11 research outputs found

    Data reduction for the MIPS far-infrared arrays

    Get PDF
    Traditional photoconductive detectors are used at 70 and 160 microns in the Multiband Imaging Photometer for SIRTF. These devices are highly sensitivity to cosmic rays and have complex response characteristics, all of which must be anticipated in the data reduction pipeline. The pipeline is being developed by a team at the SIRTF Science Center, where the detailed design and coding are carried out, and at Steward Observatory, where the high level algorithms are developed and detector tests are conducted to provide data for pipeline experiments. A number of innovations have been introduced. Burger's model is used to extrapolate to asymptotic values for the response of the detectors. This approach permits rapid fitting of the complexities in the detector response. Examples of successful and unsuccessful fits to the laboratory test data are shown

    Data reduction for the MIPS far-infrared arrays

    Get PDF
    Traditional photoconductive detectors are used at 70 and 160 microns in the Multiband Imaging Photometer for SIRTF. These devices are highly sensitivity to cosmic rays and have complex response characteristics, all of which must be anticipated in the data reduction pipeline. The pipeline is being developed by a team at the SIRTF Science Center, where the detailed design and coding are carried out, and at Steward Observatory, where the high level algorithms are developed and detector tests are conducted to provide data for pipeline experiments. A number of innovations have been introduced. Burger's model is used to extrapolate to asymptotic values for the response of the detectors. This approach permits rapid fitting of the complexities in the detector response. Examples of successful and unsuccessful fits to the laboratory test data are shown

    Performance of the multiband imaging photometer for SIRTF

    Get PDF
    We describe the test approaches and results for the Multiband Imaging Photometer for SIRTF. To verify the performance within a `faster, better, cheaper' budget required innovations in the test plan, such as heavy reliance on measurements with optical photons to determine instrument alignment, and use of an integrating sphere rather than a telescope to feed the completed instrument at its operating temperature. The tests of the completed instrument were conducted in a cryostat of unique design that allowed us to achieve the ultra-low background levels the instrument will encounter in space. We controlled the instrument through simulators of the mission operations control system and the SIRTF spacecraft electronics, and used cabling virtually identical to that which will be used in SIRTF. This realistic environment led to confidence in the ultimate operability of the instrument. The test philosophy allowed complete verification of the instrument performance and showed it to be similar to pre-integration predictions and to meet the instrument requirements

    On-orbit performance of the MIPS instrument

    Full text link
    The Multiband Imaging Photometer for Spitzer (MIPS) provides long wavelength capability for the mission, in imaging bands at 24, 70, and 160 microns and measurements of spectral energy distributions between 52 and 100 microns at a spectral resolution of about 7%. By using true detector arrays in each band, it provides both critical sampling of the Spitzer point spread function and relatively large imaging fields of view, allowing for substantial advances in sensitivity, angular resolution, and efficiency of areal coverage compared with previous space far-infrared capabilities. The Si:As BIB 24 micron array has excellent photometric properties, and measurements with rms relative errors of 1% or better can be obtained. The two longer wavelength arrays use Ge:Ga detectors with poor photometric stability. However, the use of 1.) a scan mirror to modulate the signals rapidly on these arrays, 2.) a system of on-board stimulators used for a relative calibration approximately every two minutes, and 3.) specialized reduction software result in good photometry with these arrays also, with rms relative errors of less than 10%

    Reduction and calibration of the MIPS 70 and 160 micron detectors

    No full text
    The Multiband Imaging Photometer for SIRTF (MIPS) will be one of the three instruments on the Space Infrared Telescope Facility (SIRTF). MIPS will produce images at 24 (128x128 pixels), 70 (32x32 pixels), and 160 (2x20 pixels) microns using Si:As (24 micron) and Ge:Ga (70 and 160 microns) based detectors. The reduction and calibration of the Ge:Ga images present special challenges due to the nature of the bulk photoconductive detectors. The observing strategy of MIPS has been specifically designed to make the reduction and calibration of the Ge:Ga images quite robust and is different from that employed by the Infrared Space Observatory (ISO). The observations are carried out in the fast not the slow time domain, i.e. sources do not stay on the same detector pixels between exposures (3, 4, or 10 seconds). In addition, all data are taken with a high degree of redundancy and a flat field is taken every 2 minutes. The repeatability of this flat field is better than 1%. Worst case source flux repeatability of 10-15% has also been demonstrated. The general outline of the Ge:Ga data reduction and calibration will be presented. This includes continuing characterization work in the laboratory with flight-like arrays which allows for the ongoing study of the behavior of Ge:Ga detectors

    Reduction and calibration of the MIPS 70 and 160 micron detectors

    No full text
    The Multiband Imaging Photometer for SIRTF (MIPS) will be one of the three instruments on the Space Infrared Telescope Facility (SIRTF). MIPS will produce images at 24 (128x128 pixels), 70 (32x32 pixels), and 160 (2x20 pixels) microns using Si:As (24 micron) and Ge:Ga (70 and 160 microns) based detectors. The reduction and calibration of the Ge:Ga images present special challenges due to the nature of the bulk photoconductive detectors. The observing strategy of MIPS has been specifically designed to make the reduction and calibration of the Ge:Ga images quite robust and is different from that employed by the Infrared Space Observatory (ISO). The observations are carried out in the fast not the slow time domain, i.e. sources do not stay on the same detector pixels between exposures (3, 4, or 10 seconds). In addition, all data are taken with a high degree of redundancy and a flat field is taken every 2 minutes. The repeatability of this flat field is better than 1%. Worst case source flux repeatability of 10-15% has also been demonstrated. The general outline of the Ge:Ga data reduction and calibration will be presented. This includes continuing characterization work in the laboratory with flight-like arrays which allows for the ongoing study of the behavior of Ge:Ga detectors

    The Guaranteed Time Program with the Multiband Imaging Photometer for SIRTF (MIPS)

    No full text
    The GTO program for the MIPS team is concentrated in two areas. First, the evolution of planetary debris disks will be traced from their formation at less than one million years old, to the stable disks around old stars. To do so, we will make maps from 3 to 200 microns (in collaboration with the IRAC team) of regions where young stars are forming, to characterize thoroughly the circumstellar excess emission. We will include clusters representing a range of density and age. We will also observe a selection of isolated evolved stars in the MIPS photometric bands at 24, 70, and 160 microns. These observations will catalog the debris disk excesses as a function of stellar mass, age, binarity, and the presence of planetary companions. Second, we will explore the evolution of infrared galaxies and AGNs. This program has two components. In collaboration with both the IRAC and IRS teams, we will map at moderate depth 9 square degrees of sky, and in collaboration with IRAC will make deeper maps of about 2 square degrees. The latter regions have been selected to overlap with very deep xray surveys to aid in identification of AGNs and study of their evolution. We will extend the results of the deep maps by observations of 18 massive galaxy clusters in the redshift range 0.2 < z < 0.4. These clusters will image about 50 square arcmin of the background Universe, raising sources out of the confusion that will limit the sensitivity of the other deep surveys

    The guaranteed time program with the multiband imaging photometer for SIRTF (MIPS)

    No full text
    The GTO program for the MIPS team is concentrated in two areas. First, the evolution of planetary debris disks will be traced from their formation at less than one million years old, to the stable disks around old stars. To do so, we will make maps from 3 to 200 microns (in collaboration with the IRAC team) of regions where young stars are forming, to characterize thoroughly the circumstellar excess emission. We will include clusters representing a range of density and age. We will also observe a selection of isolated evolved stars in the MIPS photometric bands at 24, 70, and 160 microns. These observations will catalog the debris disk excesses as a function of stellar mass, age, binarity, and the presence of planetary companions. Second, we will explore the evolution of infrared galaxies and AGNs. This program has two components. In collaboration with both the IRAC and IRS teams, we will map at moderate depth 9 square degrees of sky, and in collaboration with IRAC will make deeper maps of about 2 square degrees. The latter regions have been selected to overlap with very deep xray surveys to aid in identification of AGNs and study of their evolution. We will extend the results of the deep maps by observations of 18 massive galaxy clusters in the redshift range 0.2 < z < 0.4. These clusters will image about 50 square arcmin of the background Universe, raising sources out of the confusion that will limit the sensitivity of the other deep surveys
    corecore