13,478 research outputs found

    School violence, school differences and school discourses

    Get PDF
    This article highlights one strand of a study which investigated the concept of the violenceresilient school. In six inner-city secondary schools, data on violent incidents in school and violent crime in the neighbourhood were gathered, and compared with school practices to minimise violence, accessed through interviews. Some degree of association between the patterns of behaviour and school practices was found: schools with a wider range of wellconnected practices seemed to have less difficult behaviour. Interviews also showed that the different schools had different organisational discourses for construing school violence, its possible causes and the possible solutions. Differences in practices are best understood in connection with differences in these discourses. Some of the features of school discourses are outlined, including their range, their core metaphor and their silences. We suggest that organisational discourse is an important concept in explaining school effects and school differences, and that improvement attempts could have clearer regard to this concept

    In-situ measurements of the optical absorption of dioxythiophene-based conjugated polymers

    Full text link
    Conjugated polymers can be reversibly doped by electrochemical means. This doping introduces new sub-bandgap optical absorption bands in the polymer while decreasing the bandgap absorption. To study this behavior, we have prepared an electrochemical cell allowing measurements of the optical properties of the polymer. The cell consists of a thin polymer film deposited on gold-coated Mylar behind which is another polymer that serves as a counterelectrode. An infrared transparent window protects the upper polymer from ambient air. By adding a gel electrolyte and making electrical connections to the polymer-on-gold films, one may study electrochromism in a wide spectral range. As the cell voltage (the potential difference between the two electrodes) changes, the doping level of the conjugated polymer films is changed reversibly. Our experiments address electrochromism in poly(3,4-ethylene-dioxy-thiophene) (PEDOT) and poly(3,4-dimethyl-propylene-dioxy-thiophene) (PProDOT-Me2_2). This closed electrochemical cell allows the study of the doping induced sub-bandgap features (polaronic and bipolaronic modes) in these easily oxidized and highly redox switchable polymers. We also study the changes in cell spectra as a function of polymer thickness and investigate strategies to obtain cleaner spectra, minimizing the contributions of water and gel electrolyte features

    Atomic Deuterium Adsorbed on the Surface of Liquid Helium

    Get PDF
    We investigate deuterium atoms adsorbed on the surface of liquid helium in equilibrium with a vapor of atoms of the same species. These atoms are studied by a sensitive optical method based on spectroscopy at a wavelength of 122 nm, exciting the 1S-2P transition. We present a direct measurement of the adsorption energy of deuterium atoms on helium and show evidence for the existence of resonantly enhanced recombination of atoms residing on the surface to molecules.Comment: 6 pages 4 figure

    Jet power extracted from ADAF and the applications to X-ray binaries and radio galaxy FR dichotomy

    Full text link
    We calculate the jet power of the classical Blandford-Znajek(BZ) model and hybrid model developed by Meier based on the global solutions of advection dominated accretion flows (ADAFs) surrounding Kerr black holes. We find that the jet power of the hybrid model is larger than that of the pure BZ model. The jet power will dominate over the accretion power, and the objects will enter into "jet-power-dominated advective systems", when the accretion rate is less than a critical value mdot_c=Mdot_c/Mdot_Edd, where 3*10^-4 < mdot_c < 5*10^-3 is a function of black hole spin parameter. The accretion power will be dominant when mdot<mdot_c and the objects will enter into "accretion-power-dominated advective systems." This is roughly consistent with that constrained from the low/hard-state black hole X-ray binaries (e.g., Fender et al.). We calculate the maximal jet power as a function of black hole mass with the hybrid jet formation model, and find it can roughly reproduce the dividing line of the Ledlow-Owen relation for FR I/FR II dichotomy in the jet power-black hole(BH) mass plane (Q_jet-M_BH) if the dimensionless accretion rate mdot~0.01 and BH spin parameter j~0.9-0.99 are adopted. This accretion rate mdot~0.01 is consistent with that of the critical accretion rate for the accretion mode transition of a standard disk to an ADAF constrained from the state transition of X-ray binaries. Our results imply that most FR I galaxies may be in the ADAF accretion mode similar to the low/hard-state XRBs.Comment: 6 pages, 3 color figures, ApJ in press, edited with ApJ style and English is improved as suggested by Edito

    Blob ejection from advection-dominated accretion flow: observational consequences

    Get PDF
    There is increasing evidence for the presence of an optically thin advection-dominated accretion flow (ADAF) in low luminosity active galactic nuclei and radio-loud quasars. The present paper is devoted to explore the fate of a blob ejected from an ADAF, and to discuss its observational consequences. It is inevitable for the ejected blob to drastically expand into its surroundings. Consequently, it is expected that a group of relativistic electrons should be accelerated, which may lead to nonthermal flares, since a strong shock will be formed by the interaction between the blob and its surroundings. Then the blob cools down efficiently, leading to the appearance of recombination lines about 10510^5s after its ejection from an ADAF. We apply this model to NGC 4258 for some observational prediction, and to PKS 2149--306 for the explanation of observational evidence. Future simultaneous observations of recombination X-ray lines and continuum emission are highly desired to test the present model.Comment: 4 pages in emulateapj.sty, no figure. Accepted by ApJ Letter

    On The Reddening in X-ray Absorbed Seyfert 1 Galaxies

    Get PDF
    There are several Seyfert galaxies for which there is a discrepancy between the small column of neutral hydrogen deduced from X-ray observations and the much greater column derived from the reddening of the optical/UV emission lines and continuum. The standard paradigm has the dust within the highly ionized gas which produces O~VII and O~VIII absorption edges (i.e., a ``dusty warm absorber''). We present an alternative model in which the dust exists in a component of gas in which hydrogen has been stripped, but which is at too low an ionization state to possess significant columns of O~VII and O~VIII (i.e, a ``lukewarm absorber''). The lukewarm absorber is at sufficient radial distance to encompass much of the narrow emission-line region, and thus accounts for the narrow-line reddening, unlike the dusty warm absorber. We test the model by using a combination of photoionization models and absorption edge fits to analyze the combined ROSAT/ASCA dataset for the Seyfert 1.5 galaxy, NGC 3227. We show that the data are well fit by a combination of the lukewarm absorber and a more highly ionized component similar to that suggested in earlier studies. We predict that the lukewarm absorber will produce strong UV absorption lines of N V, C IV, Si IV and Mg II. Finally, these results illustrate that singly ionized helium is an important, and often overlooked, source of opacity in the soft X-ray band (100 - 500 eV).Comment: 17 pages, Latex, includes 1 figure (encapsulated postscript), one additional table in Latex (landscape format), to appear in the Astrophysical Journa

    Low-Temperature Mobility of Surface Electrons and Ripplon-Phonon Interaction in Liquid Helium

    Full text link
    The low-temperature dc mobility of the two-dimensional electron system localized above the surface of superfluid helium is determined by the slowest stage of the longitudinal momentum transfer to the bulk liquid, namely, by the interaction of surface and volume excitations of liquid helium, which rapidly decreases with temperature. Thus, the temperature dependence of the low-frequency mobility is \mu_{dc} = 8.4x10^{-11}n_e T^{-20/3} cm^4 K^{20/3}/(V s), where n_e is the surface electron density. The relation T^{20/3}E_\perp^{-3} << 2x10^{-7} between the pressing electric field (in kV/cm) and temperature (in K) and the value \omega < 10^8 T^5 K^{-5}s^{-1} of the driving-field frequency have been obtained, at which the above effect can be observed. In particular, E_\perp = 1 kV/cm corresponds to T < 70 mK and \omega/2\pi < 30 Hz.Comment: 4 pages, 1 figur

    Iron fluorescence from within the innermost stable orbit of black hole accretion disks

    Get PDF
    The fluorescent iron Ka line is a powerful observational probe of the inner regions of black holes accretion disks. Previous studies have assumed that only material outside the radius of marginal stability can contribute to the observed line emission. Here, we show that fluorescence by material inside the radius of marginal stability, which is in the process of spiralling towards the event horizon, can have a observable influence on the iron line profile and equivalent width. For concreteness, we consider the case of a geometrically thin accretion disk, around a Schwarzschild black hole, in which fluorescence is excited by an X-ray source placed at some height above the disk and on the axis of the disk. Fully relativistic line profiles are presented for various source heights and efficiencies. It is found that the extra line flux generally emerges in the extreme red wing of the iron line, due to the large gravitational redshift experienced by photons from the region within the radius of marginal stability. We apply our models to the variable iron line seen in the ASCA spectrum of the Seyfert nucleus MCG-6-30-15. It is found that the change in the line profile, equivalent width, and continuum normalization, can be well explained as being due to a change in the height of the source above the disk. We discuss the implications of these results for distinguishing rapidly-rotating black holes from slowly rotating holes using iron line diagnostics.Comment: 20 pages, LaTeX. Accepted for publication in Astrophysical Journal. Figures 3 to 7 replaced with corrected versions (previous figures affected by calculational error). Some changes in the best fitting parameter

    Truncated Levy Random Walks and Generalized Cauchy Processes

    Full text link
    A continuous Markovian model for truncated Levy random walks is proposed. It generalizes the approach developed previously by Lubashevsky et al. Phys. Rev. E 79, 011110 (2009); 80, 031148 (2009), Eur. Phys. J. B 78, 207 (2010) allowing for nonlinear friction in wondering particle motion and saturation of the noise intensity depending on the particle velocity. Both the effects have own reason to be considered and individually give rise to truncated Levy random walks as shown in the paper. The nonlinear Langevin equation governing the particle motion was solved numerically using an order 1.5 strong stochastic Runge-Kutta method and the obtained numerical data were employed to calculate the geometric mean of the particle displacement during a certain time interval and to construct its distribution function. It is demonstrated that the time dependence of the geometric mean comprises three fragments following one another as the time scale increases that can be categorized as the ballistic regime, the Levy type regime (superballistic, quasiballistic, or superdiffusive one), and the standard motion of Brownian particles. For the intermediate Levy type part the distribution of the particle displacement is found to be of the generalized Cauchy form with cutoff. Besides, the properties of the random walks at hand are shown to be determined mainly by a certain ratio of the friction coefficient and the noise intensity rather then their characteristics individually.Comment: 7 pages, 3 figure

    A variable efficiency for thin disk black hole accretion

    Get PDF
    We explore the presence of torques at the inner edges of geometrically-thin black hole accretion disks using 3-dimensional magnetohydrodynamic (MHD) simulations in a pseudo-Newtonian potential. By varying the saturation level of the magnetorotational instability that leads to angular momentum transport, we show that the dynamics of gas inside the radius of marginal stability varies depending upon the magnetic field strength just outside that radius. Weak fields are unable to causally connect material within the plunging region to the rest of the disk, and zero torque is an approximately correct boundary condition at the radius of marginal stability. Stronger fields, which we obtain artificially but which may occur physically within more complete disk models, are able to couple at least some parts of the plunging region to the rest of the disk. In this case, angular momentum (and implicitly energy) is extracted from the material in the plunging region. Furthermore, the magnetic coupling to the plunging region can be highly time dependent with large fluctuations in the torque at the radius of marginal stability. This implies varying accretion efficiencies, both across systems and within a given system at different times. The results suggest a possible link between changes in X-ray and outflow activity, with both being driven by transitions between weak and strong field states.Comment: 4 pages, 4 postscript figures. Accepted for publication in Astrophysical Journal Letter
    corecore