Applying Membrane Distillation for the Recovery of Nitrate from Saline Water Using PVDF Membranes Modified as Superhydrophobic Membranes.

In this study, a flat sheet direct contact membrane distillation (DCMD) module was designed to eliminate nitrate from water. A polyvinylidene fluoride (PVDF) membrane was used in a DCMD process at an ambient pressure and at a temperature lower than the boiling point of water. The electrical conductivity of the feed containing nitrate increased, while the electrical conductivity of the permeate remained constant during the entire process. The results indicated that the nitrate ions failed to pass through the membrane and their concentration in the feed increased as pure water passed through the membrane. Consequently, the membrane was modified using TiO2 nanoparticles to make a hierarchical surface with multi-layer roughness on the micro/nanoscales. Furthermore, 1H,1H,2H,2H-Perfluorododecyltrichlorosilane (FTCS) was added to the modified surface to change its hydrophobic properties into superhydrophobic properties and to improve its performance. The results for both membranes were compared and reported on a pilot scale using MATLAB. In the experimental scale (a membrane surface area of 0.0014 m2, temperature of 77 °C, nitrate concentration of 0.9 g/Kg, and flow rate of 0.0032 Kg/s), the flux was 2.3 Kgm-2h-1. The simulation results of MATLAB using these data showed that for the removal of nitrate (with a concentration of 35 g/Kg) from the intake feed with a flow rate of 1 Kg/s and flux of 0.96 Kgm-2h-1, a membrane surface area of 0.5 m2 was needed

Experimental and numerical study of elasto-inertial focusing in straight channels.

Elasto-inertial microfluidics has drawn significant attention in recent years due to its enhanced capabilities compared to pure inertial systems in control of small microparticles. Previous investigations have focused mainly on the applications of elasto-inertial sorting, rather than studying its fundamentals. This is because of the complexity of simulation and analysis, due to the presence of viscoelastic force. There have been some investigative efforts on the mechanisms of elasto-inertial focusing in straight channels; however, these studies were limited to simple rectangular channels and neglected the effects of geometry and flow rates on focusing positions. Herein, for the first time, we experimentally and numerically explore the effects of elasticity accompanying channel cross-sectional geometry and sample flow rates on the focusing phenomenon in elasto-inertial systems. The results reveal that increasing the aspect ratio weakens the elastic force more than inertial force, causing a transition from one focusing position to two. In addition, they show that increasing the angle of a channel corner causes the elastic force to push the particles more efficiently toward the center over a larger area of the channel cross section. Following on from this, we proposed a new complex straight channel which demonstrates a tighter focusing band compared to other channel geometries. Finally, we focused Saccharomyces cerevisiae cells (3-5 μm) in the complex channel to showcase its capability in focusing small-size particles. We believe that this research work improves the understanding of focusing mechanisms in viscoelastic solutions and provides useful insights into the design of elasto-inertial microfluidic devices

Electro-driven materials and processes for lithium recovery—A review

The mass production of lithium-ion batteries and lithium-rich e-products that are required for electric vehicles, energy storage devices, and cloud-connected electronics is driving an unprecedented demand for lithium resources. Current lithium production technologies, in which extraction and purification are typically achieved by hydrometallurgical routes, possess strong environmental impact but are also energy-intensive and require extensive operational capabilities. The emergence of selective membrane materials and associated electro-processes offers an avenue to reduce these energy and cost penalties and create more sustainable lithium production approaches. In this review, lithium recovery technologies are discussed considering the origin of the lithium, which can be primary sources such as minerals and brines or e-waste sources generated from recycling of batteries and other e-products. The relevance of electro-membrane processes for selective lithium recovery is discussed as well as the potential and shortfalls of current electro-membrane methods

Development of a Biomimetic Semicircular Canal with MEMS Sensors to Restore Balance

© 2001-2012 IEEE. A third of adults over the age of 50 suffer from chronic impairment of balance, posture, and/or gaze stability due to partial or complete impairment of the sensory cells in the inner ear responsible for these functions. The consequences of impaired balance organ can be dizziness, social withdrawal, and acceleration of the further functional decline. Despite the significant progress in biomedical sensing technologies, current artificial vestibular systems fail to function in practical situations and in very low frequencies. Herein, we introduced a novel biomechanical device that closely mimics the human vestibular system. A microelectromechanical systems (MEMS) flow sensor was first developed to mimic the vestibular haircell sensors. The sensor was then embedded into a three-dimensional (3D) printed semicircular canal and tested at various angular accelerations in the frequency range from 0.5Hz to 1.5Hz. The miniaturized device embedded into a 3D printed model will respond to mechanical deflections and essentially restore the sense of balance in patients with vestibular dysfunctions. The experimental and simulation studies of semicircular canal presented in this work will pave the way for the development of balance sensory system, which could lead to the design of a low-cost and commercially viable medical device with significant health benefits and economic potential

A new nickel-based co-crystal complex electrocatalyst amplified by NiO dope Pt nanostructure hybrid; a highly sensitive approach for determination of cysteamine in the presence of serotonin.

A highly sensitive electrocatalytic sensor was designed and fabricated by the incorporation of NiO dope Pt nanostructure hybrid (NiO-Pt-H) as conductive mediator, bis (1,10 phenanthroline) (1,10-phenanthroline-5,6-dione) nickel(II) hexafluorophosphate (B,1,10,P,1,10, PDNiPF6), and electrocatalyst into carbon paste electrode (CPE) matrix for the determination of cysteamine. The NiO-Pt-H was synthesized by one-pot synthesis strategy and characterized by XRD, elemental mapping analysis (MAP), and FESEM methods. The characterization data, which confirmed good purity and spherical shape with a diameter of ⁓ 30.64 nm for the synthesized NiO-Pt-H. NiO-Pt-H/B,1,10, P,1,10, PDNiPF6/CPE, showed an excellent catalytic activity and was used as a powerful tool for the determination of cysteamine in the presence of serotonin. The NiO-Pt-H/B,1,10, P,1,10, PDNiPF6/CPE was able to solve the overlap problem of the two drug signals and was used for the determination of cysteamine and serotonin in concentration ranges of 0.003-200 µM and 0.5-260 µM with detection limits of 0.5 nM and 0.1 µM, using square wave voltammetric method, respectively. The NiO-Pt-H/B,1,10,P,1,10,PDNiPF6/CPE showed a high-performance ability for the determination of cysteamine and serotonin in the drug and pharmaceutical serum samples with the recovery data of 98.1-103.06%

Cross-sectional analysis of baseline differences of candidates for rotator cuff surgery: a sex and gender perspective

<p>Abstract</p> <p>Background</p> <p>The word "sex" refers to biological differences between men and women. Gender refers to roles, behaviors, activities, and attributes that a given society considers appropriate for men and women. Traditionally, treatment decisions have been based on patient's sex without including the gender. Assessment of disability secondary to musculoskeletal problems would not be complete or accurate unless potentially relevant biological and non-biological aspects of being a man or woman are taken into consideration. The purposes of this study were to: 1) investigate the difference in pre-operative characteristics between men and women who were candidates for rotator cuff surgery; and, 2) assess the relationship between level of disability and factors that represent sex and factors that signify gender.</p> <p>Method</p> <p>This was a cross-sectional study. The primary outcome measure of disability was a disease-specific outcome measure, the Western Ontario Rotator Cuff (WORC) index, and independent variables were sex, age, hand dominance, shoulder side involvement, BMI, co-morbidity, medication use, work status, smoking habits, strength, range of motion, level of pathology, concurrent osteoarthritis, expectations for recovery, and participation restriction. Parametric, non-parametric, univariable, subgroup, and multivariable analyses were conducted.</p> <p>Results</p> <p>One hundred and seventy patients were included in the study. The mean age was 57 ± 11, 85 were females. Women reported higher levels of disability despite similar or lower levels of pathology. Scores of the WORC were strongly influenced by factors that represented "gender" such as participation restriction (F = 28.91, p < 0.0001) and expectations for improved activities of daily living (F = 5.80, p = 0.004). Painfree combined range of motion, which represented an interaction between "sex" and "gender" was also associated with disability after being adjusted for all other relevant baseline factors (F = 25.82, p < 0.0001).</p> <p>Conclusion</p> <p>Gender-related factors such as expectations and participation limitations have an independent impact on disability in men and women undergoing rotator cuff related surgery.</p

Fabrication of unconventional inertial microfluidic channels using wax 3D printing.

Inertial microfluidics has emerged over the past decade as a powerful tool to accurately control cells and microparticles for diverse biological and medical applications. Many approaches have been proposed to date in order to increase the efficiency and accuracy of inertial microfluidic systems. However, the effects of channel cross-section and solution properties (Newtonian or non-Newtonian) have not been fully explored, primarily due to limitations in current microfabrication methods. In this study, we overcome many of these limitations using wax 3D printing technology and soft lithography through a novel workflow, which eliminates the need for the use of silicon lithography and polydimethylsiloxane (PDMS) bonding. We have shown that by adding dummy structures to reinforce the main channels, optimizing the gap between the dummy and main structures, and dissolving the support wax on a PDMS slab to minimize the additional handling steps, one can make various non-conventional microchannels. These substantially improve upon previous wax printed microfluidic devices where the working area falls into the realm of macrofluidics rather than microfluidics. Results revealed a surface roughness of 1.75 μm for the printed channels, which does not affect the performance of inertial microfluidic devices used in this study. Channels with complex cross-sections were fabricated and then analyzed to investigate the effects of viscoelasticity and superposition on the lateral migration of the particles. Finally, as a proof of concept, microcarriers were separated from human mesenchymal stem cells using an optimized channel with maximum cell-holding capacity, demonstrating the suitability of these microchannels in the bioprocessing industry

Multiple zoonotic helminth infections in domestic dogs in a rural area of Khuzestan Province in Iran

Background: Echinococcosis and toxocarosis caused by the genus of Echinococcus and Toxocara spp. are among important helminthic diseases worldwide. Limited data on the prevalence of these parasites persuaded us to determine the prevalence of E. granulosus, E. multilocularis, and T. canis infections in domestic dogs in rural areas of Ahvaz, southwestern Iran. Fecal samples from 167 domestic dogs were examined using both microscopy and PCR techniques. Multiplex PCR was performed for the presence of Echinococcus, and Taenia spp. and single PCR for detection of T. canis and Toxascaris leonina. Results: The total occurrence of identified parasites was 65 (38.9). The microscopic examinations showed that 40 (24), 18 (10.8), and four (2.4) of dogs were infected with taeniid-like, ascarid, and both genera eggs, respectively. Echinococcus granulosus was identified in seven (4.2), Taenia spp. in 29 (17.4), and mixed infection with both in 11 (6.6) samples. Sequencing of PCR-positive samples identified E. granulosus s.s. (G1), 18 T. hydatigena (10.8), five T. multiceps (3), three T. serialis (1.8), one T. ovis (0.6), one Spirometra erinaceieuropaei voucher (0.6), and two Mesocestoides corti (1.2). This is the first report of S. erinaceieuropaei voucher and M. corti in dogs in Iran. Nine (5.4) and 16 (9.6) dogs showed infection with T. canis and T. leonina, respectively. Two samples showed coinfection with both ascarids. Conclusions: Several studies have reported echinococcosis and toxocarosis in intermediate hosts from the southwest of Iran; however, this study is the first molecular research on E. granulosus and T. canis in domestic dogs in a rural area of southwestern Iran. Furthermore, issues of soil contamination with dogs' feces and recent dust storms in Khuzestan may have a role in the spreading of these zoonotic infections to other provinces close to it, and neighboring countries such as Iraq. © 2018 The Author(s)

Digestive proteolytic activity of Scrobipalpa ocellatella (Lepidoptera: Gelechiidae) on various sugar beet cultivars

فعالیت پروتئولیتیک گوارشی بید چغندرقند، Scrobipalpa ocellatella (Boyd)، روی ارقام مختلف چغندرقند(Rosire, Laetitia, Ardabili, Persia, Aras and Flores) تحت شرایط مزرعه‌ای بررسی شد. لاروهای سن سوم روی رقم Flores بیشترین فعالیت آنزیمی و لاروهای پرورش‌یافته روی رقم Aras کمترین فعالیت آنزیمی را داشتند. آنالیز زایموگرام نشان داد که کمترین تعداد آیزوزایم‌های پروتئاز در عصاره معده میانی لاروهایی بود که از رقم Aras تغذیه کرده بودند. با توجه به نتایج به دست آمده، رقم چغندرقند بر فیزیولوژی گوارشی بید چغندرقند تأثیرگذار بود

ZIF-8 Modified Polypropylene Membrane: A Biomimetic Cell Culture Platform with a View to the Improvement of Guided Bone Regeneration.

PurposeDespite the significant advances in modeling of biomechanical aspects of cell microenvironment, it remains a major challenge to precisely mimic the physiological condition of the particular cell niche. Here, the metal-organic frameworks (MOFs) have been introduced as a feasible platform for multifactorial control of cell-substrate interaction, given the wide range of physical and mechanical properties of MOF materials and their structural flexibility.ResultsIn situ crystallization of zeolitic imidazolate framework-8 (ZIF-8) on the polydopamine (PDA)-modified membrane significantly raised surface energy, wettability, roughness, and stiffness of the substrate. This modulation led to an almost twofold increment in the primary attachment of dental pulp stem cells (DPSCs) compare to conventional plastic culture dishes. The findings indicate that polypropylene (PP) membrane modified by PDA/ZIF-8 coating effectively supports the growth and proliferation of DPSCs at a substantial rate. Further analysis also displayed the exaggerated multilineage differentiation of DPSCs with amplified level of autocrine cell fate determination signals, like BSP1, BMP2, PPARG, FABP4, ACAN, and COL2A. Notably, osteogenic markers were dramatically overexpressed (more than 100-folds rather than tissue culture plate) in response to biomechanical characteristics of the ZIF-8 layer.ConclusionHence, surface modification of cell culture platforms with MOF nanostructures proposed as a powerful nanomedical approach for selectively guiding stem cells for tissue regeneration. In particular, PP/PDA/ZIF-8 membrane presented ideal characteristics for using as a barrier membrane for guided bone regeneration (GBR) in periodontal tissue engineering