14 research outputs found

    Mapping and Analysis of the Reactive Power Balance in the Danish Transmission Network

    Get PDF
    This paper investigates the reactive power balance of the Zealand side of the Danish transmission system (DK2) by using QV-curves. The study is performed in cooperation with Energinet, who is the Danish transmission system operator (TSO). Firstly, this paper aims to map the reactive power balance with the current challenges in the system, which appears due to a decision of changing overhead lines in the scenic area to cables. Secondly, a method is derived for obtaining a comprehensive overview of the impacts that future projects might have on the system. By dividing the transmission system into smaller areas, it is possible to analyze how the reactive power will affect the voltage; moreover, it is favorable to analyze and handle the challenges in the reactive power balance locally. This helps the TSO to quickly determine the lack of reactive power devices and issues that might occur in future expansions of the system. For this paper, a full-scale model of DK2 and SCADA-data has been utilized. It covers the period from 01-01-2016 to 20-08-2017 between the TSO and the Distribution System Operator (DSO). The studies have shown how the location of the wind production will create issues in the reactive power balance

    Analysis of a radial flux-air-cored permanent magnet machine with a double-sided rotor and non overlapping windings

    Get PDF
    Thesis (PhD)--Stellenbosch University, 2012.ENGLISH ABSTRACT: In this dissertation a new type of electrical machine, a Radial Flux Air-Cored Permanent Magnet machine with a Double-sided Rotor and utilising concentrated, non-overlapping windings, is proposed. The concept of the Double-sided Rotor Radial Flux Air-Cored Permanent Magnet machine, or RFAPM machine for short, was derived from the Double-sided Rotor Axial Flux Air-Cored Permanent Magnet (AFAPM) machine. One of the problems that AFAPM machines experience, is the deflection of the rotor discs due to the strong magnetic pull of the permanent magnets, especially with double-sided rotor machines. The main advantage of a RFAPM machine over a AFAPM machine is that the rotor back-iron is cylindrically shaped instead of disk shaped. Due to the structural integrity of a cylinder, the attraction force between the two rotors does not come into play any more. The focus of this dissertation is on a thorough analytical analysis of the Double-Sided Rotor RFAPM machine. With the RFAPM being an air-cored machine, the feasibility to develop a linear, analytical model, to accurately predict the radial flux-density and hence the induced EMF in the stator windings, as well as the accurate calculation of the developed torque of the machine, needed to be investigated. The need for a thorough analytical examination of the Double-Sided Rotor RFAPM machine stemmed from the need to reduce the blind reliance on Finite Element Modelling (FEM) software to calculate the back-EMF and torque produced by these machines. Another problem experienced with the FEM software was to obtain accurate torque results. Excessive ripple torque oscillations were sometimes experienced which took a considerable amount of time to minimise with constant refinement to the meshing of the machine parts. Reduction in the mesh element size unfortunately also added to the simulation time. The requirement for an accurate analytical model of the RFAPM machine was also necessary in order to reduce the amount of time spent on successive FEM simulation to obtain the optimum pole arc width of the permanent magnet in order to minimise the harmonic content of the radial flux-density distribution in the the stator windings. In this dissertation, the use of single-layer and double-layer, non-overlapping, concentrated winding for the RFAPM machine is also investigated. It was decided to include a comparison of these two non-overlapping winding configurations with a “hypothetical” concentrated, overlapping winding configuration. This would allow us to gauge the effectiveness of using nonoverlapping winding with respect to the reduction in copper losses as well as in the reduction in copper volume. It would also allow us to investigate the extent of how much the developed torque is affected by using non-overlapping windings instead of overlapping windings.AFRIKAANSE OPSOMMING: In hierdie proefskrif word ’n nuwe tipe elektriese masjien, ’n Radiale-vloed Lugkern Permanent Magneet Masjien met ’n dubbelkantige rotor en nie-oorvleuelende Windings voorgestel. Die konsep vir die Radiale-vloed Lugkern Permanent Magneet Masjien, of RVLPM vir kort, is afgelei vanaf die Dubbelkantige Rotor, Aksiale-vloed Lugkern (AVLPM) masjien. Een van die probleme wat met AVLPM masjiene ondervind word, is die defleksie van die rotorjukke as gevolg van die sterk aantrekkingskragte van die permanente magnete, veral in dubbelkantige rotor masjiene. Die hoof voordeel wat die RVLPM masjien inhou bo die AVLPM masjien, is die feit dat die RVLPM se rotorjukke silindries is in plaas van ronde skywe. As gevolg van die strukturele integriteit van ’n silinders, speel die aantrekkingskrag van die permanente magnete nie meer ’n rol nie. Die fokus van die proefskrif gaan oor die deeglike analitiese analise van die dubbelkantige RVLPM masjien. Weens die feit dat die RVLPM masjien ’n lugkern masjien is, is daar besluit om ondersoek in te stel na die moontlikheid om ’n lineĂȘre, analitiese model vir die masjien op te stel waarmee die radiale-vloeddigtheid, teen-EMK asook die ontwikkelde draaimoment vir die masjien akkuraat bereken kan word. Die behoefde aan ’n akkurate analitiese model vir die dubbelkantige rotor RVLPM masjien is om die blinde vertroue te elimineer wat daar in Eindige-Element Modellering (EEM) sagteware gestel word om die teen-EMK en ontwikkelde draaimoment van die RVLPM masjien uit te werk. ’n Verdere probleem wat daar met EEM sagteware ondervind is, is die akkurate berekening van die ontwikkelde draaimoment. Oormatige rimpel draaimoment ossillasies is soms ondervind wat heelwat tyd geverg het om te minimeer, deur voortdurende verfyning van die EEM maas in die verskillende dele van die masjien. Soos die maas egter kleiner word, verleng dit die simulasie tyd van die EEM aansienlik. Nog ’n rede vir ’n akkurate analitiese model van die RVLPM masjien, is om vinnige metode te verkry om die optimale permanente magneet pool hoekwydte te verkry, wat die minste Totale Harmoniese Vervorming (THV) in die radiale-vloeddigtheidsdistribusie in die statorgebied sal veroorsaak, sonder om herhaaldelike EEM simulasies te loop. In die proefskrif word die gebruik van enkellaag en dubbellaag, nie- oorvleuelende, gekonsentreerde wikkelings vir die RVLPM masjien ook ondersoek. Daar is besluit om hierdie twee nie-oorvleuelende windingskonfigurasies met ’n “hipotetiese” gekonsentreerde, oorvleuelende windingskonfigurasie te vergelyk. Dit behoort ons in staat te stel om die doeltreffendheid van nie-oorvleuelende windings te bepaal, met betrekking tot die afname in koperverliese asook die afname in kopervolume. Verder sal dit ons in staat stel om ook mate waartoe die ontwikkelde draaimoment deur nie-oorvleuelende windings beĂŻnvloed word, te ondersoek

    Inverting DC traction substation with active power filtering incorporated

    No full text
    Thesis (M. Ing.) -- University of Stellenbosch, 1995.One copy microfiche.Full text to be digitised and attached to bibliographic record
    corecore