Natural Immunomodulators Treat the Cytokine Storm in SARS-CoV-2

Recently, the world has been dealing with a destructive global pandemic Coronavirus disease 2019 (COVID-19) infection, since 2020; there were millions of infections and hundreds of thousands of deaths worldwide. With sequencing generations of the virus, around 60% are expected to become infected during the pandemic. Unfortunately, no drug or vaccine has been approved because no real evidence from clinical trials in treatment was reached. According to current thinking, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) mortality is caused by a cytokine storm syndrome in patients with hyper-inflammatory conditions, resulting in acute respiratory distress and finally death. In this review, we discuss the various types of natural immune-modulatory agents and their role in the management of SARS-CoV-2, and cytokine storm syndrome. For example, Polyphenols as natural products can block the binding of SARS-CoV-2 spike protein to host cell receptor ACE2, stop viral entry into the host cell and block viral RNA replication. Also, saikosaponins (A, B2, C, and D), triterpene glycosides, which are isolated from medicinal plants exert antiviral action against HCoV-22E9, and Houttuynia cordata water extract has antiviral effects on SARS-CoV. Moreover, eucalyptus oil has promising potential for COVID-19 prevention and treatment. There is an urgent need for research to improve the function of the human immune system all over the world. As a result, actions for better understanding and improving the human immune system are critical steps toward mitigating risks and negative outcomes. These approaches will be strongly recommended for future emerging viruses and pathogens

Immediate operation versus percutaneous drainage for treatment of appendicular absces

Aim: This study aims to compare the outcomes, morbidity and hospital stay in patients who underwent emergency surgery, and those who underwent percutaneous drainage for treatment of appendicular abscess. Patients and methods: From April 2013 to October 2014, we recruited 40 patients with appendicular abscesses for this study. These patients were randomized into two groups: group 1 (20 patients) for emergency surgery and group 2 (20 patients) for percutaneous drainage. Preoperative data, hospital stay, functional recovery and postoperative complications were analyzed. Results: Functional recovery was 2.2 ± 1 days in group 1 and 1 ± 0 day in group 2. Hospital stay in group 1 was 7.7 ± 3.5 days and in group 2 was 4 ± 1 days. Postoperative complications in group 1 were noted in 8 (40%) patients. No complications were recorded in group 2. Conclusions: Appendicular abscesses may be safely and effectively treated by US-guided percutaneous drainage with high technical and clinical success rates, low incidence of complications and shorter hospital stay

Friction Stir Spot Welding of Different Thickness Sheets of Aluminum Alloy AA6082-T6

Friction stir spot welding (FSSW) is one of the important variants of the friction stir welding (FSW) process. FSSW has been developed mainly for automotive applications where the different thickness sheets spot welding is essential. In the present work, different thin thickness sheets (1 mm and 2 mm) of AA6082-T6 were welded using FSSW at a constant dwell time of 3 s and different rotation speeds of 400, 600, 800, and 1000 rpm. The FSSW heat input was calculated, and the temperature cycle experience during the FSSW process was recorded. Both starting materials and produced FSSW joints were investigated by macro- and microstructural investigation, a hardness test, and a tensile shear test, and the fractured surfaces were examined using a scanning electron microscope (SEM). The macro examination showed that defect-free spot joints were produced at a wide range of rotation speeds (400–1000 rpm). The microstructural results in terms of grain refining of the stir zone (SZ) of the joints show good support for the mechanical properties of FSSW joints. It was found that the best welding condition was 600 rpm for achieving different thin sheet thicknesses spot joints with the SZ hardness of 95 ± 2 HV0.5 and a tensile shear load of 4300 ± 30 N

A Novel Friction Stir Deposition Technique to Refill Keyhole of Friction Stir Spot Welded AA6082-T6 Dissimilar Joints of Different Sheet Thicknesses

Joining dissimilar sheet thicknesses of AA6082-T6 alloys by friction stir spot welding (FSSW) provides many advantages in automotive and aerospace applications. The formed keyhole at the end of the FSSW process is one of the typical features after the welding process, which owns the same size as the rotating pin that remains at the joint center. This keyhole destroys the joint continuity and can stimulate serious stress concentration when the FSSW joint bears an external force. To solve this issue, a novel refilling technique was developed for the FSSW keyholes using a friction stir deposition (FSD) technique. The FSSW joints of AA6082-T6 sheets were welded at various rotation speeds from 400 to 1000 rpm and a constant dwell time of 3 s, where a 2 mm sheet thickness was an upper sheet, and a 1 mm sheet thickness was a lower sheet. All the keyhole refilling processes were achieved using a specially designed AA2011-T6 consumable rod to be used for friction stir deposition of continuous layers at a constant deposition parameter of 400 rpm consumable rod rotation speed and a 1 mm/min feed rate. The heat input energy for both the FSSW and refilled FSSW lap joints was calculated. In addition, the FSSW and the FSD temperatures were measured. Macrostructure, microstructure, and mechanical properties in terms of hardness and tensile shear maximum load were evaluated for both the friction stir spot welded (FSSWed) and the refilled FSSW lap joints. The obtained results showed that the keyhole could be successfully refilled with defect-free continuous multilayers after the refill friction stir spot welding (RFSSW) process. All the RFSSW lap joints showed higher tensile shear loads than that given by the FSSW (before refill) lap joints. The RFSSW joint (welded at 600 rpm/3 s and refilled at 400 rpm/1 mm/min) showed a higher tensile shear load of 5400 N ± 100 compared with that recorded by the unrefilled joint (4300 N ± 80). The fracture location and fracture surface of the FSSW and RFSSW were examined and discussed

Hydrogen storage in gas reservoirs: A molecular modeling and experimental investigation

Hydrogen is one of the clean energy sources that can be used instead of fossil fuel sources to reduce greenhouse emissions. However, hydrogen supply intermittency significantly reduces the deployment and reliability of this energy resource. Therefore, this work investigates the underground storage of hydrogen in depleted gas reservoirs to avoid seasonal fluctuations in hydrogen supply and assure long-term energy security. The obtained results from molecular simulation (Density Functional Theory) revealed hydrogen is adsorbed physically on calcite (104) and silica (001) surfaces on different adsorption configurations. This conclusion is supported by low adsorption energies (−0.14 eV for calcite and −0.09 for silica) and by Bader charge analysis, which showed no indication of charge transfer. The experimental results illustrated that hydrogen has a very low adsorption affinity toward carbonate and sandstone rocks in the temperature range of 50–100 °C and pressure up to 20 bar. These results show the potential of depleted gas reservoirs to store hydrogen for s is useful in hydrogen recovery as no hydrogen will be adsorbed to the rock surface of conventional gas reservoirs.The authors would like to acknowledge the Qatar National Research Fund (a member of Qatar Foundation) for funding through Grant # NPRP13S-1231-190009. Al-Salam Petroleum Services Company, Qatar, is also acknowledged for co-funding this project. The findings achieved herein are solely the responsibility of the authors. The authors would also like to acknowledge Qatar University for providing support.Scopu

A bilateral asymmetrical hip dislocation: A rare case report

Abstract A 17‐year‐old male was ejected from the motorcycle and brought to the Emergency Department with bilateral hip dislocation and absence of pelvic or femur fractures or sciatic nerve injury. Closed reduction and postreduction examination were performed with a bilateral stable full range of motion in all directions

Arbuscular mycorrhizal fungi as an effective approach to enhance the growth and metabolism of soybean plants under thallium (TI) toxicity

Abstract: Thallium (TI) is a toxic metal that can trigger harmful impacts on growth and metabolism of plants. Utilizing arbuscular mycorrhizal fungi (AMF) proves to be an effective strategy for alleviating heavy metal toxicity in plants. To this end, AMF were applied to mitigate TI toxic effects on the growth, primary and secondary metabolism of soybean plants. Here, TI stress inhibited the growth and photosynthetic parameters of soybean plants. It also increased the oxidative damage as demonstrated by increased levels of oxidative markers, (MDA and lipoxygenase (LOX) activity). However, AMF could mitigate the reduction in growth and photosynthesis induced by TI, as well as the induction of oxidative damage. To overcome TI toxicity, AMF increased the levels and metabolism of osmolytes such as proline in soybean plants. This was in line with the increased activities of key enzymes that involved in proline biosynthesis (e.g., P5CS (pyrroline-5-carboxylate synthetase), P5CR (pyr-roline-5-carboxylate reductase) and OAT (ornithine aminotransferase) under the AMF and/or TI treatments. Furthermore, soybean plants could benefit from the synergism between AMF and TI to enhance the contents of individual (e.g., spermine and spermidine) and total polyamines as well as their metabolic enzymes (e.g., arginine decarboxylase and ornithine decarboxylase). Overall, the combined application of AMF emerges as a viable approach for alleviating TI toxicity in soybean plants

Rhodospirillum sp. JY3 : an innovative tool to mitigate the phytotoxic impact of galaxolide on wheat (**Triticum aestivum**) and faba bean (**Vicia faba**) plants

To date, several studies have considered the phytotoxic impact of cosmetics and personal care products on crop plants. Nonetheless, data are scarce about the toxic impact of galaxolide [hexahydro-hexamethyl cyclopentabenzopyran (HHCB)] on the growth, physiology, and biochemistry of plants from different functional groups. To this end, the impact of HHCB on biomass, photosynthetic efficiency, antioxidant production, and detoxification metabolism of grass (wheat) and legume (faba bean) plants has been investigated. On the other hand, plant growth-promoting bacteria (PGPB) can be effectively applied to reduce HHCB phytotoxicity. HHCB significantly reduced the biomass accumulation and the photosynthetic machinery of both crops, but to more extent for wheat. This growth reduction was concomitant with induced oxidative damage and decreased antioxidant defense system. To mitigate HHCB toxicity, a bioactive strain of diazotrophic plant growth-promoting Rhodospirillum sp. JY3 was isolated from heavy metal-contaminated soil in Jazan, Kingdom of Saudi Arabia, and applied to both crops. Overall, Rhodospirillum mitigated HHCB-induced stress by differently modulating the oxidative burst [malondialdehyde (MDA), hydrogen peroxide (H(2)O(2)), and protein oxidation] in both wheat and faba beans. This alleviation was coincident with improvement in plant biomass and photosynthetic efficiency, particularly in wheat crops. Considering the antioxidant defense system, JY3 augmented the antioxidants in both wheat and faba beans and the detoxification metabolism under HHCB stress conditions. More interestingly, inoculation with JY3 further enhanced the tolerance level of both wheat and faba beans against contamination with HHCB via quenching the lignin metabolism. Overall, this study advanced our understanding of the physiological and biochemical mechanisms underlying HHCB stress and mitigating its impact using Rhodospirillum sp. JY3, which may strikingly reduce the environmental risks on agriculture sustainability

Efficacy and Effectiveness of SARS-CoV-2 Vaccines: A Systematic Review and Meta-Analysis

The coronavirus disease 2019 (COVID-19) pandemic has threatened global health and prompted the need for mass vaccination. We aimed to assess the efficacy and effectiveness of COVID-19 vaccines to prevent mortality and reduce the risk of developing severe disease after the 1st and 2nd doses. From conception to 28 June 2021, we searched PubMed, Cochrane, EBSCO, Scopus, ProQuest, Web of Science, WHO-ICTRP, and Google Scholar. We included both observational and randomized controlled trials. The pooled vaccine efficacy and effectiveness following vaccination, as well as their 95 percent confidence intervals (CI), were estimated using the random-effects model. In total, 22 of the 21,567 screened articles were eligible for quantitative analysis. Mortality 7 and 14 days after full vaccination decreased significantly among the vaccinated group compared to the unvaccinated group (OR = 0.10, ([95% CI, 0.04–0.27], I2 = 54%) and (OR = 0.46, [95% CI, 0.35–0.61], I2 = 0%), respectively. The probability of having severe disease one or two weeks after 2nd dose decreased significantly (OR = 0.29 [95% CI, 0.19–0.46], I2 = 25%) and (OR = 0.08 [95% CI, 0.03–0.25], I2 = 74%), respectively. The incidence of infection any time after the 1st and 2nd doses diminished significantly (OR = 0.14 [95% CI, 0.07–0.4], I2 = 100%) and (OR = 0.179 [95% CI, 0.15–0.19], I2 = 98%), respectively. Also, incidence of infection one week after 2nd dose decreased significantly, (OR = 0.04, [95% CI (0.01–0.2], I2 = 100%). After meta-regression, the type of vaccine and country were the main predictors of outcome [non-mRNA type, ß = 2.99, p = 0.0001; country UK, ß = −0.75, p = 0.038; country USA, ß = 0.8, p = 0.02]. This study showed that most vaccines have comparable effectiveness, and it is purported that mass vaccination may help to end this pandemic