8 research outputs found
An overview of research on biolubricants in Malaysia and Japan for tribological applications
Significant research and development is being done to substitute petroleum based lubricants with biolubricants derived from vegetable oils having similar physicochemical properties and tribological characteristics. This paper presents an overview of biolubricants in Malaysia and Japan for tribological applications. Research and development trends on biolubricants are described under the following categories: biolubricants as basestock, biolubricants in mixtures and biolubricants with additives. Excellent lubricant performance is obtained by biolubricant blends with selected additives. Biolubricants having similar performance to petroleum based lubricants, reduce dependence on nonrenewable resources, and increases markets industrial applications
Metal Injection Molding Process Parameters as A Function of Filling Performance of 3D Printed Polymer Mold
Metal injection molding (MIM) is a swift manufacturing process, which can produce complex and intricate parts with good repeatability and accuracy. However, to quickly address low-volume demands of customized MIM parts, manufacturing of mold could be a potential challenge. Typically, machined metal molds are used for MIM, but they are expensive and need more lead time. The machined metal mold becomes useless once the design is changed or requirement of MIM parts is met. Therefore, for MIM production of a low volume of highly customized parts, machined metal mold could be substituted by 3D printed polymer molds. However, knowledge of filling behavior of MIM feedstock in polymer mold is a grey area, which demands study to investigate the effects of injection parameters on mold filling. The present study investigates the effects of machine injection parameters on feedstock filling behavior in 3D printed polymer molds. An attempt has been made to determine the trend of feedstock filling in the polymer mold as a function of injection parameters. Further, the design of experiment (DOE) has been used to estimate the weight of injection parameters
Metal Injection Molding Process Parameters as A Function of Filling Performance of 3D Printed Polymer Mold
Metal injection molding (MIM) is a swift manufacturing process, which can produce complex and intricate parts with good repeatability and accuracy. However, to quickly address low-volume demands of customized MIM parts, manufacturing of mold could be a potential challenge. Typically, machined metal molds are used for MIM, but they are expensive and need more lead time. The machined metal mold becomes useless once the design is changed or requirement of MIM parts is met. Therefore, for MIM production of a low volume of highly customized parts, machined metal mold could be substituted by 3D printed polymer molds. However, knowledge of filling behavior of MIM feedstock in polymer mold is a grey area, which demands study to investigate the effects of injection parameters on mold filling. The present study investigates the effects of machine injection parameters on feedstock filling behavior in 3D printed polymer molds. An attempt has been made to determine the trend of feedstock filling in the polymer mold as a function of injection parameters. Further, the design of experiment (DOE) has been used to estimate the weight of injection parameters
Establishing correlation between leaf spring specifications and camber drop
Manufacturing of leaf spring for automotive application to support heavy load vehicles such lorry and truck is a challenging process. This is due to the difficulty in fabricating the leaf spring exactly as per designed. The difference between the desired leaf spring shape and the actual fabricated shape is known as camber drop. The aim of this study is to establish the correlation between leaf spring specifications, camber drop and its processing parameters. The formulated equation can thus be used to predict the extent of camber drop and required action can be taken to reduce camber drop. This work was conducted by gathering data of variables suspected to influence camber drop, namely quenching camber, half-length of the spring, spring rate and end thickness of the spring. Regression analysis was conducted and the correlation between leaf spring’s specifications and camber drop is given. A mathematical model able to predict the extent of camber drop is formulated.</jats:p
Performance Analysis of Enhanced 3D Printed Polymer Molds for Metal Injection Molding Process
Conventionally, molds for metal injection molding (MIM) process are fabricated using metallic materials using conventional machining processes. Machined metal molds are resilient and therefore could be suitable for mass production of MIM parts. However, with the process of mass production leading to permanent hard tooling, the design is subjected to rigorous testing and iteration before finalization. During design analysis and the iteration process, the demand for MIM parts (part demand) is at low-volume. Therefore, machined metal molds could be costly and time consuming for low volume and customized end-use products. 3D printed molds could be a suitable choice for MIM production for such applications. The present study compares the performance of Fused Deposition Modelling (FDM) 3D printing (3DP) process made polymer molds with an aluminum mold for potential use in MIM process. It was observed that 3DP molds could successfully be used for a limited number of MIM cycles
Synthesis, Surface Nitriding and Characterization of Ti-Nb Modified 316L Stainless Steel Alloy Using Powder Metallurgy
The powder metallurgy (PM) technique has been widely used for producing different alloy compositions by the addition of suitable reinforcements. PM is also capable of producing desireable mechanical and physical properties of the material by varying process parameters. This research investigates the addition of titanium and niobium in a 316L stainless steel matrix for potential use in the biomedical field. The increase of sintering dwell time resulted in simultaneous sintering and surface nitriding of compositions, using nitrogen as the sintering atmosphere. The developed alloy compositions were characterized using OM, FESEM, XRD and XPS techniques for quantification of the surface nitride layer and the nitrogen absorbed during sintering. The corrosion resistance and cytotoxicity assessments of the developed compositions were carried out in artificial saliva solution and human oral fibroblast cell culture, respectively. The results indicated that the nitride layer produced during sintering increased the corrosion resistance of the alloy and the developed compositions are non-cytotoxic. This newly developed alloy composition and processing technique is expected to provide a low-cost solution to implant manufacturing
Microstructure and mechanical properties of modified 316L stainless steel alloy for biomedical applications using powder metallurgy
AISI 316L stainless steel (SS) is one of the extensively used biomaterials to produce implants and medical devices. It provides a low-cost solution with ample mechanical properties, corrosion resistance, and biocompatibility compared to its counterpart materials. However, the implants made of this material are subjected to a short life span in human physiological conditions leading to the leaching of metal ions, thus limiting its use as a biomaterial. In this research, the addition of boron, titanium, and niobium with varying concentrations in the SS matrix has been explored. This paper explores the impact of material composition on modified SS alloy's physical and mechanical properties. The study's outcomes specify that the microhardness increases for all the alloy compositions, with a maximum increase of 64.68% for the 2 wt.% niobium added SS alloy. On the other hand, the tensile strength decreased to 297.40 MPa for the alloy containing 0.25 wt.% boron and 2 wt.% titanium additions compared to a tensile strength of 572.50 MPa for pure SS. The compression strength increased from 776 MPa for pure SS to 1408 MPa for the alloy containing niobium and titanium additions in equal concentrations.Web of Science158art. no. 282