Report of the Workshop on Next-Generation Space PV: Thin Films

A workshop on the future use of thin-film photovoltaic devices in space power was convened at the 16th Space Photovoltaic Research and Technology Conference held at the NASA Glenn Research Center in Cleveland, OH. This workshop began by addressing: 1) What are the leading impediments or technological challenges to be overcome with regard to the use of thin-film PV in space? 2) What is the status of organic based cells? Will they have a role in space PV, if so when? and 3) What about an integrated PV/Li battery array-up and down sides? A discussion on these three questions pertaining to future use of thin film devices for space power systems is presente

Electrodeposited CuInSe2 Thin Film Junctions

We have investigated thin films and junctions based on copper indium diselenide (CIS) which have been grown by electrochemical deposition. CIS is a leading candidate for use in polycrystalline thin film photovoltaic solar cells. Electrodeposition is a cost-effective method for producing thin-film CIS. We have produced both p and n type CIS thin films from the same aqueous solution by simply varying the deposition potential. A CIS pn junction was deposited using a step-function potential. Stoichiometry of the single layer films was determined by energy dispersive spectroscopy. Carrier densities of these films increased with deviation from stoichiometry, as determined by the capacitance versus voltage dependence of Schottky contacts. Optical bandgaps for the single layer films as determined by transmission spectroscopy were also found to increase with deviation from stoichiometry. Rectifying current versus voltage characteristics were demonstrated for the Schottky barriers and for the pn junction

High Temperature Thermopower in La_{2/3}Ca_{1/3}MnO_3 Films: Evidence for Polaronic Transport

Thermoelectric power, electrical resistivity and magnetization experiments, performed in the paramagnetic phase of La_{2/3}Ca_{1/3}MnO_3, provide evidence for polaron-dominated conduction in CMR materials. At high temperatures, a large, nearly field-independent difference between the activation energies for resistivity (rho) and thermopower (S), a characteristic of Holstein Polarons, is observed, and ln(rho) ceases to scale with the magnetization. On approaching T_c, both energies become field-dependent, indicating that the polarons are magnetically polarized. Below T_c, the thermopower follows a law S(H) prop. 1/rho (H) as in non saturated ferromagnetic metals.Comment: 10 pages, 5 .gif figures. Phys. Rev B (in press

Electrical Characterization of Defects in SiC Schottky Barriers

We have been investigating the effect of screw dislocation and other structural defects on the electrical properties of SiC. SiC is a wide-bandgap semiconductor that is currently received much attention due to its favorable high temperature behavior and high electric field breakdown strength. Unfortunately, the current state-of-the-art crystal growth and device processing methods produce material with high defect densities, resulting in a limited commercial viabilit

Small-polaron hopping conductivity in bilayer manganite La1.2_{1.2}Sr1.8_{1.8}Mn2_{2}O7_{7}

We report anisotropic resistivity measurements on a La$_{1.2}$Sr$_{1.8}$Mn$_{2}$O$_{7}$ single crystal over a temperature $T$ range from 2 to 400 K and in magnetic fields $H$ up to 14 T. For $T\geq 218$ K, the temperature dependence of the zero-field in-plane $\rho_{ab}(T)$ resistivity obeys the adiabatic small polaron hopping mechanism, while the out-of-plane $\rho_{c}(T)$ resistivity can be ascribed by an Arrhenius law with the same activation energy. Considering the magnetic character of the polarons and the close correlation between the resistivity and magnetization, we developed a model which allows the determination of $\rho_{ab,c}(H,T)$. The excellent agreement of the calculations with the measurements indicates that small polarons play an essential role in the electrical transport properties in the paramagnetic phase of bilayer manganites.Comment: 4 pages, 3 figures, to appear in Physical Review

From Bench Top to Market: Growth of Multi-Walled Carbon Nanotubes by Injection CVD Using Fe Organometallics - Production of a Commercial Reactor

Preferential oriented multiwalled carbon nanotubes were prepared by the injection chemical vapor deposition (CVD) method using either cyclopentadienyliron dicarbonyl dimer or cyclooctatetraene iron tricarbonyl as the iron catalyst source. The catalyst precursors were dissolved in toluene as the carrier solvent for the injections. The concentration of the catalyst was found to influence both the growth (i.e., MWNT orientation) of the nanotubes, as well as the amount of iron in the deposited material. As deposited, the multiwalled carbon nanotubes contained as little as 2.8% iron by weight. The material was deposited onto tantalum foil and fused silica substrates. The nanotubes were characterized by scanning electron microscopy, transmission electron microscopy, Raman spectroscopy and thermogravimetric analysis. This synthetic route provides a simple and scalable method to deposit MWNTs with a low defect density, low metal content and a preferred orientation. Subsequently, a small start-up was founded to commercialize the deposition equipment. The contrast between the research and entrepreneurial environments will be discussed

Strain effect on electronic transport and ferromagnetic transition temperature in La0.9_{0.9}Sr0.1_{0.1}MnO3_{3} thin films

We report on a systematic study of strain effects on the transport properties and the ferromagnetic transition temperature $T_{c}$ of high-quality La$_{0.9}$Sr$_{0.1}$MnO$_{3}$ thin films epitaxially grown on (100) SrTiO$_{3}$ substrates. Both the magnetization and the resistivity are critically dependent on the film thickness. $T_{c}$ is enhanced with decreasing the film thickness due to the compressive stain produced by lattice mismatch. The resistivity above 165 K of the films with various thicknesses is consistent with small polaronic hopping conductivity. The polaronic formation energy $E_{P}$ is reduced with the decrease of film thickness. We found that the strain dependence of $T_{c}$ mainly results from the strain-induced electron-phonon coupling. The strain effect on $E_{P}$ is in good agreement with the theoretical predictions.Comment: 6 pages and 5 figures, accepted for publication in Phys. Rev.

Charge identification of fragments with the emulsion spectrometer of the FOOT experiment

The FOOT (FragmentatiOn Of Target) experi- ment is an international project designed to carry out the fragmentation cross-sectional measurements relevant for charged particle therapy (CPT), a technique based on the use of charged particle beams for the treatment of deep-seated tumors. The FOOT detector consists of an electronic setup for the identification of Z >= 3 fragments and an emulsion spectrometer for Z <= 3 fragments. The first data taking was performed in 2019 at the GSI facility(Darmstadt, Germany). In this study, the charge identifi-cation of fragments induced by exposing an emulsion detector, embedding a C2H4 target, to an oxygen ion beam of 200 MeV/n is discussed. The charge identifica-tion is based on the controlled fading of nuclear emulsions in order to extend their dynamic range in the ionization response

Science and Technology Perspectives on R&D Partnerships

Description of capabilities of the National Center for Photovoltaics, its focus on PV technology innovations that drive PV industry growth, and methods employed for collaborating with universities and industry