mass, relative to a direction defined by a reference arm of long period of oscillation, makes it possible to carry this out over the frequency range of interest for earth-based gravitational radiation detectors. The signal obtained can then be used to compensate for the effects of seismic disturbances on the test mass if necessary. Alternatively the signal corresponding to horizontal acceleration can be used to move the point from which the test mass is suspended in such a way as to reduce the effect of the seismic disturbance and also damp pendulum motions of the suspended test mass. Experimental work with an active anti-seismic system of this type is described
Numerical analysis of flow non-uniformity in the hot gas manifold of the Space Shuttle main engine
Three-dimensional viscous flow in a conceptual hot gas manifold (HGM) for the Space Shuttle Main Engine High Pressure Fuel Turbopump (SSME HPFTP) was numerically analyzed. A finite difference scheme was used to solve the Navier-Stokes equations. The exact geometry of the SSME HGM was modeled using boundary fitted curvilinear coordinates and the General Interpolants Method (GIM) code. Slight compressibility of the subsonic flow was modeled using a linearized equation of state with artificial compressibility. A time relaxation method was used to obtain a steady state solution. The feasibility and potential usefulness of computational methods in assisting the design of SSME components which involves the flow of fluids within complex geometrical shapes is demonstrated
The Angular Diameter and Fundamental Parameters of Sirius A
The Sydney University Stellar Interferometer (SUSI) has been used to make a
new determination of the angular diameter of Sirius A. The observations were
made at an effective wavelength of 694.1 nm and the new value for the
limb-darkened angular diameter is 6.048 +/- 0.040mas (+/-0.66%). This new
result is compared with previous measurements and is found to be in excellent
agreement with a conventionally calibrated measurement made with the European
Southern Observatory's Very Large Telescope Interferometer (VLTI) at 2.176
microns (but not with a second globally calibrated VLTI measurement). A
weighted mean of the SUSI and first VLTI results gives the limb-darkened
angular diameter of Sirius A as 6.041 +/- 0.017mas (+/-0.28%). Combination with
the Hipparcos parallax gives the radius equal to 1.713 +/- 0.009R_sun. The
bolometric flux has been determined from published photometry and
spectrophotometry and, combined with the angular diameter, yields the emergent
flux at the stellar surface equal to (5.32+/- 0.14)x10^8 Wm^-2 and the
effective temperature equal to 9845 +/- 64 K. The luminosity is 24.7 +/- 0.7
L_sun.Comment: Accepted for publication in PAS
High field CdS detector for infrared radiation
New and highly sensitive method of detecting infrared irradiation makes possible solid state infrared detector which is more sensitive near room temperature than usual photoconductive low band gap semiconductor devices. Reconfiguration of high field domains in cadmium sulphide crystals provides basis for discovery
A study of the optimization of ethylene production in a tubular reactor
The pyrolysis of ethane is a complex reaction involving six individual reactions in a reactant mixture of thirteen components. It is further complicated by the deposition of carbon along the reactor walls. The carbon buildup eventually necessitates reactor shutdown, During the intermediate stages the reactor experiences a gradual increase in inlet pressure which affects the reaction conditions, Optimum temperature profiles exist because the yield goes up with increasing temperature, but, consequently, the reactor must be shut down and cleaned out with increasing frequency. The combined effect causes the yearly production of ethylene to go through an optimum.
To find this optimum a computer program was developed with the ability of handling 25 simultaneous reactions involving up to 25 components, It calculates the carbon deposition profile and the changing pressure profiles, as a function of a predetermined reaction gas temperature profile. The reactor will remain in production until the inlet pressure exceeds eight atmospheres. The average yearly production rate is calculated, assessing a reactor shut down penalty of 24 and 48 hours required for the cleaning of the clogged pyrolysis tubes.
The optimum exit temperature for the 24 hour penalty was 1127°K with a corresponding 57% one pass ethane conversion. The 48 hour penalty lowers the optimum exit temperature to 1124°K and a 50.5% ethane conversion.
The practice of increasing pressure to compensate for carbon buildup results in accelerated carbon deposition and is detrimental to overall production scheme.
The program given here is immediately applicable to any plug flow system, the only additional requirement being the physical and thermodynamic constants for the additional components. The program could, for example, be used to calculate the production of acetylene
- …