287 research outputs found
Time-division SQUID multiplexers with reduced sensitivity to external magnetic fields
Time-division SQUID multiplexers are used in many applications that require
exquisite control of systematic error. One potential source of systematic error
is the pickup of external magnetic fields in the multiplexer. We present
measurements of the field sensitivity figure of merit, effective area, for both
the first stage and second stage SQUID amplifiers in three NIST SQUID
multiplexer designs. These designs include a new variety with improved
gradiometry that significantly reduces the effective area of both the first and
second stage SQUID amplifiers.Comment: 4 pages, 7 figures. Submitted for publication in the IEEE
Transactions on Applied Superconductivity, August 201
First Astronomical Use of Multiplexed Transition Edge Bolometers
We present performance results based on the first astronomical use of multiplexed superconducting bolometers. The Fabry-Perot Interferometer Bolometer Research Experiment
(FIBRE) is a broadband submillimeter spectrometer that achieved first light in June 2001 at the Caltech Submillimeter Observatory (CSO). FIBRE'S detectors are superconducting transition edge sensor (TES) bolometers read out by a SQUID multiplexer. The Fabry-Perot uses a low
resolution grating to order sort the incoming light. A linear bolometer array consisting of 16 elements detects this dispersed light, capturing 5 orders simultaneously from one position on the sky. With tuning of the Fabry-Perot over one free spectral range, a spectrum covering Δλ/λ= 1/7 at a resolution of δλ/λ ≈ 1/1200 can be acquired. This spectral resolution is sufficient to resolve
Doppler-broadened line emission from external galaxies. FIBRE operates in the 350 µm and 450 µm bands. These bands cover line emission from the important star formation tracers neutral
carbon [Cl] and carbon monoxide (CO). We have verified that the multiplexed bolometers are
photon noise limited even with the low power present in moderate resolution spectrometry
Sterile Neutrinos, Coherent Scattering and Oscillometry Measurements with Low-temperature Bolometers
Coherent neutrino-nucleon scattering offers a unique approach in the search
for physics beyond the Standard Model. When used in conjunction with
mono-energetic neutrino sources, the technique can be sensitive to the
existence of light sterile neutrinos. The ability to utilize such reactions has
been limited in the past due to the extremely low energy threshold (10-50 eV)
needed for detection. In this paper, we discuss an optimization of cryogenic
solid state bolometers that enables reaching extremely low kinetic energy
thresholds. We investigate the sensitivity of an array of such detectors to
neutrino oscillations to sterile states. A recent analysis of available reactor
data appears to favor the existence of such such a sterile neutrino with a mass
splitting of eV and mixing strength of
at 95% C.L. An array of such
low-threshold detectors would be able to make a definitive statement as to the
validity of the interpretation.Comment: 14 pages, 10 figures. Version 2: Temperature dependence on alpha
fixed from earlier versio
Advanced code-division multiplexers for superconducting detector arrays
Multiplexers based on the modulation of superconducting quantum interference
devices are now regularly used in multi-kilopixel arrays of superconducting
detectors for astrophysics, cosmology, and materials analysis. Over the next
decade, much larger arrays will be needed. These larger arrays require new
modulation techniques and compact multiplexer elements that fit within each
pixel. We present a new in-focal-plane code-division multiplexer that provides
multiplexing elements with the required scalability. This code-division
multiplexer uses compact lithographic modulation elements that simultaneously
multiplex both signal outputs and superconducting transition-edge sensor (TES)
detector bias voltages. It eliminates the shunt resistor used to voltage bias
TES detectors, greatly reduces power dissipation, allows different dc bias
voltages for each TES, and makes all elements sufficiently compact to fit
inside the detector pixel area. These in-focal-plane code-division multiplexers
can be combined with multi-gigahertz readout based on superconducting
microresonators to scale to even larger arrays.Comment: 8 pages, 3 figures, presented at the 14th International Workshop on
Low Temperature Detectors, Heidelberg University, August 1-5, 2011,
proceedings to be published in the Journal of Low Temperature Physic
Prototype finline-coupled TES bolometers for CLOVER
CLOVER is an experiment which aims to detect the signature of gravitational
waves from inflation by measuring the B-mode polarization of the cosmic
microwave background. CLOVER consists of three telescopes operating at 97, 150,
and 220 GHz. The 97-GHz telescope has 160 feedhorns in its focal plane while
the 150 and 220-GHz telescopes have 256 horns each. The horns are arranged in a
hexagonal array and feed a polarimeter which uses finline-coupled TES
bolometers as detectors. To detect the two polarizations the 97-GHz telescope
has 320 detectors while the 150 and 220-GHz telescopes have 512 detectors each.
To achieve the target NEPs (1.5, 2.5, and 4.5x10^-17 W/rtHz) the detectors are
cooled to 100 mK for the 97 and 150-GHz polarimeters and 230 mK for the 220-GHz
polarimeter. Each detector is fabricated as a single chip to ensure a 100%
operational focal plane. The detectors are contained in linear modules made of
copper which form split-block waveguides. The detector modules contain 16 or 20
detectors each for compatibility with the hexagonal arrays of horns in the
telescopes' focal planes. Each detector module contains a time-division SQUID
multiplexer to read out the detectors. Further amplification of the multiplexed
signals is provided by SQUID series arrays. The first prototype detectors for
CLOVER operate with a bath temperature of 230 mK and are used to validate the
detector design as well as the polarimeter technology. We describe the design
of the CLOVER detectors, detector blocks, and readout, and present preliminary
measurements of the prototype detectors performance.Comment: 4 pages, 6 figures; to appear in the Proceedings of the 17th
International Symposium on Space Terahertz Technology, held 10-12 May 2006 in
Pari
- …