Irrigation application efficiency and uniformity of water distribution using multi-outlet pipe and resource conservation technologies

Irrigation experiments were conducted during November to April under wheat crop in the winter season of 2012-13 and 2013-14 in the farmer’s field at Galibkhedi village located in Karnal District, Haryana State, India. In the study, collapsible multi-outlet pipe (MOP) along with single outlets pipe (SOP) was tested in farmer’s field under wheat cultivation. Irrigation was carried out in five treatments including tillage (T) with SOP and MOP; zero-tillage (ZT) with SOP and MOP, and furrow irrigation with raised bed (FIRB). Iso-time profile of waterfront spreading and advance indicated that irrigation water distribution was uniform under the plot irrigated using MOP as compared to plot irrigated using SOP. In addition, water distribution was uniform under zero tilled plots as compared to tilled plot. Results implied that MOP has several advantages over SOP in terms of application efficiency (AE) and uniformity of water distribution. Average application efficiency for the first study year was found to be in the order of ZT-MOP (82.41%) > FIRB (76.79%) > ZT-SOP (75.25%) > T-MOP (74.85%) > T-SOP (69.79%). Average application efficiency for the second study year was found to be in the same order as first year with some deviation in values. In the second year values of mean application efficiencies were ZT-MOP (82.58%) > FIRB (77.13%) > ZT-SOP (73.04%) > T-MOP (69.65%) > T-SOP (66.13%). Overall, this study concludes that irrigation under wheat crop using collapsible multi-outlet pipe (MOP) with zero tillage practices is a suitable option for surface irrigation that accomplishes uniform distribution of water with higher application efficiency

Design of an electrochemical micromachining machine

Electrochemical micromachining (μECM) is a non-conventional machining process based on the phenomenon of electrolysis. μECM became an attractive area of research due to the fact that this process does not create any defective layer after machining and that there is a growing demand for better surface integrity on different micro applications including microfluidics systems, stress-free drilled holes in automotive and aerospace manufacturing with complex shapes, etc. This work presents the design of a next generation μECM machine for the automotive, aerospace, medical and metrology sectors. It has three axes of motion (X, Y, Z) and a spindle allowing the tool-electrode to rotate during machining. The linear slides for each axis use air bearings with linear DC brushless motors and 2-nm resolution encoders for ultra precise motion. The control system is based on the Power PMAC motion controller from Delta Tau. The electrolyte tank is located at the rear of the machine and allows the electrolyte to be changed quickly. This machine features two process control algorithms: fuzzy logic control and adaptive feed rate. A self-developed pulse generator has been mounted and interfaced with the machine and a wire ECM grinding device has been added. The pulse generator has the possibility to reverse the pulse polarity for on-line tool fabrication.The research reported in this paper is supported by the European Commission within the project “Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)” (FP7-2011-NMPICT- FoF-285614)

Micro-manufacturing : research, technology outcomes and development issues

Besides continuing effort in developing MEMS-based manufacturing techniques, latest effort in Micro-manufacturing is also in Non-MEMS-based manufacturing. Research and technological development (RTD) in this field is encouraged by the increased demand on micro-components as well as promised development in the scaling down of the traditional macro-manufacturing processes for micro-length-scale manufacturing. This paper highlights some EU funded research activities in micro/nano-manufacturing, and gives examples of the latest development in micro-manufacturing methods/techniques, process chains, hybrid-processes, manufacturing equipment and supporting technologies/device, etc., which is followed by a summary of the achievements of the EU MASMICRO project. Finally, concluding remarks are given, which raise several issues concerning further development in micro-manufacturing

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

Nuclear Technology' held at Multipurpose Hall

A b s t r a c t 125 I -bone densitometry sources find extensive application in the diagnosis of osteoporosis by using single photon absorption (SPA) technique. Silver pellets of size ~ 2.5 mm (f) x 0.6 mm (l) were developed as base matrix for adsorption of 125 I. Determination of specific surface area and pore size analysis of plain silver and palladium coated silver pellets was carried out. Experimental conditions for quantitative adsorption of 125 I were optimized and the sources containing upto ~ 1.48 GBq of 125 I were prepared. The leachability of sources was found to be < 0.01%. Such 125 I -bone densitometry sources developed at our end have potential of application in the diagnosis of osteoporosis after encapsulation of sources within titanium capsules