57 research outputs found

    Numerical predictions of the negative phase

    Get PDF
    The field of blast protective design emerged in the late 1940s and focussed mainly on large scale (nuclear) explosive loading massive structures. In these situations, positive phase effects were seen to dominate and the negative phase could effectively be ignored. Recently, however, the threat has moved to smaller scale explosives and increasingly lightweight structures. Here, the negative phase becomes important, however despite this the negative phase is often overlooked. This research presents a numerical investigation on the negative phase, with a primary focus on an accurate numerical scheme for modelling the negative phase blast pressure. Numerical tests are performed on deformable targets to determine fully reflected blast parameters, with associated numerical modelling conducted using Abaqus/Explicit. Moreover, the failure modes are obtained for light-weight panel employing the Perzyna model for metallic materials. The computational methods are adapted for better representation of the negative phase, including mesh refinement strategies, modelling of the explosive event and accurate description of the air behaviour. The results herein can be used to inform blast resistant designers on how to accurately model negative phase effects

    An investigation of TNT equivalence of hemispherical PE4 charges

    Get PDF
    The TNT equivalence of an explosive is given as the equivalent mass of TNT required to produce a blast wave of equal magnitude to that produced by a unit weight of the explosive in question. Currently, there is a lack of agreement in the literature on the TNT equivalence (TNTeq) of PE4. This paper presents a combined numerical and experimental investigation of TNTeq for hemispherical PE4 charges in far-field blast events. Experimental results are compared to a series of numerical analyses conducted with different masses of TNT explosive and conclusions are drawn in order to provide a more informed value of TNTeq. It is found that a TNTeq of 1.2 best describes the blast waves produced from PE4 detonations, and this factor is found to be invariant of the distance from the explosive when considering far-field events

    Theoretical analysis of the focusing of acoustic waves by two-dimensional sonic crystals

    Full text link
    Motivated by a recent experiment on acoustic lenses, we perform numerical calculations based on a multiple scattering technique to investigate the focusing of acoustic waves with sonic crystals formed by rigid cylinders in air. The focusing effects for crystals of various shapes are examined. The dependance of the focusing length on the filling factor is also studied. It is observed that both the shape and filling factor play a crucial role in controlling the focusing. Furthermore, the robustness of the focusing against disorders is studied. The results show that the sensitivity of the focusing behavior depends on the strength of positional disorders. The theoretical results compare favorably with the experimental observations, reported by Cervera, et al. (Phys. Rev. Lett. 88, 023902 (2002)).Comment: 8 figure

    Spin alignment of leading K∗(892)0K^{*}(892)^{0} mesons in hadronic Z0Z^0 decays

    Get PDF
    Helicity density matrix elements for inclusive K*(892)^0 mesons from hadronic Z^0 decays have been measured over the full range of K^*0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x_p values above 0.3, with the matrix element rho_00 rising to 0.66 +/- 0.11 for x_p > 0.7. The values of the real part of the off-diagonal element rho_1-1 are negative at large x_p, with a weighted average value of -0.09 +/- 0.03 for x_p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the qq(bar) system from the Z^0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x_p range. The K^*0 fragmentation function has also been measured and the total rate determined to be 0.74 +/- 0.02 +/- 0.02 K*(892)^0 mesons per hadronic Z^0 decay.Helicity density matrix elements for inclusive K*(892)^0 mesons from hadronic Z^0 decays have been measured over the full range of K^*0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x_p values above 0.3, with the matrix element rho_00 rising to 0.66 +/- 0.11 for x_p > 0.7. The values of the real part of the off-diagonal element rho_1-1 are negative at large x_p, with a weighted average value of -0.09 +/- 0.03 for x_p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the qq(bar) system from the Z^0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x_p range. The K^*0 fragmentation function has also been measured and the total rate determined to be 0.74 +/- 0.02 +/- 0.02 K*(892)^0 mesons per hadronic Z^0 decay.Helicity density matrix elements for inclusive K*(892)^0 mesons from hadronic Z^0 decays have been measured over the full range of K^*0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x_p values above 0.3, with the matrix element rho_00 rising to 0.66 +/- 0.11 for x_p > 0.7. The values of the real part of the off-diagonal element rho_1-1 are negative at large x_p, with a weighted average value of -0.09 +/- 0.03 for x_p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the qq(bar) system from the Z^0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x_p range. The K^*0 fragmentation function has also been measured and the total rate determined to be 0.74 +/- 0.02 +/- 0.02 K*(892)^0 mesons per hadronic Z^0 decay.Helicity density matrix elements for inclusive K*(892)^0 mesons from hadronic Z^0 decays have been measured over the full range of K^*0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x_p values above 0.3, with the matrix element rho_00 rising to 0.66 +/- 0.11 for x_p > 0.7. The values of the real part of the off-diagonal element rho_1-1 are negative at large x_p, with a weighted average value of -0.09 +/- 0.03 for x_p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the qq(bar) system from the Z^0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x_p range. The K^*0 fragmentation function has also been measured and the total rate determined to be 0.74 +/- 0.02 +/- 0.02 K*(892)^0 mesons per hadronic Z^0 decay.Helicity density matrix elements for inclusive K ∗ (892) 0 mesons from hadronic Z 0 decays have been measured over the full range of K ∗ 0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x p values above 0.3, with the matrix element ϱ 00 rising to 0.66 ± 0.11 for x p > 0.7. The values of the real part of the off-diagonal element ϱ 1 - 1 are negative at large x p , with a weighted average value of −0.09 ± 0.03 for x p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the q q system from the Z 0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x p range. The K ∗ 0 fragmentation function has also been measured and the total rate determined to be 0.74 ± 0.02 ± 0.02 K ∗ (892) 0 mesons per hadronic Z 0 decay

    Dimethyl fumarate in patients admitted to hospital with COVID-19 (RECOVERY): a randomised, controlled, open-label, platform trial

    Get PDF
    Dimethyl fumarate (DMF) inhibits inflammasome-mediated inflammation and has been proposed as a treatment for patients hospitalised with COVID-19. This randomised, controlled, open-label platform trial (Randomised Evaluation of COVID-19 Therapy [RECOVERY]), is assessing multiple treatments in patients hospitalised for COVID-19 (NCT04381936, ISRCTN50189673). In this assessment of DMF performed at 27 UK hospitals, adults were randomly allocated (1:1) to either usual standard of care alone or usual standard of care plus DMF. The primary outcome was clinical status on day 5 measured on a seven-point ordinal scale. Secondary outcomes were time to sustained improvement in clinical status, time to discharge, day 5 peripheral blood oxygenation, day 5 C-reactive protein, and improvement in day 10 clinical status. Between 2 March 2021 and 18 November 2021, 713 patients were enroled in the DMF evaluation, of whom 356 were randomly allocated to receive usual care plus DMF, and 357 to usual care alone. 95% of patients received corticosteroids as part of routine care. There was no evidence of a beneficial effect of DMF on clinical status at day 5 (common odds ratio of unfavourable outcome 1.12; 95% CI 0.86-1.47; p = 0.40). There was no significant effect of DMF on any secondary outcome

    Protein Engineers: Better than Nature, Faster than Evolution

    No full text
    • …
    corecore