A Classification Model for Reusable Software Components

TIris paper presents work which has been carried out in the ESF-ROSE project (referred to as ROSE in the remainder of this paper). Funded under the Eureka programme (Eureka is the famous interjection used by Archimedes in his bath and not an acronym), the ESF project (Eureka Software Factory) aims at providing a highly effective software manufacturing environment The use of the wordfactory in the software context has very little connection to traditional assemblyline factories. Instead, a Software Factory is a factory in the modem sense providing Computer Integrated Software Manufacturing with emphasis on integration. A software factory covers the total software production process, including all technical and managerial tasks, with a high degree of automation and resource utilization. The ROSE project is a collaborative effon involving MATRA Espace, the software house Serna Group (France), and the University of Dortmund (Federal Republic of Gennany). Pan of the work on classification is the Ph.D. research of author Eric Rames. The main goals of the ROSE project (Reuse Of SoftwarE) are: • to analyze and to define in a comprehensive way the concept of software reuse; • to develop an environment for the reuse of software components within a factory. A precondition for reuse in software development is the existence of libraries of reusable software components. In order to suppon reuse, the collection must contain not only the components themselves, but also be accessible by a system that provides descriptions of the components and retrieval mechanisms so that users may match their specific requirements against these descriptions. Indexing reusable software components according to a classification scheme allows reusers to have a better understanding and more efficient access to the libraries' contents. Therefore a classification scheme is built so that it represents selection criteria the reuser might have. These indexes would be searchable and keyed to retrievable software descriptions. Based on retrievals, users may then access the actual software. Building such a collection is a domain analysis process [PRI90] that includes activities such as: • Identification of software components that should be reusable and description in terms of reusable software components. • Definition of a classification scheme appropriate for indexing and retrieving the reusable software components. TIris paper focuses on the latter topic and how it is performed in the ROSE project. A case study carried out from the aerospace domain is then presented. A discussion of ongoing and future work will conclude this paper

Simulation of Bose-Einstein effect using space-time aspects of Lund string fragmentation model

The experimentally observed enhancement of number of close boson pairs in e+e- collisions is reproduced by local weighting according to the quantum mechanical prescriptions for production of identical bosons. The space-time picture of the process, inherently present in the Lund fragmentation model, is explicitly used. The model is used to check systematic errors in the W mass measurements due to the Bose-Einstein effect. The possibility of direct implementation of the Bose-Einstein effect into string fragmentation is discussed.Comment: 26 pages, Latex, 17 figures in PS format attache

Automation in Leather Making

Content: In most of the tanneries, water and chemicals are added manually in the tanning drum and pH of the float / leather is adjusted. Addition of correct amount of process recipe are necessary for better processing of the hides and minimizing wastage of utility, thereby controlling pollution load in effluent. However, fugitive-emission from process and drains accumulate ammonia, hydrogen-sulphide and volatile organic compounds which contribute bad odor in tannery as well as in wastewater-treatment premises causing problems to occupational health & safety of workers. Both local and supervisory control stations are employed to monitor and accurately manage the unit operations. The objective of this work is to produce consistent quality of leathers and to provide a healthy environment through automatic dosing and odor abatement system. Therefore the entire process control operation is integrated to operate through PLCs with following five modules: i) Water addition module ii) Chemical preparation and dosing system iii) pH monitoring and float recycle system iv) Drum rotation module v) Odor reduction module. In the integrated system, critical and bulk chemicals are stored in bulk storage tanks and are drawn into the load cell (LC) as per process sequence or recipe for feeding into the drums through auxiliary tanks. The float-recycle system helps to remix & heat the float where a pH electrode is housed to monitor pH online. The pH monitoring system adjusts addition of critical chemicals that indicates automatic end point. The contaminated air inside the tannery is sucked and passed through blower and then through bio-filter. The filtration process is based on the principle that VOCs (in the order of 50-200 ppm) and odors can be biologically treated by naturally occurring microbes. The control parameters monitored are: moisture in the bed and uniformity of media (contaminated air or process liquor). The humidity and temperature of inlet media is controlled and contact time with microbes is 10-30 secs. Moisture is controlled to maintain microbial population. A lead in laboratory scale has been developed to measure process variables (PV) considering their spatial distribution in two dimensions. Spatial distribution of process variables inside hides (across cross section) may provide accurate measurement of through reconstruction of image and data driven models using artificial intelligence tools. Computational intelligence is developed for updation of model parameters as that can be used for direct estimation of PV Take-Away: 1. Cleaner production is provided through automation of dosing & pH monitoring using PLC in indegeneous way 2. Pollution Load in exit stream and odor-gas emmision are minimized 3. Artificial Intelligence and data analytics techniques are used in Leather makin

Thermal oxydation during extrusion of polyolefins

International audienceThe thermal oxidation during extrusion of polyethylene was studied under inert gas (nitrogen and CO2) and compared with extrusion under air atmosphere. A strong reduction of degradation rate was found by optical observation and by infrared analyses. A mechanism for the change of color is proposed

Factors associated with the suppressiveness of sugarcane soils to plant-parasitic nematodes

Observations in three Australian sugarcane fields suggested that the soil just under the trash blanket (the covering of crop residue that remains on the soil surface after crops are harvested) was suppressive to plant-parasitic nematodes. Roots were concentrated in this upper layer of soil but plant-parasitic nematode populations were relatively low and roots showed few signs of nematode damage. Root biomass was much lower 15 cm further down the soil profile, where root health was poor and populations of plant-parasitic nematodes were 3-5 times higher than near the soil surface. A bioassay in which Radopholus similis (a nematode that does not occur in sugarcane soils) was inoculated into heat-sterilized and untreated soils, confirmed that biological factors were limiting nematode populations in some of the soils, with soil from 0-2 cm much more suppressive than soil from 15-17 cm. Surface soil from one site was highly suppressive, as only 16% of R. similis recoverable from heated soil were retrieved from this soil after 8 days. Numerous soil chemical, biochemical, and biological properties were measured, and non-linear regression analysis identified two major groups of factors that were significantly associated with suppressiveness. One group reflected the amount of organic matter in soil (total C, total N, and labile C) and the other was associated with the size of the free-living nematode community (total numbers of free-living nematodes, and numbers of plant associates, bacterial feeders, fungal feeders, and carnivores). These results suggested that suppressiveness was biologically mediated and was sustained by C inputs from crop residues and roots. Since nematode-trapping fungi in the test soils could not be quantified using traditional dilution plating methods, their possible role as suppressive agents was assessed by generating TRFLP profiles with Orbiliales-specific primers, and by sequencing cloned PCR products. Although the molecular data were obtained from a limited number of samples, the level of suppression was significantly correlated to the number of Orbiliales clone groups and was also related to the number of Orbiliales species and TRFs, suggesting that this group of fungi may have been one of the suppressive factors operating in the test soils