Time resolved scanning Kerr microscopy of flux beam formation in hard disk write heads

This is the author accepted manuscript. The final version is available from the publisher via the DOI in this record.The underlying research dataset supporting this publication is available under a Creative Commons Attribution-ShareAlike 4.0 International License (https://creativecommons. org/licenses/by-sa/4.0/) and can be publicly accessed in Open Research Exeter via the following persistent identifier: http://hdl.handle.net/10871/21108.To meet growing data storage needs, the density of data stored on hard disk drives must increase. In pursuit of this aim the magnetodynamics of the hard disk write head must be characterized and understood, particularly the process of “flux beaming”. In this study, seven different configurations of perpendicular magnetic recording (PMR) write heads were imaged using time-resolved scanning Kerr microscopy, revealing their detailed dynamic magnetic state during the write process. It was found that the precise position and number of driving coils can significantly alter the formation of flux beams during the write process. These results are applicable to the design and understanding of current PMR and next-generation heat-assisted magnetic recording (HAMR) devices, as well as being relevant to other magnetic devices.The authors gratefully acknowledge financial support from the Seagate Plan

Effect of sink layer thickness on damping in CoMnGe (5 nm) / Ag (6 nm) / NiFe (x nm) spin valves

Poster presented at Magnetism 4 – 5 April 2016, Sheffield.In spin valve structures the damping of a ferromagnetic layer driven at resonance can be modified by the transfer of spin angular momentum into a ‘sink’ ferromagnetic layer. This effect, known as spin pumping, is interface dominated and expected to increase with increasing sink layer thickness up to a saturation absorption depth, previously reported to be 1.2 nm regardless of the sink layer’s composition [1]. Using vector network analyser ferromagnetic resonance (VNA-FMR), we have studied the variation in damping as a function of sink layer thickness in a series of CoMnGe (5 nm) / Ag (6 nm) / NiFe (x nm) spin valves. These measurements show only small variations in the CoMnGe Gilbert damping parameter for x ≤ 1.8 nm, although damping is observed to increase at x = 0.3 and 0.6 nm. Element-resolved x-ray detected ferromagnetic resonance (XFMR) [2] measurements confirm spin transfer torque due to spin pumping as the origin of the damping for x = 1.5 and 1.8 nm, with both thicknesses having the same effective spin mixing conductance, supporting the findings of Ghosh et al [1]. For thicker sink layers the source and sink FMR fields are seen to coincide, hampering the identification of spin pumping. [1] A Ghosh, et al. Physical Review Letters 109, 127202 (2012) [2] M Marcham, et al. Physical Review B 87, 180403 (2013)We thank the Advanced Light Source for access to beamlines 4.0.2 and 6.3.1 (ALS-06433, ALS-07116). The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.We thank Diamond Light Source for access to beamlines I06 and I10 (SI8782, SI11585, SI13063) that contributed to the results presented here.This work was supported by the Engineering and Physical Sciences Research Council [grant number EP/J018767/1]

Time-resolved scanning Kerr microscopy of flux beam formation in hard disk write heads (dataset)

Data behind the published paper "Time-resolved scanning Kerr microscopy of flux beam formation in hard disk write heads"Seagate Technology PL