22,238 research outputs found
WHAM Observations of H-Alpha, [S II], and [N II] toward the Orion and Perseus Arms: Probing the Physical Conditions of the Warm Ionized Medium
A large portion of the Galaxy (l = 123 deg to 164 deg, b = -6 deg to -35
deg), which samples regions of the Local (Orion) spiral arm and the more
distant Perseus arm, has been mapped with the Wisconsin H-Alpha Mapper (WHAM)
in the H-Alpha, [S II] 6716, and [N II] 6583 lines. Several trends noticed in
emission-line investigations of diffuse gas in other galaxies are confirmed in
the Milky Way and extended to much fainter emission. We find that the [S
II]/H-Alpha and [N II]/H-Alpha ratios increase as absolute H-Alpha intensities
decrease. For the more distant Perseus arm emission, the increase in these
ratios is a strong function of Galactic latitude and thus, of height above the
Galactic plane. The [S II]/[N II] ratio is relatively independent of H-Alpha
intensity. Scatter in this ratio appears to be physically significant, and maps
of it suggest regions with similar ratios are spatially correlated. The Perseus
arm [S II]/[N II] ratio is systematically lower than Local emission by 10%-20%.
With [S II]/[N II] fairly constant over a large range of H-Alpha intensities,
the increase of [S II]/H-Alpha and [N II]/H-Alpha with |z| seems to reflect an
increase in temperature. Such an interpretation allows us to estimate the
temperature and ionization conditions in our large sample of observations. We
find that WIM temperatures range from 6,000 K to 9,000 K with temperature
increasing from bright to faint H-Alpha emission (low to high [S II]/H-Alpha
and [N II]/H-Alpha) respectively. Changes in [S II]/[N II] appear to reflect
changes in the local ionization conditions (e.g. the S+/S++ ratio). We also
measure the electron scale height in the Perseus arm to be 1.0+/-0.1 kpc,
confirming earlier, less accurate determinations.Comment: 28 pages, 10 figures. Figures 2 and 3 are full color--GIFs provided
here, original PS figures at link below. Accepted for publication in ApJ.
More information about the WHAM project can be found at
http://www.astro.wisc.edu/wham/ . REVISION: Figure 6, bottom panel now
contains the proper points. No other changes have been mad
Estimating monthly-averaged air-sea transfers of heat and momentum using the bulk aerodynamic method
Air-sea transfers of sensible heat, latent heat, and momentum are computed from twenty-five years of middle-latitude and subtropical ocean weather ship data in the North Atlantic and North Pacific using the bulk aerodynamic method. The results show that monthly-averaged wind speeds, temperatures, and humidities can be used to estimate the monthly-averaged sensible and latent heat fluxes computed from the bulk aerodynamic equations to within a relative error of approximately 10%. The estimate of monthly-averaged wind stress under the assumption of neutral stability are shown to be within approximately 5% of the monthly-averaged non-neutral values
Preliminary assessment of systems for deriving liquid and gaseous fuels from waste or grown organics
The overall feasibility of the chemical conversion of waste or grown organic matter to fuel is examined from the technical, economic, and social viewpoints. The energy contribution from a system that uses waste and grown organic feedstocks is estimated as 4 to 12 percent of our current energy consumption. Estimates of today's market prices for these fuels are included. Economic and social issues are as important as technology in determining the feasibility of such a proposal. An orderly program of development and demonstration is recommended to provide reliable data for an assessment of the viability of the proposal
A preliminary assessment of the feasibility of deriving liquid and gaseous fuels from grown and waste organics
The anticipated depletion of our resources of natural gas and petroleum in a few decades has caused a search for renewable sources of fuel. Among the possibilities is the chemical conversion of waste and grown organic matter into gaseous or liquid fuels. The overall feasibility of such a system is considered from the technical, economic, and social viewpoints. Although there are a number of difficult problems to overcome, this preliminary study indicates that this option could provide between 4 and 10 percent of the U.S. energy needs. Estimated costs of fuels derived from grown organic material are appreciably higher than today's market price for fossil fuel. The cost of fuel derived from waste organics is competitive with fossil fuel prices. Economic and social reasons will prohibit the allocation of good food producing land to fuel crop production
Literature survey of properties of synfuels derived from coal
A literature survey of the properties of synfuels for ground-based gas turbine applications is presented. Four major concepts for converting coal into liquid fuels are described: solvent extraction, catalytic liquefaction, pyrolysis, and indirect liquefaction. Data on full range syncrudes, various distillate cuts, and upgraded products are presented for fuels derived from various processes, including H-coal, synthoil, solvent-refined coal, donor solvent, zinc chloride hydrocracking, co-steam, and flash pyrolysis. Some typical ranges of data for coal-derived low Btu gases are also presented
HEAT TRANSFER WITH LAMINAR FLOW IN CONCENTRIC ANNULI WITH CONSTANT AND VARIABLE WALL TEMPERATURE AND HEAT FLUX
Heat transfer with laminar flow in concentric annuli with constant and variable wall temperature and heat flu
Dynamic behavior of an unsteady trubulent boundary layer
Experiments on an unsteady turbulent boundary layer are reported in which the upstream portion of the flow is steady (in the mean) and in the downstream region, the boundary layer sees a linearly decreasing free stream velocity. This velocity gradient oscillates in time, at frequencies ranging from zero to approximately the bursting frequency. For the small amplitude, the mean velocity and mean turbulence intensity profiles are unaffected by the oscillations. The amplitude of the periodic velocity component, although as much as 70% greater than that in the free stream for very low frequencies, becomes equal to that in the free stream at higher frequencies. At high frequencies, both the boundary layer thickness and the Reynolds stress distribution across the boundary layer become frozen. The behavior at higher amplitude is quite similar. At sufficiently high frequencies, the boundary layer thickness remains frozen at the mean value over the oscillation cycle, even though flow reverses near the wall during a part of the cycle
The Surveyor 5, 6, and 7 Flight Paths and Their Determination from Tracking Data
Surveyor 5, 6, and 7 flight paths and tracking data for space station location
Evaluation of subgrid-scale turbulence models using a fully simulated turbulent flow
An exact turbulent flow field was calculated on a three-dimensional grid with 64 points on a side. The flow simulates grid-generated turbulence from wind tunnel experiments. In this simulation, the grid spacing is small enough to include essentially all of the viscous energy dissipation, and the box is large enough to contain the largest eddy in the flow. The method is limited to low-turbulence Reynolds numbers, in our case R sub lambda = 36.6. To complete the calculation using a reasonable amount of computer time with reasonable accuracy, a third-order time-integration scheme was developed which runs at about the same speed as a simple first-order scheme. It obtains this accuracy by saving the velocity field and its first-time derivative at each time step. Fourth-order accurate space-differencing is used
- …