Magnetic Levitation – Modelling, Identification and Open Loop Verification

The paper describes a procedure using the first principle modelling and experimental identification of the Magnetic Levitation Model CE 152. It is a modified version of the paper [1]. The difference is that the identification and verification is done in open loop and constraints logic is added in the current paper. The author optimized and simplified dynamic model to a minimum to what is needed to characterize given system for the simulation and control design purposes. Only few open-loop experiments are needed to estimate the unknown parameters. Model quality is verified in open loop where the real and simulated data are compared. The model can serve as a simulation model for some standard control algorithms or as a process model for advanced control method design

Municipal Building Regulations for Energy Efficiency in Southern Italy

The building sector is still one of the most energy consuming sectors in Italy, like developed countries in Europe. At European level, the main policy driver related to the energy use in buildings is the Energy Performance of Buildings Directive (EPBD, 2002/91/EC) and its recast. Through the EPBD in- troduction, requirements for certification, inspections, training or renovation are now imposed in Member States. In order to fulfill the expected changes, local regulations are a key factor aiming at sustainable territorial planning. It is thus required support the issue of local rules at municipal level in order to guide local administrators and technicians and to limit discretional power of bureaucracy. In this paper, a review of the most common practices for building regulations in Europe and in Italy is proposed, then the role and the framework of a municipal building regulation for the Southern European area accounting for sustainability features is discussed

Neural Markers of Opposite-Sex Bias in Face Processing

Some behavioral and neuroimaging studies suggest that adults prefer to view attractive faces of the opposite sex more than attractive faces of the same sex. However, unlike the other-race face effect (Caldara et al., 2004), little is known regarding the existence of an opposite-/same-sex bias in face processing. In this study, the faces of 130 attractive male and female adults were foveally presented to 40 heterosexual university students (20 men and 20 women) who were engaged in a secondary perceptual task (landscape detection). The automatic processing of face gender was investigated by recording ERPs from 128 scalp sites. Neural markers of opposite- vs. same-sex bias in face processing included larger and earlier centro–parietal N400s in response to faces of the opposite sex and a larger late positivity (LP) to same-sex faces. Analysis of intra-cortical neural generators (swLORETA) showed that facial processing-related (FG, BA37, BA20/21) and emotion-related brain areas (the right parahippocampal gyrus, BA35; uncus, BA36/38; and the cingulate gyrus, BA24) had higher activations in response to opposite- than same-sex faces. The results of this analysis, along with data obtained from ERP recordings, support the hypothesis that both genders process opposite-sex faces differently than same-sex faces. The data also suggest a hemispheric asymmetry in the processing of opposite-/same-sex faces, with the right hemisphere involved in processing same-sex faces and the left hemisphere involved in processing faces of the opposite sex. The data support previous literature suggesting a right lateralization for the representation of self-image and body awareness

Investigating energy saving potential in a big shopping center through ventilation control

This paper investigates energy saving measures for the ventilation system of large shopping centers. This kind of buildings is characterized by high yearly energy consumptions, because of the high level of operating hours and the frequent use of obsolete technologies. In the analyzed case studies, three big Do It Yourself (DIY) shops, located in Italy, are considered. Two different approaches are considered, they are aimed at reducing the annual energy consumption for the indoor air exchange of the sales area. The first considered retrofit solution consists in the installation of heat recovery exchangers, reducing the energy demand for the air thermal treatment without changing the airflow value. In the second scenario, smart air quality sensors are inputs for the modulation of the air exchange rate according to the actual requirement for indoor air quality. In a third scenario, the application of both retrofit solutions is considered. For each scenario, the paper reports the yearly energy savings, the avoided CO2 emissions and cost saving indicators. Furthermore, as the three shops are equipped with different heating systems and are located in different parts of Italy, a technological and climatic comparison is provided

Techno-Economic Analysis of Clean Hydrogen Production Plants in Sicily: Comparison of Distributed and Centralized Production

This paper presents an assessment of the levelized cost of clean hydrogen produced in Sicily, a region in Southern Italy particularly rich in renewable energy and where nearly 50% of Italy’s refineries are located, making a comparison between on-site production, that is, near the end users who will use the hydrogen, and centralized production, comparing the costs obtained by employing the two types of electrolyzers already commercially available. In the study for centralized production, the scale factor method was applied on the costs of electrolyzers, and the optimal transport modes were considered based on the distance and amount of hydrogen to be transported. The results obtained indicate higher prices for hydrogen produced locally (from about 7 €/kg to 10 €/kg) and lower prices (from 2.66 €/kg to 5.80 €/kg) for hydrogen produced in centralized plants due to economies of scale and higher conversion efficiencies. How-ever, meeting the demand for clean hydrogen at minimal cost requires hydrogen distribution pipelines to transport it from centralized production sites to users, which currently do not exist in Sicily, as well as a significant amount of renewable energy ranging from 1.4 to 1.7 TWh per year to cover only 16% of refineries’ hydrogen needs

HIV-2 infection in a migrant from Gambia: the history of the disease combined with phylogenetic analysis revealed the real source of infection

Human immunodeficiency virus type 2 (HIV-2) infection prevalence is increasing in some European countries. The increasing migratory flow from countries where HIV-2 is endemic has facilitated the spread of the virus into Europe and other regions. We describe a case of HIV-2 infection in a migrant individual in the Asylum Seeker Centre (ASC) in Italy. The patient's virus was sequenced, and found to be a typical HIV-2 genotype A virus. Bayesian evolutionary analysis revealed that the HIV-2 sequence from migrant dated back to 1986 in a subcluster including sequences from Guinea Bissau. This was coherent with the migrant history who lived in Guinea Bissau from his birth until 1998 when he was 13 years old. Monitoring for HIV-2 infection in migrants from western Africa is necessary using adequate molecular tools to improve the diagnosis and understand the real origin of infection

Privacy and Transparency in Blockchain-based Smart Grid Operations

In the past few years, blockchain technology has emerged in numerous smart grid applications, enabling the construction of systems without the need for a trusted third party. Blockchain offers transparency, traceability, and accountability, which lets various energy management system functionalities be executed through smart contracts, such as monitoring, consumption analysis, and intelligent energy adaptation. Nevertheless, revealing sensitive energy consumption information could render users vulnerable to digital and physical assaults. This paper presents a novel method for achieving a dual balance between privacy and transparency, as well as accountability and verifiability. This equilibrium requires the incorporation of cryptographic tools like Secure Mul- tiparty Computation and Verifiable Secret Sharing within the distributed components of a multi- channel blockchain and its associated smart contracts. We corroborate the suggested architecture throughout the entire process of a Demand Response scenario, from the collection of energy data to the ultimate reward. To address our proposal’s constraints, we present countermeasures against accidental crashes and Byzantine behavior while ensuring that the solution remains appropriate for low-performance IoT devices

A hierarchical architecture for increasing efficiency of large photovoltaic plants under non-homogeneous solar irradiation

Under non-homogeneous solar irradiation, photovoltaic (PV) panels receive different solar irradiance, resulting in a decrease in efficiency of the PV generation system. There are a few technical options to fix this issue that goes under the name of mismatch. One of these is the reconfiguration of the PV generation system, namely changing the connections of the PV panels from the initial configuration to the optimal one. Such technique has been widely considered for small systems, due to the excessive number of required switches. In this paper, the authors propose a new method for increasing the efficiency of large PV systems under non-homogeneous solar irradiation using Series-Parallel (SP) topology. In the first part of the paper, the authors propose a method containing two key points: a switching matrix to change the connection of PV panels based on SP topology and the proof that the SP-based reconfiguration method can increase the efficiency of the photovoltaic system up to 50%. In the second part, the authors propose the extension of the method proposed in the first part to improve the efficiency of large solar generation systems by means of a two-levels architecture to minimize the cost of fabrication of the switching matrix

Analisi e definizione di strategie di gestione e controllo di sistemi di accumulo elettrico per applicazioni in reti di distribuzione attive automatizzate Report 1 – Analisi dello stato dell’arte

Il presente Report riferisce sui contenuti e sui risultati della prima fase delle attività svolte nell’ambito della ricerca dal titolo: “Analisi e definizione di strategie di gestione e controllo di sistemi di accumulo elettrico per applicazioni in reti di distribuzione attive automatizzate”, oggetto dell’Accordo di Collaborazione tra ENEA e DIEET sottoscritto nel corso del 2011. Nel corso della prima fase delle attività, a partire da un inquadramento generale dei diversi tipi di accumulo di energia elettrica (elettrochimico, meccanico ed elettrico), è stata condotta un’analisi preliminare su metodologie, sistemi d’interfaccia e tecniche di controllo dei sistemi di accumulo, in una visione il più possibile integrata con le esigenze “di sistema”, ovvero in relazione ai principali aspetti che nei prossimi anni caratterizzeranno il funzionamento delle reti di distribuzione e dei loro diversi componenti/sottosistemi, nell’ottica di transizione verso infrastrutture elettriche efficienti, flessibili, dinamiche ed interattive. Tra tali aspetti, in relazione al contesto generale della ricerca, è stato analizzato in particolare il possibile ruolo dei sistemi di accumulo per: - favorire l’integrazione di generazione di energia da fonti rinnovabili contribuendo a risolvere alcune criticità nei servizi di regolazione della tensione e della frequenza della rete; - contribuire ad elevare i livelli di qualità del servizio elettrico; - partecipare ad una gestione ottimale, in termini tecnico-economici, di tutte le risorse di rete: fonti energetiche, unità di accumulo e carichi (implementando idonei programmi di demand-response). Le attività sono state condotte in sinergia con il personale tecnico di ENEA e sono state svolte prevalentemente all’interno dei locali e dei laboratori del DIEET di Palermo