CuO Thin Film Crystallization by Chevron CW Laser Annealing

In efforts to parallel the vastly changing consumer market of electronic products, devices engineered from improved techniques in maximizing performance while minimizing loss are researched and implemented. We report the results of crystallization of CuO amorphous thin films on quartz and silicon wafers with the chevron-tipped laser annealing system. Post-deposition averaged thickness values were reported to be 3.84nm, 15.49nm, and 98.19nm for Sample A, B and C, whereas averaged roughness values were 0.43nm, 0.51nm and 4.45nm, respectively, and confirming the smoothness of an amorphous film. Additional samples were sent to be characterized and potentially crystallized by a chevron-tipped laser annealing systems. The initial results showed a laser trace of ablation on Samples B and C at a power of approximately 318mW and 120 mW, respectively. However, further results, including crystallization and analysis are incomplete

Dual optofluidic distributed feedback dye lasers for multiplexed biosensing applications

Integrated optofluidic devices have become subjects of high interest for rapid biosensor devices due to their unique ability to combine the fluidic processing of small volumes of microfluidics with the analysis capabilities of photonic structures. By integrating dynamically reconfigurable optofluidic lasers on-chip, complex coupling can be eliminated while further increasing the capabilities of sensors to detect an increasing number of target biomarkers. Here, we report a polydimethylsiloxane-based device with two on-chip fluidic distributed feedback (DFB) laser cavities that are integrated with an orthogonal analyte channel for multiplexed fluorescence excitation. One DFB grating is filled with 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran dissolved in dimethyl sulfoxide. The second grating is filled with rhodamine 6G dissolved in a diluted ethylene glycol solution. We present characterization of both lasers through analysis of the lasing spectra for spectral narrowing along with a power series to observe threshold behavior. We then demonstrate simultaneous detection of two different fluorescent microbeads as a proof of concept for scalable, single biomarker analysis using on-chip optofluidic lasers

Dual optofluidic distributed feedback dye lasers for multiplexed biosensing applications

Abstract Integrated optofluidic devices have become subjects of high interest for rapid biosensor devices due to their unique ability to combine the fluidic processing of small volumes of microfluidics with the analysis capabilities of photonic structures. By integrating dynamically reconfigurable optofluidic lasers on-chip, complex coupling can be eliminated while further increasing the capabilities of sensors to detect an increasing number of target biomarkers. Here, we report a polydimethylsiloxane-based device with two on-chip fluidic distributed feedback (DFB) laser cavities that are integrated with an orthogonal analyte channel for multiplexed fluorescence excitation. One DFB grating is filled with 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran dissolved in dimethyl sulfoxide. The second grating is filled with rhodamine 6G dissolved in a diluted ethylene glycol solution. We present characterization of both lasers through analysis of the lasing spectra for spectral narrowing along with a power series to observe threshold behavior. We then demonstrate simultaneous detection of two different fluorescent microbeads as a proof of concept for scalable, single biomarker analysis using on-chip optofluidic lasers

All-in-One Optofluidic Chip for Molecular Biosensing Assays.

Integrated biosensor platforms have become subjects of high interest for consolidated assay preparation and analysis to reduce sample-to-answer response times. By compactly combining as many biosensor processes and functions as possible into a single lab-on-chip device, all-in-one point-of-care devices can aid in the accessibility and speed of deployment due to their compact size and portability. Biomarker assay preparation and sensing are functionalities that are often carried out on separate devices, thus increasing opportunity of contamination, loss of sample volume, and other forms of error. Here, we demonstrate a complete lab-on-chip system combining sample preparation, on-chip optofluidic dye laser, and optical detection. We first show the integration of an on-chip distributed feedback dye laser for alignment-free optical excitation of particles moving through a fluidic channel. This capability is demonstrated by using Rhodamine 6G as the gain medium to excite single fluorescent microspheres at 575 nm. Next, we present an optofluidic PDMS platform combining a microvalve network (automaton) for sample preparation of nanoliter volumes, on-chip distributed feedback dye laser for target excitation, and optical detection. We conduct concurrent capture and fluorescence tagging of Zika virus nucleic acid on magnetic beads in 30 min. Target-carrying beads are then optically excited using the on-chip laser as they flow through an analysis channel, followed by highly specific fluorescence detection. This demonstration of a complete all-in-one biosensor is a tangible step in the development of a rapid, point-of-care device that can assist in limiting the severity of future outbreaks

All-in-One Optofluidic Chip for Molecular Biosensing Assays

Integrated biosensor platforms have become subjects of high interest for consolidated assay preparation and analysis to reduce sample-to-answer response times. By compactly combining as many biosensor processes and functions as possible into a single lab-on-chip device, all-in-one point-of-care devices can aid in the accessibility and speed of deployment due to their compact size and portability. Biomarker assay preparation and sensing are functionalities that are often carried out on separate devices, thus increasing opportunity of contamination, loss of sample volume, and other forms of error. Here, we demonstrate a complete lab-on-chip system combining sample preparation, on-chip optofluidic dye laser, and optical detection. We first show the integration of an on-chip distributed feedback dye laser for alignment-free optical excitation of particles moving through a fluidic channel. This capability is demonstrated by using Rhodamine 6G as the gain medium to excite single fluorescent microspheres at 575 nm. Next, we present an optofluidic PDMS platform combining a microvalve network (automaton) for sample preparation of nanoliter volumes, on-chip distributed feedback dye laser for target excitation, and optical detection. We conduct concurrent capture and fluorescence tagging of Zika virus nucleic acid on magnetic beads in 30 min. Target-carrying beads are then optically excited using the on-chip laser as they flow through an analysis channel, followed by highly specific fluorescence detection. This demonstration of a complete all-in-one biosensor is a tangible step in the development of a rapid, point-of-care device that can assist in limiting the severity of future outbreaks

Optofluidic Particle Manipulation Platform with Nanomembrane

We demonstrate a method for fabricating and utilizing an optofluidic particle manipulator on a silicon chip that features a 300 nm thick silicon dioxide membrane as part of a microfluidic channel. The fabrication method is based on etching silicon channels and converting the walls to silicon dioxide through thermal oxidation. Channels are encapsulated by a sacrificial polymer which fills the length of the fluid channel by way of spontaneous capillary action. The sacrificial material is then used as a mold for the formation of a nanoscale, solid-state, silicon dioxide membrane. The hollow channel is primarily used for fluid and particle transport but is capable of transmitting light over short distances and utilizes radiation pressure for particle trapping applications. The optofluidic platform features solid-core ridge waveguides which can direct light on and off of the silicon chip and intersect liquid channels. Optical loss values are characterized for liquid and solid-core structures and at interfaces. Estimates are provided for the optical power needed to trap particles of various sizes