Finite element solution of transient fluid-structure interaction problems

A finite element approach using NASTRAN is developed for solving time-dependent fluid-structure interaction problems, with emphasis on the transient scattering of acoustic waves from submerged elastic structures. Finite elements are used for modeling both structure and fluid domains to facilitate the graphical display of the wave motion through both media. For the liquid, the use of velocity potential as the fundamental unknown results in a symmetric matrix equation. The approach is illustrated for the problem of transient scattering from a submerged elastic spherical shell subjected to an incident tone burst. The use of an analogy between the equations of elasticity and the wave equation of acoustics, a necessary ingredient to the procedure, is summarized

Neurophysiology

Contains reports on one research project.Bell Telephone Laboratories IncorporatedNational Institutes of Health (Grant 5 PO1 GM14940-05

ECONOMIC AND EPIDEMIOLOGIC POLICY IMPLICATIONS OF ALTERNATIVE BOVINE BRUCELLOSIS PROGRAMS

This paper analyzes policy implications arising from the National Brucellosis Technical Commission Study. A systems simulation model was designed to estimate physical losses resulting from alternative bovine brucellosis programs. Changes in benefits, costs, level of infection and net benefits were calculated by program alternatives for determining economic and epidemiologic implications. Results indicate all alternative programs considered yield positive net benefits and reduce the prevalence of the disease. The results imply a need for further research to determine a program that is both epidemiologically and economically optimal.Livestock Production/Industries,

Transforming AdaPT to Ada

This paper describes how the main features of the proposed Ada language extensions intended to support distribution, and offered as possible solutions for Ada9X can be implemented by transformation into standard Ada83. We start by summarizing the features proposed in a paper (Gargaro et al, 1990) which constitutes the definition of the extensions. For convenience we have called the language in its modified form AdaPT which might be interpreted as Ada with partitions. These features were carefully chosen to provide support for the construction of executable modules for execution in nodes of a network of loosely coupled computers, but flexibly configurable for different network architectures and for recovery following failure, or adapting to mode changes. The intention in their design was to provide extensions which would not impact adversely on the normal use of Ada, and would fit well in style and feel with the existing standard. We begin by summarizing the features introduced in AdaPT

Programming in a proposed 9X distributed Ada

The studies of the proposed Ada 9X constructs for distribution, now referred to as AdaPT are reported. The goals for this time period were to revise the chosen example scenario and to begin studying about how the proposed constructs might be implemented. The example scenario chosen is the Submarine Combat Information Center (CIC) developed by IBM for the Navy. The specification provided by IBM was preliminary and had several deficiencies. To address these problems, some changes to the scenario specification were made. Some of the more important changes include: (1) addition of a system database management function; (2) addition of a fourth processing unit to the standard resources; (3) addition of an operator console interface function; and (4) removal of the time synchronization function. To implement the CIC scenario in AdaPT, the decided strategy were publics, partitions, and nodes. The principle purpose for implementing the CIC scenario was to demonstrate how the AdaPT constructs interact with the program structure. While considering ways that the AdaPt constructs might be translated to Ada 83, it was observed that the partition construct could reasonably be modeled as an abstract data type. Although this gives a useful method of modeling partitions, it does not at all address the configuration aspects on the node construct

Transforming AdaPT to Ada9x

How the concepts of AdaPT can be transformed into programs using the object oriented features proposed in the preliminary mapping for Ada9x are described. Emphasizing, as they do, the importance of data types as units of program, these features match well with the development of partitions as translations into Abstract Data Types which was exploited in the Ada83 translation covered in report R3. By providing a form of polymorphic type, the Ada83 version also gives support for the conformant partition idea which could be achieved in Ada83 only by using UNCHECKED CONVERSIONS. It is assumed that the reader understands AdaPT itself, but the translation into Ada83 is briefly reviewed, by applying it to a small example. This is then used to show how the same translation would be achieved in the 9x version. It is important to appreciate that the distribution features which are proposed in current mapping are not used or discussed in any detail, as those are not well matched to the AdaPT approach. Critical evaluation and comparison of these approaches is given in a separate report

Distributed and parallel Ada and the Ada 9X recommendations

Recently, the DoD has sponsored work towards a new version of Ada, intended to support the construction of distributed systems. The revised version, often called Ada 9X, will become the new standard sometimes in the 1990s. It is intended that Ada 9X should provide language features giving limited support for distributed system construction. The requirements for such features are given. Many of the most advanced computer applications involve embedded systems that are comprised of parallel processors or networks of distributed computers. If Ada is to become the widely adopted language envisioned by many, it is essential that suitable compilers and tools be available to facilitate the creation of distributed and parallel Ada programs for these applications. The major languages issues impacting distributed and parallel programming are reviewed, and some principles upon which distributed/parallel language systems should be built are suggested. Based upon these, alternative language concepts for distributed/parallel programming are analyzed

Pepducins as a potential treatment strategy for asthma and COPD.

Current therapies to treat asthma and other airway diseases primarily include anti-inflammatory agents and bronchodilators. Anti-inflammatory agents target trafficking and resident immunocytes and structural cells, while bronchodilators act to prevent or reverse shortening of airway smooth muscle (ASM), the pivotal tissue regulating bronchomotor tone. Advances in our understanding of the biology of G protein-coupled receptors (GPCRs) and biased agonism offers unique opportunities to modulate GPCR function that include the use of pepducins and allosteric modulators. Recent evidence suggests that small molecule inhibitors of Gα q as well as pepducins targeting G q -coupled receptors can broadly inhibit contractile agonist-induced ASM function. Given these advances, new therapeutic approaches can be leveraged to diminish the global rise in morbidity and mortality associated with asthma and chronic obstructive pulmonary disease

On-line replacement of program modules using AdaPT

One purpose of our research is the investigation of the effectiveness and expressiveness of AdaPT(1), a set of language extensions to Ada 83, for distributed systems. As a part of that effort, we are now investigating the subject of replacing, e.g., upgrading, software modules while the software system remains in operation. The AdaPT language extension provide a good basis for this investigation for several reasons: (1) they include the concept of specific, self-contained program modules which can be manipulated; (2) support for program configuration is included in the language; and (3) although the discussion will be in terms of the AdaPT language, the AdaPT to Ada 83 conversion methodology being developed as another part of this project will provide a basis for the application of our findings to Ada 83 systems. The purpose of this investigation is to explore the basic mechanisms to the replacement process. Thus, while replacement in the presence of real-time deadlines, heterogeneous systems, and unreliable networks is certainly a topic of interest, we will first gain an understanding of the basic processes in the absence of such concerns. The extension of the replacement process to more complex situations can be made later. This report will establish an overview of the on-line upgrade problem, and present a taxonomy of the various aspects of the replacement process

No-till Forage Establishment in Alaska

We assessed the effectiveness of no-till forage establishment at six Alaska locations: Anchor Point, Sterling, Point MacKenzie, Palmer, Delta Junction, and Fairbanks. Directly seeding grass into established grass stands generally did not improve forage yields or quality. Seeding rate had little effect on establishment of newly seeded forages in no-till. Grass yields were depressed when companion crop yields were high, and they typically did not recover in subsequent years. Red clover established well, producing high yields of good quality forage under no-till at Point MacKenzie, but established poorly at Anchor Point and Delta Junction. These results indicated that no-till seeding of most forage crops into declining grass stands is not likely to be successful in Alaska with current available technology