Evidence for coupling between collective state and phonons in two-dimensional charge-density-wave systems

We report on a Raman scattering investigation of the charge-density-wave (CDW), quasi two-dimensional rare-earth tri-tellurides $R$Te$_3$ ($R$= La, Ce, Pr, Nd, Sm, Gd and Dy) at ambient pressure, and of LaTe$_3$ and CeTe$_3$ under externally applied pressure. The observed phonon peaks can be ascribed to the Raman active modes for both the undistorted as well as the distorted lattice in the CDW state by means of a first principles calculation. The latter also predicts the Kohn anomaly in the phonon dispersion, driving the CDW transition. The integrated intensity of the two most prominent modes scales as a characteristic power of the CDW-gap amplitude upon compressing the lattice, which provides clear evidence for the tight coupling between the CDW condensate and the vibrational modes

Spin Relaxation in Single Layer Graphene with Tunable Mobility

Graphene is an attractive material for spintronics due to theoretical predictions of long spin lifetimes arising from low spin-orbit and hyperfine couplings. In experiments, however, spin lifetimes in single layer graphene (SLG) measured via Hanle effects are much shorter than expected theoretically. Thus, the origin of spin relaxation in SLG is a major issue for graphene spintronics. Despite extensive theoretical and experimental work addressing this question, there is still little clarity on the microscopic origin of spin relaxation. By using organic ligand-bound nanoparticles as charge reservoirs to tune mobility between 2700 and 12000 cm2/Vs, we successfully isolate the effect of charged impurity scattering on spin relaxation in SLG. Our results demonstrate that while charged impurities can greatly affect mobility, the spin lifetimes are not affected by charged impurity scattering.Comment: 13 pages, 5 figure

What is the Shape Effect on the (Hyper)polarizabilities? A Comparison Study on the Moebius, Cyclic, and Linear Nitrogen-Substituted Polyacenes

How does the framework shape influence the static polarizability (alpha_0) and the first hyperpolarizability (beta_0)? This work, for the first time, presents a comparison study at the MP2/6-31+G(d) level, by using the nitrogen-substituted polyacenes as models: the Moebius strip with a knot, the cyclic strip without knot, and the linear strip. Opening the knot of the Moebius strip to form the cyclic strip, it leads to the increase of the alpha_0 from 268 au to 323 au and the beta_0 value increases about three times from 393 (Moebius) to 1049 au (cyclic). Further, opening the cyclic strip to form the linear strip, the alpha_0 value increases from 323 au to 476 au. While the beta_0 value as well increases about three times from 1049 (cyclic) to 2814 au (linear). The changes in the static (hyper)polarizabilities are well explained by the geometrical differences among the Moebius, cyclic, and linear nitrogen-substituted polyacenes.Comment: 10 pages, 3 figure

CRITICAL ANALYSIS OF EXISTING RECYCLABILITY ASSESSMENT METHODS FOR NEW PRODUCTS IN ORDER TO DEFINE A REFERENCE METHOD

The designers of products subject to the European regulations on waste have an obligation to improve the recyclability of their products from the very first design stages. The statutory texts refer to ISO standard 22 628, which proposes a method to calculate vehicle recyclability. There are several scientific studies that propose other calculation methods as well. Yet the feedback from the CREER club, a group of manufacturers and suppliers expert in ecodesign and recycling, is that the product recyclability calculation method proposed in this standard is not satisfactory, since only a mass indicator is used, the calculation scope is not clearly defined, and common data on the recycling industry does not exist to allow comparable calculations to be made for different products. For these reasons, it is difficult for manufacturers to have access to a method and common data for calculation purposes. A critical analysis of the standard and the various calculation methods identified in scientific journals was performed. An initial discussion brought to light several possible scopes of calculation. Additional indicators, such as quality loss or economic value loss, would be complementary to the mass indicator. Case studies were performed to compare these different methods. A new method and its scope of calculation are proposed in order to develop a reference method.CREE

Evidence for coupling between collective state and phonons in two-dimensional charge-density-wave systems

We report on a Raman scattering investigation of the charge-density-wave (CDW), quasi two-dimensional rare-earth tri-tellurides RTe{sub 3} (R = La, Ce, Pr, Nd, Sm, Gd and Dy) at ambient pressure, and of LaTe{sub 3} and CeTe{sub 3} under externally applied pressure. The observed phonon peaks can be ascribed to the Raman active modes for both the undistorted as well as the distorted lattice in the CDW state by means of a first principles calculation. The latter also predicts the Kohn anomaly in the phonon dispersion, driving the CDW transition. The integrated intensity of the two most prominent modes scales as a characteristic power of the CDW-gap amplitude upon compressing the lattice, which provides clear evidence for the tight coupling between the CDW condensate and the vibrational modes

Intrinsic efficiency limits in low-bandgap non-fullerene acceptor organic solar cells

In bulk heterojunction (BHJ) organic solar cells (OSCs) both the electron affinity (EA) and ionization energy (IE) offsets at the donor–acceptor interface should equally control exciton dissociation. Here, we demonstrate that in low-bandgap non-fullerene acceptor (NFA) BHJs ultrafast donor-to-acceptor energy transfer precedes hole transfer from the acceptor to the donor and thus renders the EA offset virtually unimportant. Moreover, sizeable bulk IE offsets of about 0.5 eV are needed for efficient charge transfer and high internal quantum efficiencies, since energy level bending at the donor–NFA interface caused by the acceptors’ quadrupole moments prevents efficient exciton-to-charge-transfer state conversion at low IE offsets. The same bending, however, is the origin of the barrier-less charge transfer state to free charge conversion. Our results provide a comprehensive picture of the photophysics of NFA-based blends, and show that sizeable bulk IE offsets are essential to design efficient BHJ OSCs based on low-bandgap NFAs

Relativistic quantum dynamics of a charged particle in cosmic string spacetime in the presence of magnetic field and scalar potential

In this paper we analyze the relativistic quantum motion of charged spin-0 and spin-1/2 particles in the presence of a uniform magnetic field and scalar potentials in the cosmic string spacetime. In order to develop this analysis, we assume that the magnetic field is parallel to the string and the scalar potentials present a cylindrical symmetry with their center on the string. Two distinct configurations for the scalar potential, $S(r)$, are considered: $(i)$ the potential proportional to the inverse of the polar distance, i.e., $S\propto1/r$, and $(ii)$ the potential proportional to this distance, i.e., $S\propto r$. The energy spectra are explicitly computed for different physical situations and presented their dependences on the magnetic field strength and scalar coupling constants.Comment: New version with 20 pages and no figure. Some minor revisions and six references added. Accepted for publication in EJP

Catalysis over zinc-incorporated berlinite (ZnAlPO4) of the methoxycarbonylation of 1,6-hexanediamine with dimethyl carbonate to form dimethylhexane-1,6-dicarbamate

<p>Abstract</p> <p>Background</p> <p>The alkoxycarbonylation of diamines with dialkyl carbonates presents promising route for the synthesis of dicarbamates, one that is potentially 'greener' owing to the lack of a reliance on phosgene. While a few homogeneous catalysts have been reported, no heterogeneous catalyst could be found in the literature for use in the synthesis of dicarbamates from diamines and dialkyl carbonates. Because heterogeneous catalysts are more manageable than homogeneous catalysts as regards separation and recycling, in our study, we hydrothermally synthesized and used pure berlinite (AlPO₄) and zinc-incorporated berlinite (ZnAlPO₄) as heterogeneous catalysts in the production of dimethylhexane-1,6-dicarbamate from 1,6-hexanediamine (HDA) and dimethyl carbonate (DMC). The catalysts were characterized by means of XRD, FT-IR and XPS. Various influencing factors, such as the HDA/DMC molar ratio, reaction temperature, reaction time, and ZnAlPO₄/HDA ratio, were investigated systematically.</p> <p>Results</p> <p>The XRD characterization identified a berlinite structure associated with both the AlPO₄and ZnAlPO₄catalysts. The FT-IR result confirmed the incorporation of zinc into the berlinite framework for ZnAlPO₄. The XPS measurement revealed that the zinc ions in the ZnAlPO₄structure possessed a higher binding energy than those in ZnO, and as a result, a greater electron-attracting ability. It was found that ZnAlPO₄catalyzed the formation of dimethylhexane-1,6-dicarbamate from the methoxycarbonylation of HDA with DMC, while no activity was detected on using AlPO₄. Under optimum reaction conditions (i.e. a DMC/HDA molar ratio of 8:1, reaction temperature of 349 K, reaction time of 8 h, and ZnAlPO₄/HDA ratio of 5 (mg/mmol)), a yield of up to 92.5% of dimethylhexane-1,6-dicarbamate (with almost 100% conversion of HDA) was obtained. Based on these results, a possible mechanism for the methoxycarbonylation over ZnAlPO₄was also proposed.</p> <p>Conclusion</p> <p>As a heterogeneous catalyst ZnAlPO₄berlinite is highly active and selective for the methoxycarbonylation of HDA with DMC. We propose that dimethylhexane-1,6-dicarbamate is formed <it>via </it>a catalytic cycle, which involves activation of the DMC by a key active intermediate species, formed from the coordination of the carbonyl oxygen with Zn(II), as well as a reaction intermediate formed from the nucleophilic attack of the amino group on the carbonyl carbon.</p

PDE 7 Inhibitors: New Potential Drugs for the Therapy of Spinal Cord Injury

BACKGROUND: Primary traumatic mechanical injury to the spinal cord (SCI) causes the death of a number of neurons that to date can neither be recovered nor regenerated. During the last years our group has been involved in the design, synthesis and evaluation of PDE7 inhibitors as new innovative drugs for several neurological disorders. Our working hypothesis is based on two different facts. Firstly, neuroinflammation is modulated by cAMP levels, thus the key role for phosphodiesterases (PDEs), which hydrolyze cAMP, is undoubtedly demonstrated. On the other hand, PDE7 is expressed simultaneously on leukocytes and on the brain, highlighting the potential crucial role of PDE7 as drug target for neuroinflammation. METHODOLOGY/PRINCIPAL FINDINGS: Here we present two chemically diverse families of PDE7 inhibitors, designed using computational techniques such as virtual screening and neuronal networks. We report their biological profile and their efficacy in an experimental SCI model induced by the application of vascular clips (force of 24 g) to the dura via a four-level T5-T8 laminectomy. We have selected two candidates, namely S14 and VP1.15, as PDE7 inhibitors. These compounds increase cAMP production both in macrophage and neuronal cell lines. Regarding drug-like properties, compounds were able to cross the blood brain barrier using parallel artificial membranes (PAMPA) methodology. SCI in mice resulted in severe trauma characterized by edema, neutrophil infiltration, and production of a range of inflammatory mediators, tissue damage, and apoptosis. Treatment of the mice with S14 and VP1.15, two PDE7 inhibitors, significantly reduced the degree of spinal cord inflammation, tissue injury (histological score), and TNF-α, IL-6, COX-2 and iNOS expression. CONCLUSIONS/SIGNIFICANCE: All these data together led us to propose PDE7 inhibitors, and specifically S14 and VP1.15, as potential drug candidates to be further studied for the treatment of SCI

The bacterial community structure in an alkaline saline soil spiked with anthracene

Background: The application of polycyclic aromatic hydrocarbons (PAHs) will affect the bacterial community structure as some groups will be favoured and others not. An alkaline saline soil with electrolytic conductivity (EC) 56 dS m-1 was spiked with anthracene and acetone while their effect on bacterial community structure was investigated. Results: The percentages of Acidobacteria and Actinobacteria decreased over time, while the percentage of Proteobacteria, mostly Xanthomonadales, increased. The percentage of the phylotypes belonging to the Nocardioides , Rhodococcus and Streptomyces , known degraders of PAHs, was larger in the anthracene-amended soil than in the acetone-amended and unamended soil at day 14. The phylotypes belonging to the genera Sphingomonas , also a known degrader of PAHs, however, was lower. Weighted and unweighted PCoA with UniFrac indicated that phylotypes were similar in the different treatments at day 0, but changed at day 1. After 14 days, phylotypes in the unamended and acetone-amended soil were similar, but different from those in the anthracene-spiked soil. Conclusions: It was found that incubating the soil and contaminating it with anthracene changed the bacterial community structure, but spiking the soil with acetone had little or no effect on the bacterial community structure compared to the unamended soil