Interplay between phase defects and spin polarization in the specific heat of the spin density wave compound (TMTTF)_2Br in a magnetic field

Equilibrium heat relaxation experiments provide evidence that the ground state of the commensurate spin density wave (SDW) compound (TMTTF)$_2$Br after the application of a sufficient magnetic field is different from the conventional ground state. The experiments are interpreted on the basis of the local model of strong pinning as the deconfinement of soliton-antisoliton pairs triggered by the Zeeman coupling to spin degrees of freedom, resulting in a magnetic field induced density wave glass for the spin carrying phase configuration.Comment: 4 pages, 5 figure

Relaxation time spectrum of low-energy excitations in one- and two-dimensional materials with charge or spin density waves

The long-time thermal relaxation of (TMTTF)$_2$Br, Sr$_{14}$Cu$_{24}$O$_{41}$ and Sr$_2$Ca$_{12}$Cu$_{24}$O$_{41}$ single crystals at temperatures below 1 K and magnetic field up to 10 T is investigated. The data allow us to determine the relaxation time spectrum of the low energy excitations caused by the charge-density wave (CDW) or spin-density wave (SDW). The relaxation time is mainly determined by a thermal activated process for all investigated materials. The maximum relaxation time increases with increasing magnetic field. The distribution of barrier heights corresponds to one or two Gaussian functions. The doping of Sr$_{14-x}$Ca$_{x}$Cu$_{24}$O$_{41}$ with Ca leads to a drastic shift of the relaxation time spectrum to longer time. The maximum relaxation time changes from 50 s (x = 0) to 3000 s (x = 12) at 0.1 K and 10 T. The observed thermal relaxation at x=12 clearly indicates the formation of the SDW ground state at low temperatures

Electronic structure and properties of (TiZrNbCu)_1-xNi_x high entropy amorphous alloys

A comprehensive study of selected properties of four (TiZrNbCu)_1-xNi_x (x \le 0.25) amorphous high entropy alloys (a-HEA) has been performed. The samples were ribbons about 20 \mum thick and their fully amorphous state was verified by X-ray diffraction and thermal analysis. The surface morphology, precise composition and the distribution of components were studied with a Scanning electron microscope (SEM) with an energy dispersive spectroscopy (EDS) attachment. The properties selected were the melting temperature (T_m), the low temperature specific heat (LTSH), the magnetic susceptibility \chi_exp and the Young^,s modulus (E). Whereas LTSH and \chi_exp were measured for the as-cast samples, E was measured both for as-cast samples and relaxed samples (after a short anneal close to the glass transition temperature). The LTSH showed that the electronic density of states at the Fermi level, N_0(E_F), decreases with increasing x, whereas the Debye temperature (\theta_D) increases with x. This is similar to what is observed in binary and ternary amorphous alloys of early transition metals (TE) with late transition metals (TL) and indicates that N_0(E_F) is dominated by the d-electrons of the TE. The LTSH also showed the absence of superconductivity down to 1.8K and indicated the emergence of the Boson peak above 4K in all alloys.The free-electron like paramagnetic contribution to \chi_exp also decreases with x, whereas E, like \theta_D, increases with x, indicating enhanced interatomic bonding on addition of Ni. The applicability of the rule of mixtures to these and other similar HEAs is briefly discussed

The development of absorptive capacity-based innovation in a construction SME

Traditionally, construction has been a transaction-oriented industry. However, it is changing from the design-bid-build process into a business based on innovation capability and performance management, in which contracts are awarded on the basis of factors such as knowledge, intellectual capital and skills. This change presents a challenge to construction-sector SMEs with scarce resources, which must find ways to innovate based on those attributes to ensure their future competitiveness. This paper explores how dynamic capability, using an absorptive capacity framework in response to these challenges, has been developed in a construction-based SME. The paper also contributes to the literature on absorptive capacity and innovation by showing how the construct can be operationalized within an organization. The company studied formed a Knowledge Transfer Partnership using action research over a two-year period with a local university. The aim was to increase its absorptive capacity and hence its ability to meet the changing market challenges. The findings show that absorptive capacity can be operationalized into a change management approach for improving capability-based competitiveness. Moreover, it is important for absorptive capacity constructs and language to be contextualized within a given organizational setting (as in the case of the construction-based SME in the present study)

Persistent Replication of a Chikungunya Virus Replicon in Human Cells is Associated with Presence of Stable Cytoplasmic Granules Containing Non-structural Protein 3

Chikungunya virus (CHIKV), a mosquito-borne human pathogen, causes a disabling disease characterized by severe joint pain that can persist for weeks, months or even years in patients. The non-structural protein 3 (nsP3) plays essential roles during acute infection, but little is known about the function of nsP3 during chronic disease. Here, we used sub-diffraction multi-color microscopy for spatial and temporal analysis of CHIKV nsP3 within human cells that persistently replicate replicon RNA. Round cytoplasmic granules of various sizes (i) contained nsP3 and stress granule assembly factors 1 and 2 (G3BP1/2); (ii) were next to double-stranded RNA foci and nsP1-positive structures; and (iii) were close to the nuclear membrane and the nuclear pore complex protein Nup98. Analysis of protein turnover and mobility by live-cell microscopy revealed that granules could persist for hours to days, accumulated newly synthesized protein, and moved through the cytoplasm at varying speeds. Granules also had a static internal architecture and were stable in cell lysates. Refractory cells that had cleared the non-cytotoxic replicon regained the ability to respond to arsenite-induced stress. In summary, nsP3 can form uniquely stable granular structures that persist long-term within the host cell. This continued presence of viral and cellular protein-complexes has implications for the study of the pathogenic consequences of lingering CHIKV infection and the development of strategies to mitigate the burden of chronic musculoskeletal disease brought about by a medically important arthropod-borne virus (arbovirus).ImportanceChikungunya virus (CHIKV) is a re-emerging alphavirus transmitted by mosquitos and causes transient sickness but also chronic disease affecting muscles and joints. No approved vaccines or antivirals are available. Thus, a better understanding of the viral life cycle and the role of viral proteins can aid in identifying new therapeutic targets. Advances in microscopy and development of non-cytotoxic replicons (Utt, Das, Varjak, Lulla, Lulla, Merits, J Virol 89:3145-62, 2015, doi:10.1128/JVI.03213-14) have allowed researchers to study viral proteins within controlled laboratory environments over extended durations. Here we established human cells that stably replicate replicon RNA and express tagged non-structural protein 3. The ability to track nsP3 within the host cell and during persistent replication can benefit fundamental research efforts to better understand long-term consequences of the persistence of viral protein complexes and thereby provide the foundation for new therapeutic targets to control CHIKV infection and treat chronic disease symptoms

MSK1 regulates transcriptional induction of Arc/Arg3.1 in response to neurotrophins

The immediate early gene activity-regulated cytoskeletal protein (Arc)/Arg3.1 and the neurotrophin brain-derived neurotrophic factor (BDNF) play important roles in synaptic plasticity and learning and memory in the mammalian brain. However, the mechanisms by which BDNF regulates the expression of Arc/Arg3.1 are unclear. In this study, we show that BDNF acts via the ERK1/2 pathway to activate the nuclear kinase mitogen- and stress-activated protein kinase 1 (MSK1). MSK1 then induces Arc/Arg3.1 expression via the phosphorylation of histone H3 at the Arc/Arg3.1 promoter. MSK1 can also phosphorylate the transcription factor cyclic-AMP response element-binding protein (CREB) on Ser133. However, this is not required for BDNF-induced Arc.Arg3.1 transcription as a Ser133Ala knockin mutation had no effect on Arc/Arg3.1 induction. In parallel, ERK1/2 directly activates Arc/Arg3.1 mRNA transcription via at least one serum response element on the promoter, which bind a complex of the Serum Response Factor (SRF) and a Ternary Complex Factor (TCF)

Strong-Pinning Effects in Low-Temperature Creep: Charge-Density Waves in TaS_3

Nonlinear conduction in the quasi-one dimensional conductor o-TaS_3 has been studied in the low-temperature region down to 30 mK. It was found that at temperatures below a few Kelvins the current-voltage (I-V) characteristics consist of several branches. The temperature evolution of the I-V curve proceeds through sequential freezing-out of the branches. The origin of each branch is attributed to a particular strong pinning impurity type. Similar behavior is expected for other physical systems with collective transport (spin-density waves, Wigner crystals, vortex lattices in type-II superconductors etc.) in the presence of strong pinning centers.Comment: 11 pages, 3 ps figures, Revtex, To be published in Phys. Rev. Letters (1997