Improving Fatigue Life of Bolt Adapter of Prosthetic SACH Foot

In this research an analysis for improving the fatigue behavior (safety factor of fatigue) of non- articular prosthetic foot (SACH) in the region (Bolt Adapter).The laser peening was carried to the fatigue specimens to improving the fatigue properties of bolt’s material. The tests of mechanical properties and fatigue behavior were carried for material that the bolt manufacture from it, a region where the failure occur and inserted of these properties to the program of engineering analysis (Ansys) to calculate the safety factor of fatigue. The results showed that the safety factor after hardening by laser is increased by 42.8%

Study the Mechanical Properties and Numerical Evaluation of Friction Stir Processing (FSP) for 6061-T6 Aluminum Alloys

Friction stir processing is a new method of changing the properties of a metal through intense, localized plastic deformation ,this process mixes the material without changing the phase (by melting or otherwise) and creates a micro structure with fine, equiaxedgrains, It is used to improve the micro structural properties of metals. In this paper , the enhancement of mechanical properties of friction stir welding specimens at variable rotation speeds (1100,1300 and 1500 rpm ) with constant feed speed(60 mm/min) for 6061-T6 aluminum alloy is studied by using the friction stir processing method at the same variable rotation speed and feed speed in order to transform a heterogeneous micro structure to a more homogeneous, refined micro structure. The best results of the weld gained at the parameter 60 mm/min weld speed and 1300 RPM rotation speed for the FSW and FSP where the efficiency reaches to 84.61% for FSW and 89.05% for FSP of the ultimate tensile strength of the parent metal .This research is developed a finite element simulation of friction stir processing (FSP) of 6061-T6 Aluminum alloy. Numerical simulations are developed for thermal conductivity, specific heat and density to know the relationship of these factors with peak temperature, The simulation model is tested with experimental results. The results of the simulation are in excellent comparison with the experimental results

Investigate the Microstructure and the Mechanical Properties of Ni-Ti-Cu Shape Memory Alloys

        Abstract      In this study a Nickel-Titanium-Cupper shape memory alloys was manufactured by powder metallurgy (PM) technique, powder mixture of 50% Ti , 47% Ni and 3% Cu was prepared by mixing for two hours and compacted in a press machine using various compacting pressure  (600, 700 and 800) MPa , sample was then sintered for 5 hrs in an electrical tube vacuum furnace using sintering temperature of (850˚C, 900˚C and 950˚C) .phase analysis of samples was conducted by X-ray diffraction test, the  effect of different sintering temperature and compacting pressure on the porosity, microhardness ,compression strength and the shape memory effect (SME) was studied, the result showed decrease in the porosity and increasing in the shape recovery ,compression strength and microhardness with increasing compacting pressure and at  lower sintering temperature  and hence the best results was at 800MPa compacting pressure and 850˚C sintering temperature

Effect of Temperature on Buckling of Composite Materials Column

A theoretical and experimental investigation pertaining to the buckling behavior of slender fiber reinforced polymer columns subjected to axial loading under varying temperatures (from room temperature to 50℃). Two groups of composite materials were used for manufacturing of test specimens, the first consist of perlon fiber as a reinforcement and acrylic resin as a bonding matrix, while the second consists of a combination of perlon and carbon fibers as reinforcement. The composite specimens were fabricated by vacuum molding technique and cut according to ASTM D-638 for conducting tensile test. The data from tensile test were used to calculate the effective slenderness ratio and defining the column as Euler buckling column. An experimental rig was designed, manufactured and calibrated to study the effect of thermal and buckling load subjected to columns. Numerical analyses pertaining the buckling behavior for both groups were conducted. The results show that the temperature has a considerable effect on properties of fiber reinforced polymer composites where the value of critical load and Young's Modules decrease with the increase of temperature for both groups. Perlon & Carbon reinforcement composites gave best mechanical properties, which make them the best candidate to improve the buckling resistance characteristics of composite materials