Métodos alternativos de muestreo para estimar la estructura y caracteres reproductivos de bosques

Aleppo pine had a large forest cover in North Africa and along the Mediterranean basin which management is not fully developed and new forest tools are required. In this research, the forest structure, epidometric characteristics and allometric relationships were studied in 79 plots covering four bioclimatic zones from natural even aged forests of Aleppo pine located between eastern Algeria to the western coastal part of Tunisia. To characterize the forest structure three sampling methods were carried out: classical inventories (recording all pine trees), and two simplified approach using one average size or five dominant pine tree per plot. Annual growth increment and cone production were only calculated for the average size tree. Furthermore, the analysis of variance showed non-significant differences recorded between bioclimatic zones in trunk or crown diameter using the two simplified approach. Moreover, a significant decrease from wetter to drier areas in total height, crown height, cone seed production was observed only for average size tree method. However, the analysis of covariance showed significant differences between both approaches in total height, trunk diameter and crown coverage which were largely influenced by the pine tree density. In future investigations, we confirmed previous research that the dominant tree is a good sampling method to examine the site fertility, whereas the average size tree constitutes a valuable approach to study the population growth and reproduction.El pino carrasco muestra una gran cobertura forestal, tanto en el norte de África como en toda la Cuenca Mediterránea, cuyo manejo no está totalmente desarrollado lo que requiere nuevas herramientas de manejo. En esta investigación, se estudiaron la estructura forestal, las características epidométricas y las relaciones alométricas de 79 parcelas distribuidas a lo largo de cuatro zonas bioclimáticas en bosques regulares de pino carrasco situados entre el este de Argelia y la costa este de Túnez. Para caracterizar la estructura forestal se aplicaron tres métodos de muestreo: inventario clásico (midiendo todos los pies) y dos propuestas más sencillas, usando un árbol medio o cinco pies dominantes por parcela. El análisis de varianza no mostraba diferencias significativas de las mediciones de diámetro de tronco y de copa realizadas entre las distintas zonas bioclimáticas usando ambos métodos. Por otra parte, se observó una disminución significativa de las zonas más húmedas a las más secas en altura toral, altura de copa y producción de semillas fue observada aplicando el método de árbol medio. Además, el análisis de covarianzas mostraba diferencias significativas, usando ambas metodologías, en los valores medios de altura total, diámetro de tronco y cobertura de copa que mostraron estar influenciados por los valores de la densidad de arbolado de cada zona. Para futuras investigaciones, confirmamos estudios previos que apuntaban que la propuesta de muestreo de árboles dominantes como un buen método de muestreo para caracterizar la calidad de sitio mientras que la de árbol medio constituye una valiosa propuesta para el estudio del crecimiento de poblaciones y sus características reproductivas

Measurement of the azimuthal anisotropy of Y(1S) and Y(2S) mesons in PbPb collisions at √S^{S}NN = 5.02 TeV

The second-order Fourier coefficients (υ$_{2}$) characterizing the azimuthal distributions of Υ(1S) and Υ(2S) mesons produced in PbPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV are studied. The Υmesons are reconstructed in their dimuon decay channel, as measured by the CMS detector. The collected data set corresponds to an integrated luminosity of 1.7 nb$^{-1}$. The scalar product method is used to extract the υ$_{2}$ coefficients of the azimuthal distributions. Results are reported for the rapidity range |y| < 2.4, in the transverse momentum interval 0 < p$_{T}$ < 50 GeV/c, and in three centrality ranges of 10–30%, 30–50% and 50–90%. In contrast to the J/ψ mesons, the measured υ$_{2}$ values for the Υ mesons are found to be consistent with zero

Measurement of prompt D0^{0} and D‾\overline{D}0^{0} meson azimuthal anisotropy and search for strong electric fields in PbPb collisions at root SNN\sqrt{S_{NN}} = 5.02 TeV

The strong Coulomb field created in ultrarelativistic heavy ion collisions is expected to produce a rapiditydependent difference (Av2) in the second Fourier coefficient of the azimuthal distribution (elliptic flow, v2) between D0 (uc) and D0 (uc) mesons. Motivated by the search for evidence of this field, the CMS detector at the LHC is used to perform the first measurement of Av2. The rapidity-averaged value is found to be (Av2) = 0.001 ? 0.001 (stat)? 0.003 (syst) in PbPb collisions at ?sNN = 5.02 TeV. In addition, the influence of the collision geometry is explored by measuring the D0 and D0mesons v2 and triangular flow coefficient (v3) as functions of rapidity, transverse momentum (pT), and event centrality (a measure of the overlap of the two Pb nuclei). A clear centrality dependence of prompt D0 meson v2 values is observed, while the v3 is largely independent of centrality. These trends are consistent with expectations of flow driven by the initial-state geometry. ? 2021 The Author. Published by Elsevier B.V. This is an open access article under the CC BY licens

Performance of the CMS Level-1 trigger in proton-proton collisions at √s = 13 TeV

At the start of Run 2 in 2015, the LHC delivered proton-proton collisions at a center-of-mass energy of 13\TeV. During Run 2 (years 2015–2018) the LHC eventually reached a luminosity of 2.1× 10$^{34}$ cm$^{-2}$s$^{-1}$, almost three times that reached during Run 1 (2009–2013) and a factor of two larger than the LHC design value, leading to events with up to a mean of about 50 simultaneous inelastic proton-proton collisions per bunch crossing (pileup). The CMS Level-1 trigger was upgraded prior to 2016 to improve the selection of physics events in the challenging conditions posed by the second run of the LHC. This paper describes the performance of the CMS Level-1 trigger upgrade during the data taking period of 2016–2018. The upgraded trigger implements pattern recognition and boosted decision tree regression techniques for muon reconstruction, includes pileup subtraction for jets and energy sums, and incorporates pileup-dependent isolation requirements for electrons and tau leptons. In addition, the new trigger calculates high-level quantities such as the invariant mass of pairs of reconstructed particles. The upgrade reduces the trigger rate from background processes and improves the trigger efficiency for a wide variety of physics signals

Measurement of the Y(1S) pair production cross section and search for resonances decaying to Y(1S)μ⁺μ⁻ in proton-proton collisions at √s = 13 TeV

The fiducial cross section for Y(1S)pair production in proton-proton collisions at a center-of-mass energy of 13TeVin the region where both Y(1S)mesons have an absolute rapidity below 2.0 is measured to be 79 ± 11 (stat) ±6 (syst) ±3 (B)pbassuming the mesons are produced unpolarized. The last uncertainty corresponds to the uncertainty in the Y(1S)meson dimuon branching fraction. The measurement is performed in the final state with four muons using proton-proton collision data collected in 2016 by the CMS experiment at the LHC, corresponding to an integrated luminosity of 35.9fb$^{-1}$. This process serves as a standard model reference in a search for narrow resonances decaying to Y(1S)μ$^{+}$μ$^{-}$ in the same final state. Such a resonance could indicate the existence of a tetraquark that is a bound state of two bquarks and two b̅ antiquarks. The tetraquark search is performed for masses in the vicinity of four times the bottom quark mass, between 17.5 and 19.5GeV, while a generic search for other resonances is performed for masses between 16.5 and 27GeV. No significant excess of events compatible with a narrow resonance is observed in the data. Limits on the production cross section times branching fraction to four muons via an intermediate Y(1S)resonance are set as a function of the resonance mass

Pileup mitigation at CMS in 13 TeV data

With increasing instantaneous luminosity at the LHC come additional reconstruction challenges. At high luminosity, many collisions occur simultaneously within one proton-proton bunch crossing. The isolation of an interesting collision from the additional "pileup" collisions is needed for effective physics performance. In the CMS Collaboration, several techniques capable of mitigating the impact of these pileup collisions have been developed. Such methods include charged-hadron subtraction, pileup jet identification, isospin-based neutral particle "δβ" correction, and, most recently, pileup per particle identification. This paper surveys the performance of these techniques for jet and missing transverse momentum reconstruction, as well as muon isolation. The analysis makes use of data corresponding to 35.9 fb$^{-1}$ collected with the CMS experiment in 2016 at a center-of-mass energy of 13 TeV. The performance of each algorithm is discussed for up to 70 simultaneous collisions per bunch crossing. Significant improvements are found in the identification of pileup jets, the jet energy, mass, and angular resolution, missing transverse momentum resolution, and muon isolation when using pileup per particle identification

Identification of heavy, energetic, hadronically decaying particles using machine-learning techniques

Machine-learning (ML) techniques are explored to identify and classify hadronic decays of highly Lorentz-boosted W/Z/Higgs bosons and top quarks. Techniques without ML have also been evaluated and are included for comparison. The identification performances of a variety of algorithms are characterized in simulated events and directly compared with data. The algorithms are validated using proton-proton collision data at √s = 13TeV, corresponding to an integrated luminosity of 35.9 fb−1. Systematic uncertainties are assessed by comparing the results obtained using simulation and collision data. The new techniques studied in this paper provide significant performance improvements over non-ML techniques, reducing the background rate by up to an order of magnitude at the same signal efficiency