820 research outputs found
Recommended from our members
Emissions from village cookstoves in Haryana, India, and their potential impacts on air quality
Air quality in rural India is impacted by residential cooking and heating with biomass fuels. In this study, emissions of CO, CO2, and 76 volatile organic compounds (VOCs) and fine particulate matter (PM2.5) were quantified to better understand the relationship between cook fire emissions and ambient ozone and secondary organic aerosol (SOA) formation. Cooking was carried out by a local cook, and traditional dishes were prepared on locally built chulha or angithi cookstoves using brushwood or dung fuels. Cook fire emissions were collected throughout the cooking event in a Kynar bag (VOCs) and on polytetrafluoroethylene (PTFE) filters (PM2.5). Gas samples were transferred from a Kynar bag to previously evacuated stainless-steel canisters and analyzed using gas chromatography coupled to flame ionization, electron capture, and mass spectrometry detectors. VOC emission factors were calculated from the measured mixing ratios using the carbon-balance method, which assumes that all carbon in the fuel is converted to CO2, CO, VOCs, and PM2.5 when the fuel is burned. Filter samples were weighed to calculate PM2.5 emission factors. Dung fuels and angithi cookstoves resulted in significantly higher emissions of most VOCs (p < 0.05). Utilizing dung-angithi cook fires resulted in twice as much of the measured VOCs compared to dung-chulha and 4 times as much as brushwood-chulha, with 84.0, 43.2, and 17.2g measured VOCkgg fuel carbon, respectively. This matches expectations, as the use of dung fuels and angithi cookstoves results in lower modified combustion efficiencies compared to brushwood fuels and chulha cookstoves. Alkynes and benzene were exceptions and had significantly higher emissions when cooking using a chulha as opposed to an angithi with dung fuel (for example, benzene emission factors were 3.18gkgg fuel carbon for dung-chulha and 2.38gkgg fuel carbon for dung-angithi). This study estimated that 3 times as much SOA and ozone in the maximum incremental reactivity (MIR) regime may be produced from dung-chulha as opposed to brushwood-chulha cook fires. Aromatic compounds dominated as SOA precursors from all types of cook fires, but benzene was responsible for the majority of SOA formation potential from all chulha cook fire VOCs, while substituted aromatics were more important for dung-angithi. Future studies should investigate benzene exposures from different stove and fuel combinations and model SOA formation from cook fire VOCs to verify public health and air quality impacts from cook fires
Molecular composition of particulate matter emissions from dung and brushwood burning household cookstoves in Haryana, India
Emissions of airborne particles from biomass burning are a significant source of black carbon (BC) and brown carbon (BrC) in rural areas of developing countries where biomass is the predominant energy source for cooking and heating. This study explores the molecular composition of organic aerosols from household cooking emissions with a focus on identifying fuel-specific compounds and BrC chromophores. Traditional meals were prepared by a local cook with dung and brushwood-fueled cookstoves in a village in Palwal district, Haryana, India. Cooking was done in a village kitchen while controlling for variables including stove type, fuel moisture, and meal. Fine particulate matter (PM2.5) emissions were collected on filters, and then analyzed via nanospray desorption electrospray ionization-high-resolution mass spectrometry (nano-DESI-HRMS) and high-performance liquid chromatography-photodiode array-high-resolution mass spectrometry (HPLC-PDA-HRMS) techniques. The nano-DESI-HRMS analysis provided an inventory of numerous compounds present in the particle phase. Although several compounds observed in this study have been previously characterized using gas chromatography methods a majority of the species in the nano-DESI spectra were newly observed biomass burning compounds. Both the stove (chulha or angithi) and the fuel (brushwood or dung) affected the composition of organic aerosols. The geometric mean of the PM2.5 emission factor and the observed molecular complexity increased in the following order: brushwood-chulha (7.3±1.8 g kg-1 dry fuel, 93 compounds), dung-chulha (21.1±4.2 g kg-1 dry fuel, 212 compounds), and dung-angithi (29.8±11.5 g kg-1 dry fuel, 262 compounds). The mass-normalized absorption coefficient (MACbulk) for the organic-solvent extractable material for brushwood PM2.5 was 3.7±1.5 and 1.9±0.8m2 g-1 at 360 and 405 nm, respectively, which was approximately a factor of two higher than that for dung PM2.5. The HPLC-PDA-HRMS analysis showed that, regardless of fuel type, the main chromophores were CxHyOz lignin fragments. The main chromophores accounting for the higher MACbulk values of brushwood PM2.5 were C8H10O3 (tentatively assigned to syringol), nitrophenols C8H9NO4, and C10H10O3 (tentatively assigned to methoxycinnamic acid)
Recommended from our members
Impacts of household sources on air pollution at village and regional scales in India
Approximately 3 billion people worldwide cook with solid fuels, such as wood, charcoal, and agricultural residues. These fuels, also used for residential heating, are often combusted in inefficient devices, producing carbonaceous emissions. Between 2.6 and 3.8 million premature deaths occur as a result of exposure to fine particulate matter from the resulting household air pollution (Health Effects Institute, 2018a; World Health Organization, 2018). Household air pollution also contributes to ambient air pollution; the magnitude of this contribution is uncertain. Here, we simulate the distribution of the two major health-damaging outdoor air pollutants (PM2:5 and O3) using state-of-thescience emissions databases and atmospheric chemical transport models to estimate the impact of household combustion on ambient air quality in India. The present study focuses on New Delhi and the SOMAARTH Demographic, Development, and Environmental Surveillance Site (DDESS) in the Palwal District of Haryana, located about 80 km south of New Delhi. The DDESS covers an approximate population of 200 000 within 52 villages. The emissions inventory used in the present study was prepared based on a national inventory in India (Sharma et al., 2015, 2016), an updated residential sector inventory prepared at the University of Illinois, updated cookstove emissions factors from Fleming et al. (2018b), and PM2:5 speciation from cooking fires from Jayarathne et al. (2018). Simulation of regional air quality was carried out using the US Environmental Protection Agency Community Multiscale Air Quality modeling system (CMAQ) in conjunction with the Weather Research and Forecasting modeling system (WRF) to simulate the meteorological inputs for CMAQ, and the global chemical transport model GEOS-Chem to generate concentrations on the boundary of the computational domain. Comparisons between observed and simulated O3 and PM2:5 levels are carried out to assess overall airborne levels and to estimate the contribution of household cooking emissions
Bio-Ecology of the Louse, Upupicola upupae, Infesting the Common Hoopoe, Upupa epops
The population characteristics of the louse, Upupicola upupae (Shrank) (Mallophaga: Philopteridae: Ishnocera), infesting the Common Hoopae, Upupa epops L. (Aves: Upupiformes), were recorded during 2007–08 in District Rampur, Uttar Pradesh India. The pattern of frequency distribution of the louse conformed to the negative binomial model. The lice and its nits were reared in vitro at 35 ± 1° C, 75–82 % RH, on a feather diet. The data obtained was used to construct the life table and to determine the intrinsic rate of natural increase (0.035 female/day), the net reproductive rate was 3.67 female eggs/female, the generation time was 37 days, and the doubling time of the population was 19 days. The chaetotaxy of the three nymphal instars has also been noted to record their diagnostic characteristics. Information on egg morphology and antennal sensilla is also presented
Tracheostomy in the COVID-19 era: global and multidisciplinary guidance
Global health care is experiencing an unprecedented surge in the number of critically ill patients who require mechanical ventilation due to the COVID-19 pandemic. The requirement for relatively long periods of ventilation in those who survive means that many are considered for tracheostomy to free patients from ventilatory support and maximise scarce resources. COVID-19 provides unique challenges for tracheostomy care: health-care workers need to safely undertake tracheostomy procedures and manage patients afterwards, minimising risks of nosocomial transmission and compromises in the quality of care. Conflicting recommendations exist about case selection, the timing and performance of tracheostomy, and the subsequent management of patients. In response, we convened an international working group of individuals with relevant expertise in tracheostomy. We did a literature and internet search for reports of research pertaining to tracheostomy during the COVID-19 pandemic, supplemented by sources comprising statements and guidance on tracheostomy care. By synthesising early experiences from countries that have managed a surge in patient numbers, emerging virological data, and international, multidisciplinary expert opinion, we aim to provide consensus guidelines and recommendations on the conduct and management of tracheostomy during the COVID-19 pandemic
Recent Advances in Graph Partitioning
We survey recent trends in practical algorithms for balanced graph
partitioning together with applications and future research directions
Kinesin expands and stabilizes the GDP-microtubule lattice
Kinesin-1 is a nanoscale molecular motor that walks towards the fast-growing (plus) ends of microtubules, hauling molecular cargo to specific reaction sites in cells. Kinesin-driven transport is central to the self-organization of eukaryotic cells and shows great promise as a tool for nano-engineering1. Recent work hints that kinesin may also play a role in modulating the stability of its microtubule track, both in vitro2,3 and in vivo4, but the results are conflicting5,6,7 and the mechanisms are unclear. Here, we report a new dimension to the kinesin–microtubule interaction, whereby strong-binding state (adenosine triphosphate (ATP)-bound and apo) kinesin-1 motor domains inhibit the shrinkage of guanosine diphosphate (GDP) microtubules by up to two orders of magnitude and expand their lattice spacing by ~1.6%. Our data reveal an unexpected mechanism by which the mechanochemical cycles of kinesin and tubulin interlock, and so allow motile kinesins to influence the structure, stability and mechanics of their microtubule track
Taking Multiple Infections of Cells and Recombination into Account Leads to Small Within-Host Effective-Population-Size Estimates of HIV-1
Whether HIV-1 evolution in infected individuals is dominated by deterministic or stochastic effects remains unclear because current estimates of the effective population size of HIV-1 in vivo, Ne, are widely varying. Models assuming HIV-1 evolution to be neutral estimate Ne∼102–104, smaller than the inverse mutation rate of HIV-1 (∼105), implying the predominance of stochastic forces. In contrast, a model that includes selection estimates Ne>105, suggesting that deterministic forces would hold sway. The consequent uncertainty in the nature of HIV-1 evolution compromises our ability to describe disease progression and outcomes of therapy. We perform detailed bit-string simulations of viral evolution that consider large genome lengths and incorporate the key evolutionary processes underlying the genomic diversification of HIV-1 in infected individuals, namely, mutation, multiple infections of cells, recombination, selection, and epistatic interactions between multiple loci. Our simulations describe quantitatively the evolution of HIV-1 diversity and divergence in patients. From comparisons of our simulations with patient data, we estimate Ne∼103–104, implying predominantly stochastic evolution. Interestingly, we find that Ne and the viral generation time are correlated with the disease progression time, presenting a route to a priori prediction of disease progression in patients. Further, we show that the previous estimate of Ne>105 reduces as the frequencies of multiple infections of cells and recombination assumed increase. Our simulations with Ne∼103–104 may be employed to estimate markers of disease progression and outcomes of therapy that depend on the evolution of viral diversity and divergence
- …