19,965 research outputs found
Use of leaning vanes in a two stage fan
The use of leaning vanes for tone noise reduction was examined in terms of their application in a typical two-stage high pressure ratio fan. In particular for stages designed with outlet guide vanes and zero swirl between stages, leaning the vanes of the first stage stator was studied, since increasing the number of vanes and the gap between stages do not provide the desired advantage. It was shown that noise reduction at higher harmonics of blade passing frequency can be obtained by leaning the vanes
Theoretical studies of tone noise from a fan rotor
An analytical study was made of some possible rotor alone noise sources of dipole, quadrapole and monopole characters which generate discrete tone noise. Particular emphasis is given to the tone noise caused by fan inlet flow distortion and turbulence. Analytical models are developed to allow prediction of absolute levels. Experimental data measured on a small scale fan is presented which indicates inlet turbulence interaction with a fan rotor can be a source of tone noise. Predicted and measured tone noise for the small scale rotor are shown to be in reasonable agreement
An optimality criterion for sizing members of heated structures with temperature constraints
A thermal optimality criterion is presented for sizing members of heated structures with multiple temperature constraints. The optimality criterion is similar to an existing optimality criterion for design of mechanically loaded structures with displacement constraints. Effectiveness of the thermal optimality criterion is assessed by applying it to one- and two-dimensional thermal problems where temperatures can be controlled by varying the material distribution in the structure. Results obtained from the optimality criterion agree within 2 percent with results from a closed-form solution and with results from a mathematical programming technique. The thermal optimality criterion augments existing optimality criteria for strength and stiffness related constraints and offers the possibility of extension of optimality techniques to sizing structures with combined thermal and mechanical loading
Groundwater externalities of surface irrigation transfers under National River Linking Project: Polavaram – Vijayawada link
River basin managementRiver basin developmentDevelopment projectsWater transferIrrigation canalsGroundwater irrigationTube well irrigationRiceSurface irrigationCrop managementSoil salinityWaterlogging
Developments of the pinned photodiode terahertz rectifier
This paper presents we presents a development of the structure of the pinned photodiode terahertz rectifier, in which the metal whisker of the antenna is separated from the semiconductor by a silane oxide layer, in order to reduce the surface defectiveness. The rectifies is the basic component of an image detection system based on the structure of actual CMOS image detectors. The structure combines a nano-antenna, fabricated on the top of a standard image sensor, the rectifier, and the readout electronics. The rectifier device proposed has vertical extension of some tenths of nanometers, can be created at the foot of the nano-whisker at the end of the terahertz antenna, above the storage well
The lower Krishna Basin trajectory: relationships between basin development and downstream environmental degradation
River basin development / Lakes / Environmental degradation / Ecosystems / Mangroves / Water allocation / Groundwater / Water quality / Salinity / Irrigated farming / Institutions / Irrigation canals / Rural development
Vibrational branching ratios in photoionization of CO and N2
We report results of experimental and theoretical studies of the vibrational branching ratios for CO 4sigma(-1) photoionization from 20 to 185 eV. Comparison with results for the 2sigma(u)(-1) channel of the isoelectronic N-2 molecule shows the branching ratios for these two systems to be qualitatively different due to the underlying scattering dynamics: CO has a shape resonance at low energy but lacks a Cooper minimum at higher energies whereas the situation is reversed for N-2
Performance Evaluation of the Indigenous Commercial Flotation Columns for Zinc Cleaning at Rajpura Dariba Plant of HZL in Rajasthan
Hindustan Zinc limited operates a Pb-Zn beneficiation plant having a capacity of around 3000 tpd at Rajpura Dariba mine. The beneficiation circuit consists of 3 parallel streams each of 800 tpd capacity and produces lead and zinc concentrates. The ore from this mine is reported to be complex in nature. The sulphides of lead-zinc from this deposit are hosted by calc-silicate (CS) and graphite mica schist (GSM) rock types. The extreme variability of the physicochemical properties of the ore and wide variations in the grade of mill feed created
metallurgical problems due to which the desired products could not be obtained on sustained basis
A formulation for the boundary-layer equations in general coordinates
This is a working paper in which a formulation is given for solving the boundary-layer equations in general body-fitted curvilinear coordinates while retaining the original Cartesian dependent variables. The solution procedure does not require that any of the coordinates be orthogonal, and much of the software developed for many Navier-Stokes schemes can be readily used. A limited number of calculations has been undertaken to validate the approach
- …