Structural Routability of n-Pairs Information Networks

Information does not generally behave like a conservative fluid flow in communication networks with multiple sources and sinks. However, it is often conceptually and practically useful to be able to associate separate data streams with each source-sink pair, with only routing and no coding performed at the network nodes. This raises the question of whether there is a nontrivial class of network topologies for which achievability is always equivalent to routability, for any combination of source signals and positive channel capacities. This chapter considers possibly cyclic, directed, errorless networks with n source-sink pairs and mutually independent source signals. The concept of downward dominance is introduced and it is shown that, if the network topology is downward dominated, then the achievability of a given combination of source signals and channel capacities implies the existence of a feasible multicommodity flow.Comment: The final publication is available at link.springer.com http://link.springer.com/chapter/10.1007/978-3-319-02150-8_

Mechanical Behavior and Microstructural Development of Low-Carbon Steel and Microcomposite Steel Reinforcement Bars Deformed under Quasi-Static and Dynamic Shear Loading

Reinforcement bars of microcomposite (MC) steel, composed of lath martensite and minor amounts of retained austenite, possess improved strength and corrosion characteristics over low-carbon (LC) steel rebar; however, their performance under shear loading has not previously been investigated at the microstructural level. In this study, LC and MC steel cylinders were compression tested, and specimens machined into a forced-shear geometry were subjected to quasi-static and dynamic shear loading to determine their shear behavior as a function of the strain and strain rate. The as-received and sheared microstructures were examined using optical microscopy (OM), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). Higher-resolution microstructural examinations were performed using transmission electron microscopy (TEM). The influence of the starting microstructure on the shear behavior was found to depend strongly on the strain rate; the MC steel exhibited not only greater strain-rate sensitivity than the LC steel but also a greater resistance to shear localization with load. In both steels, despite differences in the starting microstructure, post-mortem observations were consistent with a continuous mechanism operating within adiabatic shear bands (ASBs), in which subgrains rotated into highly misoriented grains containing a high density of dislocations