2,824 research outputs found
Measuring Relative Humidity in Concrete Pavements as a Method to Assess ASR Mitigation Measures
Alkali-silica reaction (ASR) in concrete is partly facilitated by available moisture within the concrete. In order to better understand this facilitation and to develop processes for ASR mitigation methods, it is necessary to establish a means of monitoring internal relative humidity (RH) within the concrete. Current procedures for measuring RH are time consuming; requiring several hours of equilibration time and specific external conditions to yield accurate results. In order to better understand RH monitoring, laboratory tests were conducted using commercially available RH probes and different controlled environments. Probes were carefully monitored and calibrated in controlled environments, and laboratory tests on internal RH were conducted on concrete slabs in ambient conditions as well as concrete prisms in controlled environments. Preliminary results show that differing probes must be calibrated at different intervals and require different equilibrium times. Current internal RH test procedures are inefficient in terms of equilibration and measurement parameters
Developing numerical libraries in Java
The rapid and widespread adoption of Java has created a demand for reliable
and reusable mathematical software components to support the growing number of
compute-intensive applications now under development, particularly in science
and engineering. In this paper we address practical issues of the Java language
and environment which have an effect on numerical library design and
development. Benchmarks which illustrate the current levels of performance of
key numerical kernels on a variety of Java platforms are presented. Finally, a
strategy for the development of a fundamental numerical toolkit for Java is
proposed and its current status is described.Comment: 11 pages. Revised version of paper presented to the 1998 ACM
Conference on Java for High Performance Network Computing. To appear in
Concurrency: Practice and Experienc
Acute complete heart block in dogs
A study has been conducted immediately and up to 18 days after the surgical production of complete heart block in dogs. Immediately after surgery cardiac output, coronary flow, and mean arterial pressure were reduced in rough proportion to the degree of bradycardia. In time, these measures began to return toward preoperative levels. Paralleling the diminished left ventricular work was a diminished left ventricular oxygen consumption with little consequent change in myocardial efficiency. Small rises were detected in central venous pressure. At autopsy, the only unequivocal abnormality was myocardial hypertrophy which became measurable between 2 and 18 days after operation
Lightening the Load: Perceptual Load Impairs Visual Detection in Typical Adults but Not in Autism
Autism spectrum disorder (ASD) research portrays a mixed picture of attentional abilities with demonstrations of enhancements (e.g., superior visual search) and deficits (e.g., higher distractibility). Here we test a potential resolution derived from the Load Theory of Attention (e.g., Lavie, 2005). In Load Theory, distractor processing depends on the perceptual load of the task and as such can only be eliminated under high load that engages full capacity. We hypothesize that ASD involves enhanced perceptual capacity, leading to the superior performance and increased distractor processing previously reported. Using a signal-detection paradigm, we test this directly and demonstrate that, under higher levels of load, perceptual sensitivity was reduced in typical adults but not in adults with ASD. These findings confirm our hypothesis and offer a promising solution to the previous discrepancies by suggesting that increased distractor processing in ASD results not from a filtering deficit but from enhanced perceptual capacity
Formation of Pillars at the Boundaries between H II Regions and Molecular Clouds
We investigate numerically the hydrodynamic instability of an ionization
front (IF) accelerating into a molecular cloud, with imposed initial
perturbations of different amplitudes. When the initial amplitude is small, the
imposed perturbation is completely stabilized and does not grow. When the
initial perturbation amplitude is large enough, roughly the ratio of the
initial amplitude to wavelength is greater than 0.02, portions of the IF
temporarily separate from the molecular cloud surface, locally decreasing the
ablation pressure. This causes the appearance of a large, warm HI region and
triggers nonlinear dynamics of the IF. The local difference of the ablation
pressure and acceleration enhances the appearance and growth of a multimode
perturbation. The stabilization usually seen at the IF in the linear regimes
does not work due to the mismatch of the modes of the perturbations at the
cloud surface and in density in HII region above the cloud surface. Molecular
pillars are observed in the late stages of the large amplitude perturbation
case. The velocity gradient in the pillars is in reasonably good agreement with
that observed in the Eagle Nebula. The initial perturbation is imposed in three
different ways: in density, in incident photon number flux, and in the surface
shape. All cases show both stabilization for a small initial perturbation and
large growth of the second harmonic by increasing amplitude of the initial
perturbation above a critical value.Comment: 21 pages, 8 figures, accepted for publication in ApJ. high resolution
figures available upon reques
Plastic Deformation in Laser-Induced Shock Compression of Monocrystalline Copper
Copper monocrystals were subjected to shock compression at pressures of 10–60 GPa by a short (3 ns initial) duration laser pulse. Transmission electron microscopy revealed features consistent with previous observations of shock-compressed copper, albeit at pulse durations in the µs regime. The results suggest that the defect structure is generated at the shock front. A mechanism for dislocation generation is presented, providing a realistic prediction of dislocation density as a function of pressure. The threshold stress for deformation twinning in shock compression is calculated from the constitutive equations for slip, twinning, and the Swegle-Grady relationship
Transient x-ray diffraction used to diagnose shock compressed Si crystals on the Nova laser
Transient x-ray diffraction is used to record time-resolved information about the shock compression of materials. This technique has been applied on Nova shock experiments driven using a hohlraum x-ray drive. Data were recorded from the shock release at the free surface of a Si crystal, as well as from Si at an embedded ablator/Si interface. Modeling has been done to simulate the diffraction data incorporating the strained crystal rocking curves and Bragg diffraction efficiencies. Examples of the data and post-processed simulations are presented
Striatal dopamine D2 receptor binding of risperidone in schizophrenic patients as assessed by 123I-iodobenzamide SPECT: a comparative study with olanzapine
The aim of this investigation was to compare the degree of striatal dopamine-(D2) receptor blockade by two atypical antipsychotic drugs, risperidone and olanzapine. The percentage of D2 receptor occupancy during treatment was calculated by comparing the results of 123I-iodobenzamide SPECT with those from healthy control subjects. Twenty inpatients suffering from schizophrenia or schizoaffective psychosis according to DSM IV/ICD-10 criteria were treated with clinically recommended doses of risperidone and compared with 13 inpatients treated with up to 20 mg olanzapine. Neuroleptic dose and D2 receptor blockade correlated strongly for both risperidone (Pearson r = –0.86, p = 0.0001) and olanzapine (Pearson r = –0.77, p = 0.002). There was no significant difference between the D2 receptor occupancy of the two substances when given in the clinically recommended dose range (unpaired t-test, t= –0.112, p=0.911)
A comparative study of Rayleigh-Taylor and Richtmyer-Meshkov instabilities in 2D and 3D in tantalum
Driving a shock wave through the interface between two materials with different densities can result in the Richtmyer-Meshkov or Rayleigh-Taylor instability and initial perturbations at the interface will grow. If the shock wave is sufficiently strong, the instability will lead to plastic flow at the interface. Material strength will reduce the amount of plastic flow and suppress growth. While such instabilities have been investigated in 2D, no studies of this phenomena have been performed in 3D on materials with strength.
Initial perturbations to seed the hydrodynamic instability were coined into tantalum recovery targets. Two types of perturbations were used, two dimensional (2D) perturbations (hill and valley) and three-dimensional (3D) perturbations (egg crate pattern). The targets were subjected to dynamic loading using the Janus laser at the Jupiter Laser Facility. Shock pressures ranged from 50 GPa up to 150 GPa and were calibrated using VISAR drive targets
- …