Effect of Collagen Crosslinkers on Dentin Bond Strength of Adhesive Systems: A Systematic Review and Meta-Analysis

This study aimed to identify the role of crosslinking agents in the resin-dentin bond strength (BS) when used as modifiers in adhesives or pretreatments to the dentin surface through a systematic review and meta-analysis. This paper was conducted according to the directions of the PRISMA 2020 statement. The research question of this review was: "Would the use of crosslinkers agents improve the BS of resin-based materials to dentin?" The literature search was conducted in the following databases: Embase, PubMed, Scielo, Scopus, and Web of Science. Manuscripts that reported the effect on the BS after the use of crosslinking agents were included. The meta-analyses were performed using Review Manager v5.4.1. The comparisons were performed by comparing the standardized mean difference between the BS values obtained using the crosslinker agent or the control group. The subgroup comparisons were performed based on the adhesive strategy used (total-etch or self-etch). The immediate and long-term data were analyzed separately. A total of 50 articles were included in the qualitative analysis, while 45 articles were considered for the quantitative analysis. The meta-analysis suggested that pretreatment with epigallocatechin-3-gallate (EGCG), carbodiimide, ethylenediaminetetraacetic acid (EDTA), glutaraldehyde, and riboflavin crosslinking agents improved the long-term BS of resin composites to dentin (p ≤ 0.02). On the other hand, the use of proanthocyanidins as a pretreatment improved both the immediate and long-term BS values (p ≤ 0.02). When incorporated within the adhesive formulation, only glutaraldehyde, riboflavin, and EGCG improved the long-term BS to dentin. It could be concluded that the application of different crosslinking agents such as carbodiimide, EDTA, glutaraldehyde, riboflavin, and EGCG improved the long-term BS of adhesive systems to dentin. This effect was observed when these crosslinkers were used as a separate step and when incorporated within the formulation of the adhesive system

Complicated Crown Fracture of Permanent Incisors: A Conservative Treatment Case Report and a Narrative Review

Dental trauma may have a severe impact on the social and psychological wellbeing of a patient. Most cases of dental injuries involve anterior teeth, especially the maxillary upper incisors. Crown fractures, with or without pulp exposure, are the most common trauma in permanent dentition. There are many methods of management, in which the initial state of the pulp, the time since the injury, and the presence of an accompanying injury play a key role. This case report aimed at showing a possible conservative treatment after complicated tooth fracture that consisted of partial pulpotomy followed by adhesive reattachment of the tooth fragment using a technique based on heated resin composite. Such a specific procedure represents a conservative approach to traumatic coronal lesions, providing a suitable opportunity to maintain the tooth vitality, aesthetics, and function. Indeed, reattachment of tooth fragment using a composite/adhesive is a simple technique to achieve excellent results in terms of aesthetic and function

Evaluation of Size and Location of a Mental Foramen in the Polish Population Using Cone-Beam Computed Tomography

Introduction. The mental foramen (MF) is a bilateral opening localized on an anterior surface of the mandible. A precise location as well as well-defined shape, size, and number of the MF is crucial for different clinical dental procedures. The aim of this study was to determine a size and location of the MF in relation to the lower teeth using the cone-beam computed tomography (CBCT) study. Material and Methods. In a group of 201 patients (106 males and 95 females) the CBCT images were performed using the GX CB-500 device (Gendex, USA). Results. No significant differences in values of the horizontal (H) and vertical (V) diameters as well as the H:V ratio on both sides in relation to the age of participants were found. In males both average values of a horizontal diameter (p=0.031) and vertical diameter (p=0.001) were significantly higher on the right side than in the female subgroup, whereas on the left side only an average value of a vertical diameter was significantly higher in men (p=0.006) in comparison to women. Moreover, the H:V ratio was significantly lower in males on the left side (p=0.032). There were no significant relationships between age and gender of the patients (p>0.05) and the type of mental foramen on the right and left sides. Conclusions. The application of the CBCT study enabled a precise determination of the shape, size, and position of the mental foramen in relation to the neighboring anatomical structures on a representative group of the Polish patients. The results obtained may contribute to guidelines for dental procedures including anesthesia of the mental nerve and endodontic, implantology, and dental surgery with regard to the location of mental foramen depending on the sex and age of patients

The Assessment of Quality of the Root Canal Filling and the Number of Visits Needed for Completing Primary Root Canal Treatment by Operators with Different Experience

The main goal of root canal treatment (RCT) is to eradicate or essentially diminish the microbial population within the root canal system and to prevent reinfection by a proper chemo-mechanical preparation and hermetic final obturation of the root canal space. The aim of this study was to assess the quality of the root canal filling and the number of visits needed for completing RCT by operators with different experience, including dentistry students (4th and 5th year), general dental practitioners (GDPs), and endodontists. Data from medical records of 798 patients were analyzed, obtaining 900 teeth and 1773 obturated canals according to the inclusion and exclusion criteria. A similar number of teeth was assessed in each group in terms of density and length of root canal filling and number of visits. The larger number of visits and the lower quality of treatment was observed for 4th year students than for other groups (p < 0.05); in contrast, the endodontists needed the lowest number of visits to complete RCT and more often overfilled teeth than other operator groups (p < 0.05). Interestingly, no statistical difference in quality of root canal filling was noted between 5th year students, GPDs and endodontists. The treatment of lower teeth demanded statistically more visits than that of upper teeth (p < 0.05). The results of the study emphasize that most of the root canal filling performed by operators was considered adequate, regardless of tooth type, files used and number of visits. Keywords: endodontists; general practicing dentists; root canal treatment; quality; undergraduate student

A Micro-CT Analysis of Initial and Long-Term Pores Volume and Porosity of Bioactive Endodontic Sealers

The evaluation of the porosities within the interface of root canals obturated with endodontics materials is extremely important for the long-term success of endodontic treatments. The aim of this study was to compare initial and long-term volume of pores (total, open, closed) and porosity (total, regional) of three bioactive endodontic sealers: GuttaFlow Bioseal, Total Fill BC Sealer, and BioRoot RCS. Root canals were obturated with three &ldquo;bioactive&rdquo; sealers using the single-cone technique. The volume of open and closed pores and porosity were calculated using a micro-computed tomography (MCT) method. The measurements were performed after 7 days (initial) and after 6 months (long-term) of incubation. Statistical significance was considered at p &lt; 0.05. The total volume of pores remained unchanged after the 6-month storage. GuttaFlow Bioseal exhibited significantly higher long-term volume in open pores than Total Fill BC Sealer. The total porosity in all the tested sealers presented no statistically significant change after the 6-month storage, except for BioRoot RCS. The total porosity values of this latter material significantly increased after long-term incubation, especially in the apical region. In conclusion, the use of bioactive sealers with excessive tendency to create porosities both in shorth- and long-term periods of storage may compromise the long-term success of endodontic treatments

Cytotoxicity and genotoxicity of bioceramic root canal sealers compared to conventional resin-based sealer

Abstract The aim of this study was to evaluate cytotoxicity and genotoxicity of calcium-silicate based sealers and comparing them with a gold standard—an epoxy-based sealant. Two experimental cell lines were used, gingival fibroblasts (hGF) and monocyte/macrophage peripheral blood cell line (SC). The cytotoxicity (XTT assay) and genotoxicity (comet assay) were evaluated both after 24-h and 48-h incubation. Additionally, after 48-h incubation, the cell apoptosis and cell cycle progression was detected. BioRoot Flow induced a significant decrease in hGF cells viability compared to the negative control groups both after 24-h (p  20% DNA damage). BioRoot Flow and BioRoot RCS, may have potential genotoxic effects and induce apoptosis in hGF cells which may irritate periapical tissues, resulting in a delayed healing. The findings of the study would be useful in selection of an appropriate sealant for root canal filling without causing cytotoxicity and genotoxicity

Micro-CT Evaluation of Microgaps at Implant-Abutment Connection

The assessment of microgaps at the implant–abutment interface is an important factor that may influence clinical success. Thus, the aim of this study was to evaluate the size of microgaps between prefabricated and customised abutments (Astra Tech, Dentsply, York, PA, USA; Apollo Implants Components, Pabianice, Poland) mounted on a standard implant. The measurement of the microgap was performed using micro-computed tomography (MCT). Due to 15-degree rotation of samples, 24 microsections were obtained. Scans were performed at four levels established at the interface between the abutment and the implant neck. Moreover, the volume of the microgap was evaluated. The size of the microgap at all measured levels varied from 0.1 to 3.7 µm for Astra and from 0.1 to 4.9 µm for Apollo (p > 0.05). Moreover, 90% of the Astra specimens and 70% of the Apollo specimens did not exhibit any microgaps. The highest mean values of microgap size for both groups were detected at the lowest portion of the abutment (p > 0.05). Additionally, the average microgap volume was greater for Apollo than for Astra (p > 0.05). It can be concluded that most samples did not exhibit any microgaps. Furthermore, the linear and volumetric dimensions of microgaps observed at the interface between Apollo or Astra abutments and Astra implants were comparable. Additionally, all tested components presented microgaps (if any) that were clinically acceptable. However, the microgap size of the Apollo abutment was higher and more variable than that of the Astra one

Evaluation of Physical–Chemical Properties of Contemporary CAD/CAM Materials with Chromatic Transition “Multicolor”

The use of materials for computer-aided design/computer-aided manufacturing (CAD/CAM) has been rapidly increasing in daily practice. However, one of the main issues regarding modern CAD/CAM materials is their aging in the oral environment, which may lead to significant changes in their overall properties. The aim of this study was to compare the flexural strength, water sorption, cross-link density (softening ratio%), surface roughness, and SEM analysis of three modern CAD/CAM “multicolor” composites. Grandio (Grandio disc multicolor—VOCO GmbH, Cuxhaven, Germany), Shofu (Shofu Block HC—Shofu Inc., Kyoto, Japan), and Vita (Vita Enamic multiColor—Vita Zahnfabrik, Bad Sackingen, Germany) were tested in this study. They were prepared in stick-shaped specimens and submitted to different tests after several aging protocols, such as thermocycling and mechanical cycle loading challenge. Further disc-shaped specimens were also created and tested for water sorption, cross-link density, surface roughness, and SEM ultramorphology, before and after storage in an ethanol-based solution. For flexural strength and ultimate tensile strength, Grandio showed the greatest values both at baseline and after aging (p p p p < 0.05). Despite the comparable modulus of elasticity of Vita and Grandio, this latter showed greater flexural strength and ultimate tensile strength both at baseline and after aging. Hence, Grandio and Vita Enamic may be employed for the anterior teeth and for those restorations requiring load-bearing capacity. Conversely, aging seems to affect several properties of Shofu, so its use for permanent restorations should be well-pondered based on the clinical situation